Lol, he couldn't wait to hear it. It didn't even put value covers back on
@GrizzlyPaw505
Жыл бұрын
Dude that thing sounds so good…so American
@PontiacSpazz
9 ай бұрын
I’m late but appreciate it
@Mtl_elbey1
2 жыл бұрын
Mannnnn loved it
@PontiacSpazz
2 жыл бұрын
Thanks appreciate it alot 🙏🏾
@slow6six620
Жыл бұрын
Sounds mean af🔥
@PontiacSpazz
Жыл бұрын
This is old setup
@Tazerect
4 ай бұрын
@@PontiacSpazzwhat’s new set up should I go tsp? Or btr
@americantrucker2452
Жыл бұрын
Sweet Jesus 🔥
@PontiacSpazz
Жыл бұрын
Lol it the old motor
@JUNKYARDGTO
3 жыл бұрын
Might need a starter I had a bad one and didn't know it but sounds nasty subscribed
@PontiacSpazz
3 жыл бұрын
Nah I put a new one on lol I think it’s a GTO thing. But I know I need a new alternator. And thanks for the subscribe
@jmartz1969
3 ай бұрын
SICK
@PontiacSpazz
2 ай бұрын
Thank you appreciate it
@falcon_blasphemy
2 жыл бұрын
What mufflers are you running? Just ordered the cam kit.
@PontiacSpazz
2 жыл бұрын
Open headers
@ls2_goat905
3 жыл бұрын
What pushrod length did you go with when ordering the cam I’m trying to get my 06 GTO cammed and I don’t know what pushrod length to go with with the btr stage 4 ls2 cam
@PontiacSpazz
3 жыл бұрын
I’ll have to check but u should probably do some measuring because this is a big cam and u might run into some clearance issues
@PontiacSpazz
3 жыл бұрын
7.400
@ls2_goat905
3 жыл бұрын
@@PontiacSpazz alright thanks man
@PontiacSpazz
3 жыл бұрын
@@ls2_goat905 no problem
@ls2_goat905
3 жыл бұрын
@@PontiacSpazz wait did you only do cam and then everything else stock or did u upgrade lifters and heads?
@vegito1087
Жыл бұрын
I want one so bad 😍
@PontiacSpazz
9 ай бұрын
Get one 🤭🫣😈
@vegito1087
9 ай бұрын
@@PontiacSpazz tryin 😩
@gregoryjowers3629
Жыл бұрын
Dang that boy is chopping wood
@PontiacSpazz
Жыл бұрын
Appreciate it
@coreyr6094
2 жыл бұрын
The engine bay computer that’s mounted on the right strut tower. Is that the factory one relocated or is it aftermarket?? Sounds bloody awesome btw. Love it
@dylangalvin98
2 жыл бұрын
Factory location
@coreyr6094
2 жыл бұрын
Thanks. What is it btw, is that the ecu?
@PontiacSpazz
2 жыл бұрын
Thanks and it’s the factory. Ppl relocate it inside the car to under the glove box or under the driver side foot panel. I haven’t decided where to run it. I’ll be going Holley ecu soon so I don’t think I’ll be thinking to hard on it
@PontiacSpazz
2 жыл бұрын
@@coreyr6094 yes that’s the ecu
@coreyr6094
2 жыл бұрын
@@PontiacSpazz Honestly I think it looks really cool man. Thanks for the replies also :)
@ghtrcp7554
2 жыл бұрын
How is the low end, daily driving in traffic?
@PontiacSpazz
2 жыл бұрын
Never really drove it in traffic. And I wouldn’t want to misinform u because I had a heavy clutch. But coming off a stop light with my heavy clutch once I got used to it…it wasn’t a rodeo session if that’s what ur asking. But having a manual or auto u definitely would see a difference depending on ur setup (clutch/converter)
@klyvrt5100
2 жыл бұрын
Hey was wondering what the valve lift and duration specs were on that cam?
Appreciated. Installed a similar BTR cam to yours and finally got the first start up today. Just wanted to compare to get an estimate for power
@PontiacSpazz
2 жыл бұрын
@@klyvrt5100 no problem
@Georgeyboy1987
Жыл бұрын
Is it drivable or is it a pig on the low rpm side
@PontiacSpazz
9 ай бұрын
I know it’s a late reply but it was driveable. I think it’s all about ur clutch, ur left foot and tune.
@terrellslocum8256
Ай бұрын
Anyone else notice the valve covers were off?
@drewfrohriep683
3 жыл бұрын
got a 6.0 goat i bought in may of this year spun a bearing second day i had it any advice
@PontiacSpazz
3 жыл бұрын
Damn that sucks. But take it out pull it apart and see how bad it really is. If the block is savable just do a rebuild. Depending on how crazy u want to get build it or just replace it with stock parts and arp head studs, arp main studs, and get a upgraded “improve racing” oil pan baffle. Helps with the oil staying at the pick up tube instead of going to the back of the oil pan which starves ur motor of oil on accelerating really hard. It’s just up to u on how far u want to go
@trevorbonds1791
3 жыл бұрын
Just dig into it. If you can build the advanced lego sets for kids then you can build an LS engine lol.
@Loucfr
Жыл бұрын
You got some cojones on you to run that car without valve covers lol Id be shitting brinks but it looks so cool though nice job man
@PontiacSpazz
9 ай бұрын
I was just checking the oil making sure it was flowing correctly
@urbancydeperformance1831
2 ай бұрын
What is the cam specs like lift and lob separation?
@PontiacSpazz
Ай бұрын
It’s in the comment section another person asked
@emersonurbina8042
Жыл бұрын
Can I ask what pushrods and valve springs you used
@PontiacSpazz
Жыл бұрын
BTR bee hive springs and pushrods
@emersonurbina8042
Жыл бұрын
@@PontiacSpazz ah did you get a kit I just bought the kit seemed easier
@PontiacSpazz
9 ай бұрын
I’m late answering but I did this motor had BTR products
@aydenrfb6626
Жыл бұрын
Did you need aftermarket rockers or pushrods
@PontiacSpazz
Жыл бұрын
Yes
@aydenrfb6626
Жыл бұрын
@@PontiacSpazz can you send me the links bro thank you
@PontiacSpazz
Жыл бұрын
@@aydenrfb6626 I can’t remember but it’s Brian Tooley kits. I told somebody else in the comments the length and everything check the comments
@bradlywright5189
2 жыл бұрын
I'd love to know what numbers it made on the dyno
@PontiacSpazz
2 жыл бұрын
i made 425/405....should be close to 450 but im guessing it was the dyno mixed with shitty tuning
@bradlywright5189
2 жыл бұрын
Is that a N/A cam or boost cam?
@PontiacSpazz
2 жыл бұрын
@@bradlywright5189 na
@bradlywright5189
2 жыл бұрын
@@PontiacSpazz with a cam like that I'd expect more around the 500 wheel mark, only cause that's roughly what we make with just a heads & cam kit here in Australia with our 6-6.2ltr LS's on ron 98 fuel. Providing the pistons have been fly cut for valve clearance.
@PontiacSpazz
2 жыл бұрын
@@bradlywright5189 just seeing this but that what I thought. The tune one it blew it up on the way home when I picked it up from the tuners so I’m sure I was supposed to be high 480-90whp with the correct tune. It was on flex fuel so they claimed. Think I only got a pump gas pull and then a e85 pull and then they just made sure it idled correctly because car didn’t gain no more than 24 whp from pump gas to e85 even with injectors and a fuel pump. I’m sure if I took it to e reputable tuner I would have been better off.
@Candyvyorn_
3 жыл бұрын
How has the reliability been for you
@PontiacSpazz
3 жыл бұрын
Reliability in what
@Candyvyorn_
3 жыл бұрын
@@PontiacSpazz the engine. Has there been any head or top end issues
@PontiacSpazz
3 жыл бұрын
@@Candyvyorn_ this motor met the big man above. Tuner blew it up with his shitty ass lean leap frog tune
@AmatuerHourCoding
3 жыл бұрын
@@PontiacSpazz RIP man, sorry to hear that
@PontiacSpazz
3 жыл бұрын
@@AmatuerHourCoding it’s all good new motor getting out together right now. Got a couple weeks left
@davidb5299
8 ай бұрын
How bad is drone with open headers?
@PontiacSpazz
8 ай бұрын
U get used to it. At cruise it’s not bad if u have a good radio. At stop lights and signs definitely can’t wait til it turns green cause the floor board gets hot
@davidb5299
8 ай бұрын
@@PontiacSpazz oh shit, well did cam make a huge power difference does it feel a lot faster? And does it shake bad
@davidb5299
8 ай бұрын
@@PontiacSpazz was wondering do you need a stall converter to swap this cam it for the trans?
@davidb5299
8 ай бұрын
@@PontiacSpazz did you install the cam yourself?
@davidb5299
Жыл бұрын
How much it cost to install just the cam?
@PontiacSpazz
Жыл бұрын
Idk cam was put in with a rebuilt motor
@davidb5299
Жыл бұрын
@@PontiacSpazz how much did rebuilt motor cost
@PontiacSpazz
9 ай бұрын
I’m late on answering but it ran me $3,000 and some change for labor and some of the parts they bought I bought the pistons and cam
@PontiacSpazz
9 ай бұрын
So I would say out the door 4.500 no more than that with parts and labor
@princenxrdie6621
Ай бұрын
(+1000 aura) on startup
@roadworkahead6368
3 жыл бұрын
Why are the valve covers off lol
@PontiacSpazz
3 жыл бұрын
To make sure that my springs are getting oil
@roadworkahead6368
3 жыл бұрын
@@PontiacSpazz lmao what a weird way to do that. LS heads flow 2.5QTS of oil almost. You deff had oil up there.
@PontiacSpazz
3 жыл бұрын
@@roadworkahead6368 dude. It’s call making sure. What u call weird is what other ppl call regular. If u have ur ways I have my ways simple as that
@roadworkahead6368
3 жыл бұрын
@@PontiacSpazz trust me. If your springs weren’t getting oil you’d know it. Not only that but you need to be more worried about the lifters, rockers, and bottom end. Your springs are fine lol.
@PontiacSpazz
3 жыл бұрын
@@roadworkahead6368 if my springs weren’t getting oil it would mean it’s not picking up oil hence why I took the covers off. Obviously like I said I was making sure all my lifters and push rods were doing what there supposed to be doing. U DO UR WAY ILL DO MINE. Idk y it’s so hard for y’all to get😭 UR WAY IS URS AND MINES IS MINES THATS THAT KEEP IT MOVING
@chocolatemilk9102
Жыл бұрын
why is it smoking ?
@PontiacSpazz
Жыл бұрын
Because it’s a brand new motor
@chocolatemilk9102
Жыл бұрын
@@PontiacSpazz you mean because it’s a piece of shit?
@jaewhite2462
2 жыл бұрын
Nice sounding cam, horrible sounding exhaust. Sounds like a kid got his hands on momma's mustang.
@swappedoutZ71
2 жыл бұрын
It's open headers genius
@PontiacSpazz
2 жыл бұрын
@@swappedoutZ71 Lmfaoooo thank you imagine saying “nice sounding cam” and “horrible sounding exhaust” in the same sentence 😭😭😭 If I knew where he lived I’d blow his ear drums smooth tf out
Пікірлер: 106