Nicely done Phil you are good on camera and you come across really good no waffle etc keep it up like what you do I'm going to DM you in a minute 🤞🤞👍👍
@PhilBrindley
3 жыл бұрын
Thanks mate, that's very kind of you to say. 🤙
@BigSungHobbies
3 жыл бұрын
Great job on the install video. I was just installing 1800kv Fusion on my TRX4, and my install video will be coming up shortly as well. As for cutoff voltage, Intermediate (default) is 3.2v/cell, Low is 3.0v/cell and High is 3.4v/cell. I was debating about installing fusion on Ecto, but I think I am going to stay brushed setup.
@PhilBrindley
3 жыл бұрын
Thank you sir! I'm very impressed with the Fusion setup. Been tempted by one for ages and nearly got one for my GSpeed rig. Glad I finally went for it on the Ecto though. Look forward to seeing it on the TRX4. Thanks for the voltage info, might switch it to high, 3.2v feels a bit low for my liking.
@BigSungHobbies
3 жыл бұрын
@@PhilBrindley My main concern on Fusion was 2-1 unit, but I have been hearing that it's pretty reliable. First impression so far, I am pretty impressed with it. I think it will work really well on Ecto. I debated it trying it out on Ecto vs. TRX4, but I ended up putting it in TRX4. As for voltage cutoff, 3.4v might be safer bet. I am going to try the default intermediate setting and see how that works.
@michelebonomo6901
2 жыл бұрын
Ottimo lavoro! Complimenti.
@PhilBrindley
2 жыл бұрын
Thank you. 🤙
@CashFedorvich
9 ай бұрын
Can I get a video on all the parts in the build? I think the truck looks amazing and would like to build something similar
@Joey.Boogie
13 күн бұрын
Great video, new subscriber. My Fusion 1800 kv motor arrives this week and I didn’t think about the lighting system. Where did you end up running your lights from? Thanks
@PhilBrindley
13 күн бұрын
@@Joey.Boogie can’t quite remember and don’t have the truck now. I think I just ran them from a 5v and ground on the receiver.
@WreckitRalphie
3 жыл бұрын
Nice truck!!
@PhilBrindley
3 жыл бұрын
Thanks 😎🤙
@ekpauly
3 жыл бұрын
Very nice! I have an axe setup in one of my trucks and I really like it. But Ive been wanting to try one of the fusions, I wish the had a little higher kv options though.
@PhilBrindley
3 жыл бұрын
Thanks. Yes, a 2100 or 2200 would be awesome would have more pinion options for sure.
@curillanl
2 жыл бұрын
Hey Phil great video! I love this truck 💗 where can I find those windows and the fan on the back? Thanks in advance and keep crawling! 😀 Great channel.
@PhilBrindley
2 жыл бұрын
Thank you! Both things are 3D printed. The radiator and fans are technically for a Capra, but scaled up to 120% they work perfectly. The nets are just a printed grid that I trimmed to fit. They are printed with a flexible TPU filament. Hope that helps. 🤙
@curillanl
2 жыл бұрын
@@PhilBrindley thank you!!!
@rcflashcars
3 жыл бұрын
cool job! big like! 👍👍👍
@PhilBrindley
3 жыл бұрын
Thank you! Cheers! 🤙
@shafiqjan1474
2 жыл бұрын
This system is next. I decided to get an AXE system for my element build.
@PhilBrindley
2 жыл бұрын
It'll go well with an AXE system in it that's for sure! 🤙
@al-baghdadi7854
Жыл бұрын
Hello what do you think about outrunner Motors ? I am about to buy an ecto but These brushless Motors are very expensive
@PhilBrindley
Жыл бұрын
The outrunner motors are cheaper, but the esc for them is super expensive. Take a look at the new Hobbywing Fusion Pro range. They look like very good value.
@al-baghdadi7854
Жыл бұрын
@@PhilBrindley yes i think i will buy an Fusion SE
@evo165
2 жыл бұрын
How is the fusion speed compared to stock 14t motor?
@PhilBrindley
2 жыл бұрын
It feels a little slower to me, but not much. I don't tend to use full throttle much but am hoping to get out on Monday with mine and a pretty much stock Ecto so I can do some side by side tests!
@heady2008
3 жыл бұрын
Yep, the Fusion is an awesome powerplant. I'm running it in my SCVX10 II,HPI Venture and RST bitsa but for now I'm running a 1080 esc and stock motor in my Ecto kzitem.info/news/bejne/p4mfu6Cgp4SIdZw
@PhilBrindley
3 жыл бұрын
I think the 1080 and stock motor are a great combo for the Ecto. I only really went with the Fusion as I've been wanting to try one for ages 🤪🤙
Пікірлер: 28