This video was very helpful, especially with the neck, the side guards on the head and knees. Super glue, paper towel and my box cutter were practically my best friends when improving on this guy. He's borderline perfect now.
@KMama-vs6np
3 жыл бұрын
Great video. Very in depth! FYI, try tightening the screws in thighs and legs first before disassembling and adding glue. This worked for me. But I realize I may have been lucky.
@user-tf8jy5iy8r
3 жыл бұрын
덕분에 짱짱한 메가트론으로 다시 태어났습니다👍
@thedude4450
3 жыл бұрын
You have very concise and clear explanations in your videos.
@antoniomiguelgabriel8115
2 жыл бұрын
thank you for showing how to fix some rachet joints, now I'm able to fix my LS-03f Optimus prime
@prettyoddartofvolatile
Жыл бұрын
Very helpful, thank you so much for your efforts, and I even bought the same electric screwdriver that you told me about
@michaelscholes8956
4 ай бұрын
which screwdriver plz?
@electricbluee
2 жыл бұрын
Hi there, I know it's an old video but are you consider getting the BS-03 Challenger KO and making a video on how to fix its shoulder joint. The ratchet joint is known for breaking even with the metal part fix. Great video btw!
@arcanetoy
2 жыл бұрын
hi I got that replacement part. But I haven't tried replacing it yet. I'm too lazy to play games. I came up with some ideas for the shoulder of the BS-03. However, because the material is special, it does not adhere. I'm still thinking about it, but if I come up with a good idea, I'll share it in a video. thank.
@N7gamer1337
2 жыл бұрын
I just ordered mine, so this will be super helpful when it arrives 😊 thank you! Edit: so I tried on UT challenger and it worked perfectly!
@eldoggyfreaky
Жыл бұрын
Es un molde de excelente calidad, y con estas mejoras queda prácticamente perfecto
@PNS84
3 жыл бұрын
Thank you so much!!! I fixed the head and got the 180 degree arm rotation. Your videos are amazing!!!!!I was also wondering what kind of glue you used in the video?
@arcanetoy
3 жыл бұрын
The one I use is a local brand, but it will be the same as loctite 401. Thanks
@PNS84
3 жыл бұрын
@@arcanetoy I also saw many videos about kiki fix loose joints. I was wondering if that would work also?
@arcanetoy
3 жыл бұрын
@@PNS84 Looking for the kiki fix Loose Joints Action Figure, this product has water-soluble ingredients and slow drying speed. I guess it's the same ingredient as varnish. This, of course, seems to work. But I'm impatient so I can't wait for it to harden slowly. So I'm using instant glue that works fast. I think you can choose the product according to your work style or preference. thanks
@PNS84
3 жыл бұрын
@@arcanetoy Thanks a lot
@GirlsPanzer
2 жыл бұрын
새로나온 블랙맘바 기사옵 개조 영상도 부탁드려요! 좋은영상감사합니다. 정말 최고에요
@arcanetoy
2 жыл бұрын
네 제품을 주문한 상태입니다. 중국 설이 껴있어 언제 배송될지는 모르지만 준비 하고 있습니다. 감사합니다.
@nekovanguard9553
3 жыл бұрын
Damn, never thought that BMB dragoon would be this loose out of the box. Great tutorial, wish i had some of your confidence since i'm sure i would messed up lol.
@arcanetoy
3 жыл бұрын
You need to make a bold attempt. It doesn't matter if it's ruined. It's just a toy.
@nekovanguard9553
3 жыл бұрын
@@arcanetoy Well it is cheaper than UT but its still rather expensive for me so i won't take any chance buying it in the first place if i had to modify it to make it worth having in my collection lol. But yeah i got your point, if i'm doing this i need to take risk.
@arcanetoy
3 жыл бұрын
@@nekovanguard9553 The tasks I introduce are low-risk, so I think it's better to try them one by one. If the instant glue hardens into the wrong shape, it can be removed. It falls off when soaked in hot water.
@arcanetoy
3 жыл бұрын
As soon as I use it, the glue is a lactite product. For example, lactite 401
@nekovanguard9553
3 жыл бұрын
@@arcanetoy Aight, thanks for the extra tips bro. I'll try some of your mods if i ended up picking this guy lol.
@yoshikagekira3923
3 жыл бұрын
Very helpful video! I really like your videos and how clear and helpful they are.
@nhthanhvf05
3 жыл бұрын
Very usefull 🍓
@jaychazformers9547
3 жыл бұрын
Wow your video is very helpfull and now I want to fix my bs02 megatron. Btw thanks for the tips 👍🏻😁
@brandonojeda716
Жыл бұрын
thanks a lot man! got mine not even a week ago and now hes all better becvaus eof all these fixes you guided me through. just wondering if you can also do a fix this and that for broken ratchet joints and a snapped arm on the monocrat mt01 Megatank. I got that figure and the ratchets in his knees were broken out of the box for some reason.
@arcanetoy
Жыл бұрын
I do not have this product. monocrat mt01 Megatank If I ever get a chance to check out someone else's, I'll take a look. thanks
@ifanthanese
3 жыл бұрын
Thank you!
@blockx6098
Жыл бұрын
Please make a video to fix MegaTank Monocrat MT-01 deadeye. 🛐
@arcanetoy
Жыл бұрын
I don't own that product. I'll make a video when I get it. thanks
@blockx6098
Жыл бұрын
@@arcanetoy thank you!
@coltongelinas7601
Жыл бұрын
Is the white pin on the back of his head supposed to be the switch for his eyes? When I plugged in the batteries it always stays on no matter what and I don't know how to fix it if I'm supposed to
@arcanetoy
Жыл бұрын
It is possible that the switch part is bad. Check if the groove where the switch protrudes is not too tight. The groove may be tight and the switch is always depressed. thanks
@yoshikagekira3923
3 жыл бұрын
Could I ask you a couple questions? Besides flipping his arm to get it straight down what modifications would be nessasary to have it be straight down? I'm having trouble pegging his sword on his back. Should I trim the peg or the hole with a hobby knife?
@arcanetoy
3 жыл бұрын
Other than turning the arm upside down, you can consider chipping off the armpit of its chest. You can't see it well in beagle mode or robot mode. But I just flipped it over to secure the angle of the arm joint. When you fix the knife on your back, trim the edges of the pins that are inserted to make it easier for you. Don't trim the whole thing, just trim the edges.
@yoshikagekira3923
3 жыл бұрын
@@arcanetoy Thank you very much 😊
@JosefBlake
5 ай бұрын
@@arcanetoyhi so i need help attaching the landing gear for megatron thats like the landing gear on the front chest i need help attaching kt
@King_Ancalagon
3 жыл бұрын
What kind of screwdriver did you been using and kind of knife is that?
@arcanetoy
3 жыл бұрын
The drivers and knives I use are normal things. The driver is Xiaome mijia electric screwdriver. A knife is any art knife.
@King_Ancalagon
3 жыл бұрын
@@arcanetoy Thank you. I hope Channel get big soon.
@nguyenlac2786
2 жыл бұрын
what is the name of the glue you use and the red bottle too
@arcanetoy
2 жыл бұрын
The one I use is a local brand, but it will be the same as loctite 401. I recommend silicon grease. It doesn't react with rubber and plastic. www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2 Thanks
@nguyenlac2786
2 жыл бұрын
@@arcanetoy thanks :333
@walkers198
3 жыл бұрын
Please state the lubricants and glues you used- even buy product. Thank you
@arcanetoy
3 жыл бұрын
The one I use is a local brand, but it will be the same as loctite 401. I recommend silicon grease. It doesn't react with rubber and plastic. www.amazon.com/s?k=Silicone+Grease&ref=nb_sb_noss_2 Thanks
@robertfang8437
3 жыл бұрын
If the quality is this bad I will pass on it..
@NestorCorrea1
3 жыл бұрын
Does anybody know what kind of glue was used to tighten the knee joint
@arcanetoy
3 жыл бұрын
The one I use is a local brand, but it will be the same as loctite 401. Thanks
@kolesnik_nikolay
3 жыл бұрын
Hello! How is it possible to fix the head of the original unique toys Megatron?
@arcanetoy
3 жыл бұрын
I don't have unique toys Megatron. Looking at the relevant data, I think the structure of the head is different. I think you should refer to my method and find a way yourself.
@SSSPrinceBruce
3 жыл бұрын
First of all , you have done a Amazing Job ! Wich Glue are you using? l know it’s Loctite but wich model ?
@arcanetoy
3 жыл бұрын
The one I use is a local product, so it may be a little different from loctite, but I think 401 will be similar.
@Me-yx6xi
3 жыл бұрын
Pls make a video how to replace battery and repair face light on mechanical alliance sx01 thunderwing (blitzwing)
@arcanetoy
3 жыл бұрын
I'm sorry. I don't have any plans to purchase the product, so I don't think it'll be possible to make
@baronb2275
3 жыл бұрын
Mn 🤯
@user-mk7dz2uw5v
2 жыл бұрын
접착제하고 구리스 정보좀 알수있을까요...?
@arcanetoy
2 жыл бұрын
접착제는 다이소에서 구매한 오공 순간접착제 입니다. 아무거나 쓰셔도 돼요. 구리스는 제가 쓰는 게 지금은 제품명이 기억이 안 나는 데 실리콘그리스 검색하셔서 나오는 것을 구매하시면 동일한 효과의 제품을 사실 수 있을 겁니다. 감사합니다.
@user-su6fd1yd9o
3 жыл бұрын
이렇게 보강 시, 변신은 정상적으로 가능한가요? 아니면 로봇모드 전시용으로만 유효한가요?
@arcanetoy
3 жыл бұрын
제 변신 영상은 이런 보강작업 후에 촬영 한 것입니다. 관절에 접착제 사용 시 완전히 고정하도록 접착하는 것이 아니라 관절을 조금 뻑뻑하게 해주는 것입니다. 감사합니다.
Пікірлер: 66