That's a kick ass exhaust man. Really looks nice on this bike.
@djwarren5081
9 ай бұрын
Love these videos. Proper engineering and top quality products.
@ScottyPilot
9 ай бұрын
copper anti-seize is the best for the O2 sensor threads, they'll come back out a few years later much easier than any other method.. We used it in aviation since forever ago. Great step by step mate, love your work.
@racingrooster4642
9 ай бұрын
Great looking and sounding system , wish I had a Goldie ,because I'd definitely fit that it and the weight saving is amazing . very informative video.👍
@lauriebloggs8391
6 ай бұрын
Looks SO much better. The standard one with that weld seam, just looked so naff..........this is better in every way.
@philpeacock7803
9 ай бұрын
Wow, sounds stunning. Job well done.
@johnsonya3401
9 ай бұрын
All we need now is for the BSA Gold Star to become available in Australia!! How much longer do we have to wait I wonder?
@kevindarkstar
9 ай бұрын
Looks like a cracking exhaust with a great sound 😊
@DavidSkidmore-e5t
9 ай бұрын
That possibly the best upgrade on that bike...👍👍👍
@davidyersz8668
8 ай бұрын
Sounds great I love this bike because its a back to basics bike without all the usual confusing Tech that you just don't need and also with 45 usable horse power all you ever need, this bike in any colour is STUNNING
@jeremykeller211
6 ай бұрын
You forgot to check the weight!
@neilgill2269
Ай бұрын
Looks like lots of folk like it,and some are clueless as to what old school,(retro)motorcycles are all about....nice to see someone putting time and effort into making custom bits,those that can, do,those that can't,stand in the way making stupid comments!...nice job matey..bit like the old dunstal mega.
@UncleWally3
9 ай бұрын
Thanks for providing the aims of the project. If for no reason other than to compare them with our own priorities, it would be interesting to rank those aims.
@kevindarkstar
4 ай бұрын
Might I suggest you consider an alternative clock mount bracket for the bike which angles the clocks back towards the rider more 👍🏻
@Mahatma618
9 ай бұрын
Sounds awesome
@ssstryker6136
9 ай бұрын
Sounds good, reset at 24, sound check at 25. Looking forward to a fly by.
@chrisdowns3725
9 ай бұрын
This looks so good. I wonder wether you could make some kind of heat exchanger radiator to fill the gap left from the cat?
@mustard1965
2 ай бұрын
Great video, very detailed - Loved it!!
@RR-ql4lg
5 ай бұрын
Nice setup! Kind rgds. from Germany, Robert
@Between-Bikes
9 ай бұрын
Very neat & tidy, great mod. Two issues, video did pick up an increase in level of sound (how much louder is it?) & would this mod void insurance due to the increase in performance?
@georgemilburn6213
9 ай бұрын
We don't claim extra power or produce power charts for this very reason
@geneahart5607
9 ай бұрын
Nice system George, would like to here it under full throttle.
@georgemilburn6213
9 ай бұрын
when the weather allows I will do some ride by videos
@michaelhayward7572
9 ай бұрын
Excellent. Now just need something to replace that hideous clipped on "pushrod tube"....
@davidmacgregor5193
5 ай бұрын
Yes, it looks like a hastily performed after thought.
@roberthocking9138
9 ай бұрын
I noticed your new system bypassed the CAT. Interesting that it would be legal
@silverback3926
8 ай бұрын
Very interested in this bike. I think it's what royal Enfield should have done instead of the shotgun. Great upgrade to my classic 500. My concerns is the valve adjustment and oil change seems more involved than the interceptor. Especially if you need shims. Second I would desire same performance as interceptor. By that i mean DNA e kind of peppiness, ability to maintain 65 to 75 long term highway driving.
@jonathanmellish4439
2 ай бұрын
That sounds quite a bit louder. Nice shiny cases on the bike.
@nationalfluidpowercentrelt4523
8 ай бұрын
I would have said that cover that's near the cylinder head keeps the pipe hot for the oxygen sensor????? if the sensor isn't getting that hot wouldn't the ECU weaken the mixture to make it hotter so the ECU would be happy????
@BijitTalukdar728
Ай бұрын
How does it look with a clubman bar or drag bar, can you show us??
@HorseMalone
8 ай бұрын
Certainly looks the part. What is needed now are replacement longer studs and a proper large finned exhaust clamp. Problem is most owners would snap the existing studs in the head when removing them. Edit... Would not be beyond your engineering skills to manufacture a large finned clamp with recessed mounting holes and special nuts with a shoulder to fit. Can the idle RPM be reduced to get a better Bof, Bof, Bof sound ?
@lovingmylifeasIage6741
9 ай бұрын
Nice looking bike.
@NeilIves
7 ай бұрын
I understood that removing the catalytic box is not allowed by law. Also, are the insurance companies ok with it?
@petejones1957
6 ай бұрын
I was just about to ask the same question, what about MOT's in the future?
@petejones1957
6 ай бұрын
Just seen someone's answered that further dorwn, No problems!
@robertbeighter6336
8 ай бұрын
I want one, now, how can I get the bike in New Zealand?
@andymushlarky7819
6 ай бұрын
Looks the dogs, it does seem rather loud though, is that just an anomaly of the recording?
@madbadger85
9 ай бұрын
I’m sure there will be a power commander out soon for this bike.
@Doctorevil666
6 ай бұрын
Why power commander just a remapping of the original ECU we are after all in the 21st century aren't we
@TECBikeParts
2 ай бұрын
Fuel x now available for this bike
@rover100bunson
9 ай бұрын
do you have a steering damper that will fit continental gt650 please
@cecilwilson5442
9 ай бұрын
Proper British engineering and I hope they have apprenticeship on the go we have here in Northern Ireland at Harland and Wolff ship repair and it is great 👍,, that's a cracking exhaust system,, like their products ☘️☘️☘️☘️☘️☘️
@anythingoldmechanical
3 ай бұрын
Very nice Job, but the new goldies, will never have the noise or sound, of an original! But this has to be a massive improvement, on the factory fitted pipe that makes the goldie sound more like a Honda CG 125.
@stevepalmer5670
8 ай бұрын
Would have looked better with a Gold star type silencer.
@stevewilliams5428
9 ай бұрын
So what were the dyno figures?
@Rebel-Forces-Earth-007
3 ай бұрын
I wonder if that god-awful BSA factory radiator can be replaced with the smaller and less conspicuous radiator from a 2024 Triumph Bonneville.
@pggp273
9 ай бұрын
I prefer the original OEM Exhaust both in looks and sound but each to their own
@S2000Y
9 ай бұрын
So without the CAT will it pass an mot when the time comes?
@georgemilburn6213
9 ай бұрын
Yes it will pass a UK mot as no emission test for bikes, Exhaust just need to be 'not excessively noisy' in the opinion of the tester. I used to be an MOT tester.
@Baloski46
9 ай бұрын
What can be done about the ugly hole left by the cat?
@georgemilburn6213
9 ай бұрын
I have plans for that, but work in progress just now, one idea is to relocate the coolant tank so we could fit a mainstand. But also looking at other options
@Baloski46
9 ай бұрын
@@georgemilburn6213 the engine sits so high in the frame do you think that would effect the centre of gravity?
@georgemilburn6213
9 ай бұрын
No, but the bike does feel lighter and for the better
@hctim96
9 ай бұрын
Great place to warm your lunch? pasty anyone?
@Baloski46
9 ай бұрын
I can’t help but think the BSA’s and all the other marques of the past slung their engines low to improve centre of gravity. If it looks right it probably is. If it don’t it ain’t. Just saying. Ps I’m an owner of a rotax engined bike and I love it!
@besenwieslersepp1011
9 ай бұрын
I dont know, how the Gold Star sounds with OEM System, bit this sounds cheep.
@georgemilburn6213
9 ай бұрын
sound on video not as real life as was via my lapel mike
@goog2231
9 ай бұрын
All you need now is a wiring loom kit to bypass the ECU and a carb kit to make it into a real motorcycle.
@kevinmurtagh3434
3 ай бұрын
I superglue the gasket to the pipe
@robertmountfort6519
2 ай бұрын
Always change the gasket
@alangoldsmith4527
9 ай бұрын
man beautiful system but must be the biggest waffle on you tube
@MHLivestreams
9 ай бұрын
Better to have just a straight pipe, rockers don't have silencers. By the way, having a lighter exhaust doesn't lower unsprung weight, think about it.
@georgemilburn6213
9 ай бұрын
If you listen carefully I say sprung weight
@richardcox1794
7 күн бұрын
Now to get rid of that truck radiator.
@mfs5493
7 ай бұрын
Who are "we"?
@georgemilburn6213
6 ай бұрын
the development team at TEC bike parts
@gaza1952
3 ай бұрын
I imagine it would be much easier to accidentally be burnt with this stainless system.
@billykershaw2781
5 ай бұрын
Crackin accent....
@bryanduncan1640
8 ай бұрын
When is somebody going to tune the shit out of one of these like they were in ‘59 instead of pussy-footing around with standard bars, fuel injection and all that environment crap?
@bananabrooks3836
6 ай бұрын
Apparently the Rotax 650 is not easily tuned so not many parts available beyond the usual air filter/exhaust 'derestrictions'.
@jeremykeller211
6 ай бұрын
Take this superlight device and use it to spread superlightness to the rest of this overweight barge. Shame on the emptyheaded designers for daring to call this thing a Goldstar.
@ianmcdiarmid4563
9 ай бұрын
Saving 7.4 kg make the bike feel peppier? Whatever....
@MHLivestreams
9 ай бұрын
Would make a good hardtail chopper, definitely faster then!
@andysmith2013
9 ай бұрын
Or save yourself £2500 and buy a 40bhp 170kilo 400 Triumph.
@georgemilburn6213
9 ай бұрын
we have one on order, but not everybody has the same tastes
@andysmith2013
9 ай бұрын
Sorry about the typo, the Triumph is 179 kilos. Apologies.
@hydrotricine
9 ай бұрын
@@andysmith2013 In Europe it will be 170 kilos, we don't have the sari guards and other stuff from the asian market
@zedcharlie
9 ай бұрын
I paid 5495 for my bsa new. Right price. Think they overpriced them but a few dealers doing deals. Think the triumph is very nice. Bsa is lovely torquey motor. 40hp from a 400 will be a revvy motor but that's OK.
@РусланЯрулин-ж8е
7 ай бұрын
The Triumph 400 produces its 40 horsepower at 9k rpm, and its appearance is more youthful and catchy, while the BSA is a more classic motorcycle and is more for a measured ride, producing its 45 horsepower already at 6.5k rpm. I like triumph motorcycles, and the speed 400 is also a cool motorcycle, but still these are very different motorcycles, although formally both are classic. And yes, the exhaust is fire! Great view and sound!
@pggp273
3 ай бұрын
This nonsense is like re inventing the wheel for the sake of it. Theres nothing wrong with the OEM exhaust.
@chrisarmour6634
Ай бұрын
Thank you for your opinion. Unfortunately it's not shared by everyone.
@michaelnielsen2096
8 ай бұрын
I wonder if he produces a lot of saliva since he swallows loudly all the time, quite disturbing to listen to.
@georgemilburn6213
8 ай бұрын
sorry,but I was just getting over a cold.
@trevortrevortsr2
9 ай бұрын
I wonder don't you feel guilty selfishly polluting the atmosphere for the sake of vanity "A catalytic converter is an exhaust emission control device which converts toxic gases and pollutants in exhaust gas from an internal combustion engine into less-toxic pollutants"
@rover100bunson
9 ай бұрын
maybe its offset by not using more fuel to carry 7kg around, ive removed around 20kg from my royal enfield
@gmatty2975
9 ай бұрын
Great Thunberg... Is that you? ;0)
@user-rf9me7xm1w
9 ай бұрын
Definitely on par with all the coal fired power stations being built in China and all the factories churning out E.V’s. It’s a great mod and makes the bike look more like the original.
@georgemilburn6213
9 ай бұрын
let he who is without gilt cast the first stone
@kasperkjrsgaard1447
9 ай бұрын
I most certainly don’t feel the slightest guilt in anything pollution related. I haven’t had any cat on my motorcycle since 2009 and just to improve the matter, the Lambda is removed as well.
@MrHarleyoldfart
5 ай бұрын
It really is so much easier to unplug the 02 sensor.
Пікірлер: 108