My pops makes those roll cages for the last 30 years!! The one and only the legend.
@joshwalling4633
Жыл бұрын
Heck yeah! That’s awesome
@ozzychila
5 жыл бұрын
Such an OEM install in terms of high quality installation 👍 you lads nailed it
@joshwalling4633
5 жыл бұрын
Thanks man!
@Benv32
4 жыл бұрын
hey do you know where you can still get that thomas sport brace? i had one in my old r32 but i can't seem to find it anymore...
@joshwalling4633
4 жыл бұрын
Thomas sport brace?
@Benv32
4 жыл бұрын
@@joshwalling4633 the unibrace that bolts to the rear strut towers inside the car. yours might not have been made by thomas sport but looks exactly like the one i used to have that was made by them
@joshwalling4633
4 жыл бұрын
Oh yeah, no clue on what type or brand that one was.
@prostatusbro
4 жыл бұрын
I was thinking of buying one of these used, glad I watched this and saw the door cards need trimming. Thanks boys.
@joshwalling4633
4 жыл бұрын
Yeah, putting in a cage is a huge commitment, and this would be a cage that requires the LEAST commitment hahaha
@JoeCastroIV20
7 жыл бұрын
Loving the updates on the R32 Josh! Great video content! These DIY videos are definitely helpful to a lot of people even tho they comment or like the damn video. I KNOW good content when I see it! 👍🏽
@R32vw
7 жыл бұрын
yup
@kevinlarsonmedia
7 жыл бұрын
Thanks for the shout out. Brains car is starting to become like mine! More time sitting and less time driving.
@R32vw
7 жыл бұрын
Nice
@DeluxeBurger01
6 жыл бұрын
This video is convincing me to buy this Roll Bar. Thanks! Going to use as a walk-through too!
@DeluxeBurger01
6 жыл бұрын
Quick Question, how are harnesses working (mounting the lap belts)? Or keeping the stock 3 points? How did all of that work?
@DeluxeBurger01
6 жыл бұрын
Joshua Walling yeah, I was asking more of the golf specifics. I cant find much for the mk4. Didn't know if this R32 was running harnesses with the Brides. Or if it's the stock 3 point, is the "latch" a simple swap? Haven't torn my seats apart...
@em1ownerify
Жыл бұрын
Going to install one in my mk6. How hard was the bottom bolts? You didn’t show the drilling part What do I do for rust prevention
@joshwalling4633
Жыл бұрын
None of this was difficult, just scary drilling holes into your car. For rust prevention I would use some automotive paint to cover the raw metal.
@ElReySupr3me
7 жыл бұрын
I just found this channel, and u two are truly making me lean to getting a r32 over a new si.
@ElReySupr3me
7 жыл бұрын
I am waiting for the person to respond back to me from their listing. It is hard to find a mint one here in California. Although I have a question for you. Would you use a r32 for a daily. Or would it be more of a car you take out once or twice a week?
@ElReySupr3me
7 жыл бұрын
Joshua Walling I'm sorry to hear that, and I agree. I'll do more research. Thank you again.
@kottyking
7 жыл бұрын
how did you get rid of your notch? new hood or is it filled? I'm in Madison, can you recommend a good body/ paint guy?
@bryanmcmahon2475
7 жыл бұрын
Ryan No Thanks Joshua will be able to help you out his guy is in Milwaukee area but does amazing work.
@R32vw
7 жыл бұрын
Theres tons of ways, im making a video soon on a how to, also i know a good guy in madison if you PM me.
@_shtboxgarage
5 ай бұрын
Link doesn’t work do you know the part number?
@YalVKeeZ
4 жыл бұрын
Can I stall this same kind of 4 point cage in my mk5 R32 but without removing the back seats ?
@joshwalling4633
4 жыл бұрын
Usually, cages like this require some trimming of the panels, but you should be able to keep the back seats, you just might have to uninstall them to get the cage mounted to drill the holes and reinstall them after.
@tastytastytots
5 жыл бұрын
hey josh! I know the R32 is sold now, but I was wondering if Bryan flocked his centre console? also wondering where he got those cup holder inserts... that would be super nice to have as flocking is pretty hard to clean I hear
@joshwalling4633
5 жыл бұрын
Center console was wrapped in alcantara and had some custom work done to simplify the console and had custom metal cup holder inserts. A shop called NW Crafted did it all, hit them up on IG :)
@tastytastytots
5 жыл бұрын
@@joshwalling4633 thanks for the quick reply, I sent them a DM! I mentioned your channel too lol
@joshwalling4633
5 жыл бұрын
I don’t think he knows about my channel haha, but if you check @shadesbro on IG you might be able to find a picture of his R32 to help him remember Bryan’s R32
@rickyr4829
3 жыл бұрын
Where u get the gray brace in the back?🧐😳
@iamctorn
2 жыл бұрын
Hi, can you tell me what is the car code color? :))
@AdrianMartinez-mx9kf
5 жыл бұрын
I have a question, what material did you use for the bar?
@joshwalling4633
5 жыл бұрын
This is an Autopower Roll bar, not custom.
@brock32
4 жыл бұрын
Where can I find these?? The page doesn't exist any more
@joshwalling4633
4 жыл бұрын
This was made by Autopower, so you can order directly through the manufacturer
@sylvainjak
5 жыл бұрын
Price plz
@JoeCastroIV20
7 жыл бұрын
Now come fly to MD and let's make a DIY suspension video on my Golf R! 😊
@Joverine
7 жыл бұрын
Love these vids, keep 'em coming!
@juanantoniorosales3553
3 жыл бұрын
What's the name of this roll cage company 🤔
@joshwalling4633
3 жыл бұрын
Autopower, it’s in the title
@jmathis2aug
4 жыл бұрын
Can you maintain the rear seat with this bar??
@joshwalling4633
4 жыл бұрын
No clue. I’m sure it would take some cutting and trimming to make it work. Either way though, the back seats would be dangerous for passengers after you install this. The company might know, maybe shoot them a message?
@maveric0738
7 жыл бұрын
Great Job!
@creepingjesus9740
4 жыл бұрын
Omg what steering wheel is that 😍 I want that so bad !
@joshwalling4633
4 жыл бұрын
Renown
@R32vw
7 жыл бұрын
Cool vid
@dorseydave
7 жыл бұрын
Dig it Bryan 🖤
@napoleonjones8066
5 жыл бұрын
Madison, WI?
@joshwalling4633
5 жыл бұрын
Yup!
@napoleonjones8066
5 жыл бұрын
Josh Walling awesome. I’m from Milwaukee. Love both the cars!
@joshwalling4633
5 жыл бұрын
I live in MKE as well, this shop was just in Madison
@napoleonjones8066
5 жыл бұрын
Josh Walling that’s awesome!!! I’m gonna be picking up a R32 sometime next week.
@ct0
7 жыл бұрын
more r32 content!
@pavelsanchez2848
7 жыл бұрын
👌
@stanlee7635
4 ай бұрын
Don’t use stainless hardware for this. Use grade 8.
@pacocaddy3097
4 жыл бұрын
Super 👍💪😄🏁👍
@klubstompers
7 жыл бұрын
No need to cut the carpet.
@hondagang1831
6 жыл бұрын
Autopower instructions say it may be mounted over or under the carpet
Пікірлер: 62