HI, well presented video with useful added modification list. bye
@harbaughsworkshop
11 ай бұрын
Thanks
@ttcnc3755
10 ай бұрын
You mentioned a water pan you bought on amazon for like $139 fo you have a link to it
@davidnipp3623
24 күн бұрын
How big of air compressor are you using for your cnc? What pressure are you using as well? Thanks, great build. Gonna start on mine soon. Have the plans collecting parts.
@oldbuddyben
2 ай бұрын
Does the cut55DS Pro also have the ability to be controlled for CNC use? that feature is eluding me in the specs listed on the web site. Cool video. definitely something I'd look into building someday.
@danialhowe9814
10 ай бұрын
could you explain ( or better yet demonstrate ) what you did to use BLUETOOTH? i love that idea!
@bobbyz7736
Жыл бұрын
That was a great video. Thanks for making it and also for sharing your files to print out the parts that you customized for the build. Im just about finished collecting all the materials. Im having trouble finding the 2-1/2 .120 square tube . Im in Lake Havasu City, Az and there is limited material availability without buying full sticks of steel.
@ziggycoussement
Жыл бұрын
Id recommend looking for a local fab shop and ask them if they would be willing to sell you some if they have it. At my shop, we had that happen before and we were more than willing to sell them the exact length they needed. It probably won't be that expensive even compared to a local steel supplier
@rp3989
3 ай бұрын
Any0ne having trouble flashing there Arduino?
@Blou55
Жыл бұрын
Cool, i have the same issue like you had. I was looking for a solution for the railing and you it is exactly what i will do. Could you, if you want, make a comment including the stl file for the bearing holder, so i will not have to design it. Thanks, you make my day 😅
@JMan377
Ай бұрын
Where do you get the electronic components to run the arms and software?
@digitizer101
10 ай бұрын
I like the additional support to hold up the arm. I think I will add that as well but need some way for it to fold out of the way as I add all the material to be cut from that end.
@CrisHarrison
10 ай бұрын
You can stop the sagging by adding a post on bering end then run run a cable to the other end near the torch. Use a turn buckle to tighten the cabe.
@ไพรวัลย์ยอดสุทธิ-ฃ5ด
Жыл бұрын
❤ขอบคุณสิ่งที่น่ารู้อาจารย์
@milesmccoo
6 ай бұрын
you're using the ct2050 on the table but you also have a CUT-65DS. Does this mean the CUT-65DS is no suitable, at least for thinner and lower duty cycle cuts? CUT-65DS is a lot cheaper.
@codyolsen2326
11 ай бұрын
What do you use for software for designing stuff to cut out ?
@harbaughsworkshop
11 ай бұрын
I use inkscape and fusion 360
@zacharytuttle5618
10 ай бұрын
Inkscape for art, any 2d cad of your choice for dimensional stuff. I use solidedge 2d
@harbaughsworkshop
10 ай бұрын
@zacharytuttle5618 I have been using fusion360, I have never used solid edge 2d. I will check it out. Thanks.
@saith007
Жыл бұрын
Hi bro veza milje ga
@konstantinmakarevic6125
5 ай бұрын
Hi, how does your y axis work? I have some kind of resonance, I can’t understand what the problem is.
@jeffhayes_Gent_Be
9 ай бұрын
hi, I love my Yes Welder combo machine and I would like to use its plasma cutting option to make this CNC cutter .. you are using the CUT-65DS .. will the CT2050 work in this application?
@williamdalzell4085
Жыл бұрын
well done loved it
@rp3989
2 ай бұрын
can you show the Bluetooth setup? I would find that very useful
@catfish1969
8 ай бұрын
I enjoyed the video, impressive work! Would anyone happen to know what Ender 3D printer he is using?
@hossfarran6327
8 ай бұрын
Would you be interested to build one and sell it to me? Not sure where you are located I'm in texas. Maybe assemble all of the top parts. And I can assemble build the table foot frames are those would be the heaviest to ship
@agguilarmetalwork4494
Жыл бұрын
Hi is the z axis touch off part of the design ?
@harbaughsworkshop
11 ай бұрын
Yes it comes with the plans
@thestickflicker
4 ай бұрын
on you video you mention that you got the water tub on amazon, can you give a link to which one you got?
@frederickwilliams9892
8 ай бұрын
I loved this project. I'm going to build me one. Can you make them longer?
@steelworkers78
Жыл бұрын
May you give me the basic program to build machine like that brother?
@brpwmachinestools8594
8 ай бұрын
good job, I'm looking for some inspiration. as I first spot this on JD’s Garage chanel, I was wondering why he did not make second gantry on the oposite side. it is not good to leave the end unsupported, just floating. and my 1st question is. is this diy copy of Langmuir's Crossfire or vice versa?
@denslod2930
6 ай бұрын
Crossfire doesn’t make them, they buy them from a company in China, Hawui or something like that. The sag is not the aluminum, check the weight per foot. It’s Your printed parts and adjustments. Last, when your not using the cutter, brace the end. Plastic can sag.
@frankrey7676
6 ай бұрын
How much did you end up spending?
@chrissantos7865
11 ай бұрын
What is the red light on your 3d printer?
@harbaughsworkshop
11 ай бұрын
BL touch for leveling the bed
@chrissantos7865
11 ай бұрын
@@harbaughsworkshop thank you
@agguilarmetalwork4494
Жыл бұрын
Hi than si for the great video, one question in the plans in the electronics includes the THC ?
@harbaughsworkshop
Жыл бұрын
They have not released the THC yet. I do know they are working on it now and trying to perfect it before releasing it to their subscribers. I do not know if this will be part of the original plans or not. Only they can answer that. I have every plan on updating this machine once they release it. Keep an eye out on my channel. I will do an update when it's released
@agguilarmetalwork4494
Жыл бұрын
@@harbaughsworkshop thanks!
@agguilarmetalwork4494
Жыл бұрын
Hi do you have a link for your 3D files ?
@harbaughsworkshop
Жыл бұрын
@@agguilarmetalwork4494 The 3d files I created or upgraded are in the description
@agguilarmetalwork4494
Жыл бұрын
@@harbaughsworkshop thanks👍🏻
@richardswartz4273
Жыл бұрын
I bought the high frequency non pilot arc one for building this table around 5 months ago. I think I screwed up there. I notice now there is a non high frequency option. I can get it all to work until the plasma arcs and then it shuts everything down!
@harbaughsworkshop
Жыл бұрын
With the plasma cutter, make sure it is Non-High frequency or “blowback” and make sure it is CNC compatible or can actually be converted to work with a CNC. HF will mess with your electronics
@rgrg3683
7 ай бұрын
awesome work💯👍
@stevestadinko6045
Жыл бұрын
What is the thickest steel this will cut?
@harbaughsworkshop
Жыл бұрын
The dimensions are 30"x 28". The thickness of the material depends on your plasma cutter. The YesWelder CT2050 clean cut over an inch thick
@scottydntno
Жыл бұрын
Let me show you how I build this, and provide all the links EXCEPT the links to the plans.
@XploreRangerNZL
Жыл бұрын
He literally gave you the name of the channel who made the plans how much easier do you want it
@conradnear4068
7 ай бұрын
Oh you poor man. Can I get you a tissue? The first 30 seconds said were to get the plans.
Пікірлер: 53