Couldn’t you have just put an engine riser and took the tank off got a new one and saved all the fab work?
@DJsHotRodFab
18 күн бұрын
@@Petro5ONE0 yes, but I'm a fan guy and this engine plate is way stronger.
@rajans2985
2 жыл бұрын
What batter do you guys have for the light
@DJsHotRodFab
2 жыл бұрын
Its a Milwaukee 18v. I am running Dewalt 20v on my bikes. You can find both adapters on amazon and Ebay.
@EliJones.
2 ай бұрын
Could I get the link to the torque converter
@DJsHotRodFab
2 ай бұрын
It's just a 30 series driver with a 1" bore instead of a 3/4 shaft like they normally come with
@jimmyrigging101
2 жыл бұрын
Would I be able to do the same build and fit a 40 series torque converter on it?
@DJsHotRodFab
2 жыл бұрын
I don't see why not. It is much larger than the 30 series, so I can't say for sure.
@jimmyrigging101
2 жыл бұрын
@@DJsHotRodFab thanks man, just one more question. Do you think I'll have to shear off the oil dipstick with the 40 series like you had to with the 30 series?
@DJsHotRodFab
2 жыл бұрын
@@jimmyrigging101 you will not have to do that with the 40 series
@masoncoco2558
Жыл бұрын
Where did you get that baseplate I need one for my same build
@DJsHotRodFab
Жыл бұрын
GoPowersports.com
@user-we2cz3hs8j
Жыл бұрын
Did you use the stock clutch
@DJsHotRodFab
Жыл бұрын
No it has a 30 series Torque Converter on it.
@anthonyrivera657
3 жыл бұрын
If anyone can see this what torque converter did you use?
@DJsHotRodFab
3 жыл бұрын
Its a 30 series with a 1" bore driver. You have to cut and fill in the rear oil fill on the side cover to make it fit.
@Yoda_Editz77
2 ай бұрын
Where did you get that engine plate
@DJsHotRodFab
2 ай бұрын
Go power sports
@Yoda_Editz77
2 ай бұрын
Could it be possible if you could swap the 200cc engine in the coleman CT200U moped with the predator 301cc engine
@DJsHotRodFab
2 ай бұрын
@@Yoda_Editz77 that is what we did
@Yoda_Editz77
2 ай бұрын
@@DJsHotRodFab Ohhhh I thought it was a different bike😅
@DJsHotRodFab
2 ай бұрын
@@Yoda_Editz77 oh ya I see what your saying. You can definitely fit in on a ct200
@yusefs6873
3 жыл бұрын
Would a 301 fit in a Coleman 200u
@DJsHotRodFab
3 жыл бұрын
Idk haven't tried
@Deucealive75
3 жыл бұрын
If it fits in the BT it should fit in the 200U.
@abdulkamau2862
2 жыл бұрын
Yes
@bentley4l
2 жыл бұрын
@@Deucealive75 does it fit into the stock bolt holes?
@Deucealive75
2 жыл бұрын
@@bentley4l No. The 301 has a bigger footprint.
@morgankovarik3649
3 жыл бұрын
"Isn't this supposed to be welded" as you look at a part from Go power sports. You pay for that quality.
Пікірлер: 45