All my links in one place: direct.me/strhandmade Find my leather crafts & PDF templates: www.strhandmade.com/ www.etsy.com/shop/strhandmade All my PDF templates in one: www.strhandmade.com/product-page/bunch-of-all-pdf-templates-by-str-handmade
@GabrielGosselin
3 жыл бұрын
I respect a man that has an accent as thick as his beard.
@strhandmade
3 жыл бұрын
:D Thanks, man!🐗
@ThisIsChrisWebb
3 жыл бұрын
Absolutely love how genuine you are. Both of those other presses are super expensive for most of us too. You’re extremely humble and transparent, I think majority of us gravitate towards you for that reason.
@strhandmade
3 жыл бұрын
Thanks! Trying to produce content, i would like to watch when i started leather crafting.
@sebastianross1050
5 ай бұрын
This guy is authentic....
@mtlgrlie
3 жыл бұрын
Great information that i’ve been curious about for a while. thank you SO much for helping us newer leather workers out. 👍👍🙏
@strhandmade
3 жыл бұрын
My pleasure!🐗
@Madein515
3 жыл бұрын
Awesome stuff! I got my half ton arbor press at Harbor Freight for around $40us with a coupon. It's not super high quality but it has worked for everything I've needed it to. I used it to stamp leather but didn't realize all the potential. Now I just need to get some dies made. Thanks for making this vid. Can't wait to see more! 👍👍
@strhandmade
3 жыл бұрын
Glad to help!🐗
@LaPatronaVlogs
3 жыл бұрын
Ohhhh thank you now I’ll be going to my harbor freight for one
@TJHutchExotics
2 жыл бұрын
Where can you find dies?
@murraykopp7464
3 жыл бұрын
I have a 10 ton hand pump bearing press that I have been just needing to order the dies for. First got it for mechanical work, then have used it for when I have been steaming and bending wood as a clamping force, now for leather. cost me $300 CDN...usually more than one way to skin a cat:) thanks for showing what you are finding that is cost effective and still gets the job done...love it
@LaPatronaVlogs
3 жыл бұрын
Honestly for a women this is exactly what I need . Thank you 🙏
@larrycumba2741
4 ай бұрын
Love my 3 ton arbor press. On a large die that is inserted in a wood frame you will need a top plate as in the video.
@zakwinter7376
3 жыл бұрын
STR is an absolute hero! been struggling to find where to get custom dies from for ages and wasnt expecting that little added bonus to this video! always gives good advice, tips, tricks and information! thank you, and always continue to do what you do!
@strhandmade
3 жыл бұрын
Glad it was helpful🐗
@the-nomad
3 жыл бұрын
Thanks for this (and hi from a neighbour, I'm living in Latvia, near the border), just found a press for sale in Czech Republic, so will get it ordered next week and reboot my leatherworking.
@benjismith593
3 жыл бұрын
Thank you for this! Another press is a bearing press. Can get for around $150 at Harbor Freight.
@rudyvillafana1925
3 жыл бұрын
1ton abor press at harbor Freight las Vegas NV On sale For $58.00.
@elmokvalygar8503
3 жыл бұрын
bought this a year ago, this item is must. I even drilled a hole to fit any prickin iron in case i need not to make any noise
@strhandmade
3 жыл бұрын
cool, its one more way to use it in workshop ;)
@thatHARVguy
3 жыл бұрын
I saw someone modify their 1 tonne to add a drill adaptor. That way they can attach pricking iron, punch, logo stamp or whatever tool for repeated tasks.
@elmokvalygar8503
3 жыл бұрын
@@thatHARVguy same uses for me too, its a must that press, especially if you anot "allowed" to make noise cause you work your hobby at home ;)
@PINACI
3 жыл бұрын
I use a half ton arbor press and stick a heavy duty steal pipe over the lever to give me more leverage power.
@oakridgereview1359
3 жыл бұрын
Been using my #0 1.5T arbor for a few months to do sleeves and key chains. I love it!
@strhandmade
3 жыл бұрын
No doubt, very useful tool
@walkersworkshop
3 жыл бұрын
Good timing, just bought one of these yesterday
@strhandmade
3 жыл бұрын
Nice!🐗
@Annalorraine67
2 жыл бұрын
OMG I’m so glad I found you thank you for this piece of
@shanedodd3630
Жыл бұрын
Thank you for the videos this will save me a lot of money
@MuseLeathercraft
3 жыл бұрын
Thomas, thanks again for an excellent video! Your video production quality is awesome! Thanks 🙏 Gordy
@strhandmade
3 жыл бұрын
Thank you too!🐗
@АндрейСерый-д9я
10 ай бұрын
я такие штанцевальные формы изготавливаю с перфорацией под шнуровку.
@РустемАбдуллин-р1ф
3 жыл бұрын
Привет! Рад видеть тебя и твой ролик! Хочу пожелать тебе еще больше заказов, ведь когда много работы это так здорово!!
@strhandmade
3 жыл бұрын
Спасибо!🐗
@chicagonews1878
3 жыл бұрын
Love your wallets !!!
@seandepoppe6716
3 жыл бұрын
Thank you! Just found your channel this morning subbed &👍😎👍
@strhandmade
3 жыл бұрын
Welcome aboard!🐗
@yohana_etlaf
2 жыл бұрын
Excelente video, muy explicativo, se agradece los subtítulos en español. Saludos desde chile
@nikolays4148
3 жыл бұрын
По русски такая вырубная форма называется "штанц-форма". В крупных городах несложно найти компанию которая изготовит ее по вашему чертежу. В интернете найти изготовителя еще проще. Реечный пресс тоже не является большой редкостью. Но для вырубки я бы выбрал пресс с большим усилием, на 1,5-3 тонны. Вырубать лучше на плите из LDPE - полиэтилена высокого давления: этот материал позволит оставаться ножам штанц-формы острыми долгое время. Некоторые разделочные доски делают из LDPE.
@PatrickPease
Жыл бұрын
Inches are metric, 10 inches is 24 cm because the inch is defined in cm.
@strhandmade
Жыл бұрын
Inch is imperial system unit, not metric. And 1 inch = 2.54cm
@Andrew-wb9kg
3 жыл бұрын
hey mate, thanks for the tips, I am picking an arbor press now and was balancing between 05 and 1T press, now I know which one to choose. Realized I saw your awesome works on instagram after I saw your logo. Good luck.
@bluejeans8001
Жыл бұрын
Thanks for sharing 👍🇺🇸
@1-0totheOrient
3 жыл бұрын
An inspirational video, thanks. I recommend Atlas Dies Ltd. They supply these types of dies for leather cutting. They’re based near Romford, east of London. I’ve bought the dies and they’re top quality British made. Just need an arbor press now, a one tonne press not a half tonne press! Although, Atlas have their own clicker press and would do the cutting.
@strhandmade
3 жыл бұрын
I have no doubt in every country you can find local companies which makes these dies, i already found here in Lithuania :) (wasnt so easy :) )
@rudyvillafana1925
3 жыл бұрын
What the address for Atlas Dies Ltd
@egidijussiusis4801
Жыл бұрын
@@strhandmade labas Tomai. Gal gali pasidalinti informacija kur Lietuvoje gamina tokius peilius?
@strhandmade
Жыл бұрын
UAB Baltstancas
@martinuzunov9346
3 жыл бұрын
Beautiful info. Thanks, man! Can you talk a little about how you come up with your wallet designs. Do you have a starting point or base measurements you always take into consideration like credit cards, etc?
@strhandmade
3 жыл бұрын
Good topic, will make something about that in future🐗
@marcd6228
3 жыл бұрын
Good job with your channel BTW. You provide great inspiration and information for other leather crafter. I suggest to everyone to support this channel with monthly joining. It"s important to support independent creators who takes time to provide great content!
@strhandmade
3 жыл бұрын
Thank you! I really appreciate your support and encouragement to do others!🐗
@chrisparsley511
3 жыл бұрын
Good ideas, keep up the good work.
@strhandmade
3 жыл бұрын
Thanks, will do!🐗
@rakso383
3 жыл бұрын
я такой же приобрёл,PROMA AP-1,у него в штоке есть отверстие на 10мм, сделаю втулку можно будет ставить фурнитуру(хольнитены, люверсы и т.д),брал т.к не хочу стучать молотком, соседи будут ругаться ,а с прессом много можно делать
@lexxsladkov5580
Жыл бұрын
И как? у тебя получается вырубать кожу? У меня какие-то неимоверные силы нужно прикладывать, чтобы вырубить
@joliski
3 жыл бұрын
Very good and useful information. Thank You.
@strhandmade
3 жыл бұрын
Glad it was helpful!🐗
@marcd6228
3 жыл бұрын
Good job Again my friend! I also bought an arbor press 1 ton a couple of months ago on amazon.ca and it it pretty useful for logo marking! A good trick is to use a small magnet to keep the brass logo in place and have your hands free.I gained in precision with that trick.I haven't bought any die cast yet but I will sure begin with that same press before buying an expensive press!
@strhandmade
3 жыл бұрын
I have another way to make stamping precisely. Will show in another video.
@marcd6228
3 жыл бұрын
@@strhandmade great! I also saw that you sometimes heat the brass logo before. Does it makes a good difference? Do you do it only for some types of leather? Thank you!
@strhandmade
3 жыл бұрын
@@marcd6228 Yes, i always pre-heat before stamping, it makes more contrast on leather
@marcd6228
3 жыл бұрын
@@strhandmade i will definitely try!! Thank you
@albertoarnaizt.9746
3 жыл бұрын
Felicidades por el vídeo, es una gran ayuda este tipo de información. Yo ahora estoy pensando en comprar uno.
@6thMinute
3 жыл бұрын
Just want to comment how this helps us saving money!! 😍🤩💖 Thank you for the tip! Subbed and liked!! Looking for more content from your channel!
@strhandmade
3 жыл бұрын
So glad!🐗
@roseleathercraftsph
3 жыл бұрын
I bought a clicker press via aliexpress too it's pretty affordable
@strhandmade
3 жыл бұрын
By my research its best choice according to price
@roseleathercraftsph
3 жыл бұрын
@@strhandmade I bought something similar to this tinyurl.com/y3slf42f it's around $148 but you can still find bigger clicker presses similar to this. I love it. And it has a bigger area for pressing too. The flat surface is a big help. But I live the idea of using an arbor press too - saves money and space.
@irapelletier5506
3 жыл бұрын
I always wondered where to get the cutting dies made, thanks!
@ahmedelkeshk4384
3 жыл бұрын
Thanks for your info. You share with us ❤️💐
@strhandmade
3 жыл бұрын
My pleasure🐗
@fyyfu
Жыл бұрын
Fantastic content, thanks for sharing your ideas! Sending some love from across the lake, Sweden :)
@danielirvine7468
3 жыл бұрын
Try getting a longer arm for you're press should give you more power
@adham_z1463
3 жыл бұрын
Wow
@KateMondor
3 жыл бұрын
Very interesting. Thanks 👍🏻
@strhandmade
3 жыл бұрын
My pleasure!🐗
@aaronacj
3 жыл бұрын
Great vids
@catd281175
3 жыл бұрын
Thanks for the info!!!
@filipbanh
3 жыл бұрын
Great video, I've been looking at one for weeks now. For about 100 euros I can get a 1T press delivered from Amazon.de here in Europe. I was also thinking of using it to stamp my maker's mark, perhaps set some rivets and if I decide to go that route, use it to cut with smaller clicker dies. I'm glad yours suits You well and that even with smaller pressing force of 0.5T it works well for you.
@strhandmade
3 жыл бұрын
I believe 1T slightly bigger. But when i bought it, it was for stamping and it was more than enough ;)
@mavisinchap
3 жыл бұрын
Hello! Can you share the press's shopping link? Thank you.
@AndrewMurphy8383
3 жыл бұрын
in the usa try looking at hobbor freight for armor press
@violetviolet888
2 жыл бұрын
It is "Arbor Press"
@westboundpony
3 жыл бұрын
Got my 1 ton arbor press at Aliexpress for $60 all included. They had it in a US warehouse and it was delivered in 4 days. I agree, it is an awesome tool to have.
@strhandmade
3 жыл бұрын
Main issue with this device is delivery, when its possible to get from local warehouse its very nice :)
@westboundpony
3 жыл бұрын
@@strhandmade On that note, I wanted to let you know that there are a couple of Aliexpress vendors selling dies of your card wallet (the single one with wrapped top leather). Their pictures show your logo. Let me know if you want me to send the link to you.
@strhandmade
3 жыл бұрын
Yes i saw it, tried to report, unfortunately not much can do about that :(
@megacanam
8 ай бұрын
@@strhandmadecopying is the highest form of flattery! Just keep innovating and designing new stuff… we will keep buying it!
@mantaszminskis5619
2 жыл бұрын
I have dake three ton press. Is good press.
@dreamwarriors979
3 жыл бұрын
4 Ton is optimal!!!
@strhandmade
3 жыл бұрын
Sure, more is better, but 0.5t also does the job well.
@violetviolet888
2 жыл бұрын
Danjo Nagual Crew: Are you gifting one to Tomas?
@lioati
3 жыл бұрын
I like the idea, I also tend to look for alternatives such as this one, also then video is very well done, you just got a new subscriber here, but I'm not sure I would go with this over investing in a formal hand operated clicker press.
@strhandmade
3 жыл бұрын
For sure formal clicker press is better if you have option for that :)
@lioati
3 жыл бұрын
@@strhandmade Indeed. If I ever get an arbor press I'm totally trying this. I'm currently cutting by hand and I don't have an arbor press or a clicker press, so I think I will eventually try to get one of the two
@triplecoutdoor7495
2 жыл бұрын
where can I have my dies punch plate made?
@radengilang2773
3 жыл бұрын
Thx u.. so helpful
@strhandmade
3 жыл бұрын
Glad it helped🐗
@danielirvine7468
3 жыл бұрын
I can't find the AliExpress link where you get you're dies made do toy have it still
@abzalacom
3 жыл бұрын
Probably everyone goes this way of finding an inexpensive press. As well as finding the corner punch.
@ДенисЕвменов-ь6и
3 жыл бұрын
Слушая данного мастера и его акцент кажется что он свой)) А он русский? XD Ладно если серьезно. то крутой мастер, отличные идеи, хорошие проекты, так держать. Привет с Сибири
@acorvus3459
3 жыл бұрын
Латыш он, придет и русский знать должен))
@strhandmade
3 жыл бұрын
Спасибо! Нет я не руский. Я литовец, но на русском говорю и понемаю с детства довольно хорошо. Писать кириллицей не умею, но для этого Google translate помогает. С английским у меня всегда было не очень, но стараюсь :)
@lexxsladkov5580
Жыл бұрын
Я может что-то не так делаю? Купил такой же на 1 тонну, но чтобы вырубить нужно столько усилий приложить, капец короче))
@strhandmade
Жыл бұрын
если вырубать большие детали, лучше всего работает если начать с кагого то угла и направить всё давление туда, и так обаити вогруг. если деталь небольшая, карманчик например, токда всё работеет обычно
@russellcrase1983
3 жыл бұрын
👍 good info
@strhandmade
3 жыл бұрын
Glad it was helpful!🐗
@Afaf-nz5cu
2 жыл бұрын
I did all the steps of the pressure machine and it didn't cut the leather ☹️ my dreams faded
@1arpa
2 ай бұрын
Would 0.5 tons be sufficient for leather work? The product sold in my country is only 0.5 tons
@strhandmade
2 ай бұрын
I think for leather up to 2mm thickness should be ok
@1arpa
2 ай бұрын
@@strhandmade Is the Arbor Press you use 1 ton?
@johnmaguire2613
3 жыл бұрын
I cannot find the link to the makers of the cutting dies.
@strhandmade
3 жыл бұрын
Check video description, you will find :)
@mavisinchap
3 жыл бұрын
Hello! Thanks a lot for sharing the information! How did you get in touch with the seller on Aliexpress about designing and producing custom cutting dies? Stay healthy!
@strhandmade
3 жыл бұрын
Hey, drop private message to seller
@bruhreis
3 жыл бұрын
hello I'm from Brazil. I don't speak your language, unfortunately. Could you tell me the number of this press? congratulations on the video and thanks for the great content.
@strhandmade
3 жыл бұрын
What do you mean number? Its 0.5 ton
@ralphblack
11 ай бұрын
Man, i just came across this video. Today i bought a hydraulic bearing press for my leather crafts. Unfortunately, i couldn't find the arbor press to start with. The bearing press is a little slower but much stronger.
@strhandmade
11 ай бұрын
Arbor press option is the best for small/beginner workshops, it doest cost much and do not need much space. Force to punch is quite enough, unless you punching 4mm leather :)
@doxatec9
3 жыл бұрын
Where did You buy dies for cutting leather?
@strhandmade
3 жыл бұрын
Check link in video description
@ricardoquiterio741
3 жыл бұрын
wOW. Amazing explanation and good information. Could you tell me if this 0.5 ton press is capable to cut 2.5 mm leather? Thanks man.
@strhandmade
3 жыл бұрын
Its more depends on die size, im usually working with 1.4-2mm leather have no problem.
@ricardoquiterio741
3 жыл бұрын
@@strhandmade Thank you.
@ToshaViktorovich
3 жыл бұрын
Эх, я бы себе такой пресс взял, но нет лишних 120$ на него.
@povilaszickus9847
2 жыл бұрын
Gera matyt dar viena lietuvį dirbantį su oda😀
@ИльяМозуль-й8к
3 жыл бұрын
Кепка вроде не ровно надета
@strhandmade
3 жыл бұрын
Надо будет переснять видео :)
@xqz666
3 жыл бұрын
В литву ? А я понять не могу дружище, почему у тебя такой русский акцент(как у мутко спик фром май хар). Крутой контент , я тоже начинающий.
@strhandmade
3 жыл бұрын
с Русским у меня на много луче с детства могу говорить , акцент на много меньше :) на английском можно сказать начел говорит только тогда, как начел делать эти видео, так восточно европейский акцент на всю катушку :D на вряд ли когда не будь его получится избавиться :)
@xqz666
3 жыл бұрын
@@strhandmade это изюминка, выдает своего человека за рубежом, хоть я там никогда и не был). Привет из россии.
@3e1eboba
3 жыл бұрын
Привет! Ты русский?) Я подписался))
@INN80
3 жыл бұрын
Латыш,русского не знает
@strhandmade
3 жыл бұрын
нет, Литовец я🇱🇹 :)
@chicagonews1878
3 жыл бұрын
Weaver hand press is just overpriced it’s ridiculous everything they sell is beyond its value !!
@strhandmade
3 жыл бұрын
Probably its more for businesses not for hobbyists, but you always can go with more affordable alternatives :)
@Craftpari
Жыл бұрын
😊👍
@GaryMarsh2
10 ай бұрын
Great idea to use the arbor press. I have a few projects requiring multiple cuts, which will work perfectly for my small shop. Also, I just realized I've bought some of your patterns from Etsy. Nice work my friend.
@Native_love
3 жыл бұрын
You good sir are turning into my favorite KZitemr!
@strhandmade
3 жыл бұрын
Glad to hear it!🐗
@acorvus3459
3 жыл бұрын
A-format russia press
@acorvus3459
3 жыл бұрын
Company have good press and punches
@prawdydawca13
3 жыл бұрын
@@acorvus3459 do you have any link? I can't find it on the web
Пікірлер: 151