I understand that tha customer wants what tha customer wants.. but I’m personally not a fan of high lockup anything on a lowrider.. great video bro..
@benchavez9837
7 ай бұрын
good video yea those high lock up ball joints mostly for looks just my opinion, I used 1990 lincoln uppers on my 2000 1 inch extended n reinforced kept all it all lincoln. keep up the great videos
@Adam_StillRollin_Gutierrez
7 ай бұрын
I'm a Lincoln guy. I have owned a few.... I love the high lock up but this is crazy! I love my life to much to put my life at risk like that. Awesome work.
@cadillaccrysto
5 ай бұрын
and would ya look at all that positive feedback!!! That's real builder status if ya ask me 😉
@michaelvillarreal6574
7 ай бұрын
just put 90’s Lincoln spindles conversion.plus you’re going to chain it so you put the stopping point. I wouldn’t grind off the uniball lip
@thecadillacdanshow8658
7 ай бұрын
That's what I ended up doing
@richpianaproject4862
7 ай бұрын
Good video brother. Keep it up! 💪
@low-life-luke7332
7 ай бұрын
Get a lot of tips from you and I'm rebuilding a 99 turtle right now so these videos are perfect!!
@cadillaccrysto
5 ай бұрын
#realbuildersmatter
@carguysnewengland
7 ай бұрын
What about Donk lift spindles ?
@thecadillacdanshow8658
7 ай бұрын
Could definitely be a option
@MichaelLent-f7t
7 ай бұрын
I heard you mention Black Magic. Are those the BM high lockup ball joints or did they come from somewhere else?
@thecadillacdanshow8658
7 ай бұрын
They are not black magic ball joints I dont remember the maker
@andrewvilla7987
7 ай бұрын
I’m trying to build a 93 grand marquis so a Lincoln video would be awesome love your videos and work keep it up
@thecadillacdanshow8658
7 ай бұрын
They are the same platform so alot of the videos will relate to your car as well
@bravobeats7983
7 ай бұрын
💙💙💙💙
@Junk_yard_jason
7 ай бұрын
Dan your Awsome thanks for the good info
@thecadillacdanshow8658
7 ай бұрын
Thanks for watching!
@chicanomexicanoamericano3652
7 ай бұрын
That is sick
@78ttop
7 ай бұрын
I’ve heard of those ball joints breaking but I never ran them.. I’m having my arms built with uniballs built into them and I’ll have to drill my spindle out for a 3/4 bolt
@matthewsalcido3
7 ай бұрын
Where did you get the 3/4 uniballs from?
@thecadillacdanshow8658
7 ай бұрын
@matthew1986ful not sure the customer supplied them
@thecadillacdanshow8658
7 ай бұрын
That seems to be the better route you can angle the uniball so I dosent bind then weld it in
@CadillacToothdeville
6 ай бұрын
You have to replace them with grade 10 CAT bolts or they 100% will break.
@Projectjoe510
7 ай бұрын
What spring size you put in there
@thecadillacdanshow8658
7 ай бұрын
They were supplied by the customer but I believe they are 3 1/2 ton
@cadillaccrysto
7 ай бұрын
💘
@Rios_Hydros
7 ай бұрын
Some have even used 90s aerostar spindles also
@thecadillacdanshow8658
7 ай бұрын
I have heard of people using the ball joints the look the same as linclon ball joints but measure different but I have not heard of using the spindle I may have to look into that
@soulessm8015
7 ай бұрын
@@thecadillacdanshow8658 question do you have to pull engine to wrap the belly? Or can you do just front bottom and back and leave engine mounts alone 2001 Lincoln town car? Thanks
Пікірлер: 36