watched like 7 different videos on this case, this was by far the best and most thorough video that answered all my questions. Love the content.
@robeytech
Жыл бұрын
Thank you!!
@hytebrand
Жыл бұрын
Thank you Robey for the great review as always. 💛 We're super appreciative of the continuous support you have given us!
@epicmike3915
Жыл бұрын
You really need to stop forcing people into vertical gpu mount. Get rid of that and make this case 100$. I went the NZXT route because of that.
@3dprintingkid709
Жыл бұрын
@@epicmike3915 I like it but they should keep the riser but have vertical and horizontal mount options
@epicmike3915
Жыл бұрын
@@3dprintingkid709 Agreed. You should have the option. That's my issue.
@LordComdrGC
Жыл бұрын
Just a heads up for people building. The NZXT Kraken 360s or Z73s allow for a rear fan in the build. I was able to put in AL120v2's in. A little tight, but it fit. Also, changing the bottom fan to a great static fan like a T30 or the new Lian Li P28 is a great thing to do. Also, a custom fan curve on your GPU will make a world of a difference with your GPU temps. Alot of these new GPUs like to leave the fans off till they start to warm up.
@Cyanized7
11 ай бұрын
I currently have a rear exhaust fan installed with my 360 radiator so I'm very happy with the build.
@HOMERUN1379
Жыл бұрын
I love my Y60, I think both are an amazing deal as it comes with the gen 4 riser cable that goes for 50$ bucks by itself. Factoring that in it brings the cost down a lot and is well worth it in my opinion.
@DEVIANT...
Жыл бұрын
cant wait for mine. awesome watch as usual.. i watched a video were they slide radiator all the way forward and the fan fits in the rear Np.. tip the creator of HYTE was the lead case engineer at NZXT, they even work out of the original NZXT office
@robeytech
Жыл бұрын
Yep there are some cases where you can get that rear fan in. But in three out of four builds we couldn’t get it to fit and in the fourth we only got two screws. I did know that about the designer ☺️
@domis531
Жыл бұрын
@@robeytech How about attaching it on the outside? Maybe wouldn't look too bad.
@thomasandbecky
Жыл бұрын
love the case just built in one! one more thing to note is ram height if you are using the 360 aio on top. thanks for another great review! the rear fan fit in mine with the phanteks 360 mph aio. just fyi for those out there.
@Arvi_The_Clown
Жыл бұрын
Can you share what is the clearence?
@faraz-i3x
Жыл бұрын
Thanks for another great video. These are really gonna help me choose between the Y60 and Y40 in a few months. Also just want to say I love the content and quality of your videos. You've quickly become the first channel I search for whenever I wanna research something for my next build.
@SlickThoGaming
Жыл бұрын
i just built in this case and it was my 1st pc build and i love it! came out so good
@erictriola6780
Жыл бұрын
Awesome video as usual, I am torn between the hate y40 and the Montech sky two. Maybe the Montech sky two review in the next couple of weeks?
@robeytech
Жыл бұрын
We haven't received one yet :(
@ethaneaves_04
9 ай бұрын
What case did you ever decide im stuck in between both rn
@kamata93
Жыл бұрын
Was split between this and the Fractal North. Eventually the Fractal North lost because the side panel was not a full glass. It had that stupid metal piece from the side which obstructed your hardware when looking into the case. Otherwise its handsdown a better case. Will buy the Hyte Y40 in the summer hopefully. Cant wait!
@keithmarcus8638
6 ай бұрын
At 150 it's just a tad bit too expensive. 99 dollar cases can beat this without question if you're doing normal builds. But for homelabbers, being able to still fit half-height cards alongside 3-slot GPUs is a pretty big feature. I hope other case manufacturers copy this, so I would have more options
@terencetana7504
Жыл бұрын
Great video as usual. For the rear exhaust fan, I think depends on the 360 aio being used. I managed to fit a standard 120mm fan back there using arctic liquid freezer ii 360 aio. Worst case you could fit a slim 120mm fan too.
@shadowminor
Жыл бұрын
You can fit a rear fan with the right 360 aio. Your Deepcool is 402 mm overall length. NZXT Kraken 360 aios are 394 mm overall length. The extra 8 mm allows most fans to fit. Though just barely. And maybe not the Lian LI uni v2 as those are thickboy fans.
@danfast23
Жыл бұрын
I have the white version, atx motherboard with cooler master 360mm on top, mounted with p12 noctua fans and another on the rear, not any issue at all, great video btw
@Andersg85
6 ай бұрын
Hey Robey, I don’t know if you ever see this, but if you really think the rear fan have any affect on the temps you can just mount it outside on rear end.
@luisdi3462
Жыл бұрын
I'm still going on this case, I like the size and looks, thought about the o11 dynamic evo but it's too big, I'm not an i7 or i9 user, so the unlocked i5's with a side 240mm or 280mm at the side will do, that's what I feel, also the vertical mount included is nice because the upright bracket I wanted on the o11 is like +80$ PD: put the rear fan on the outside, no one will know
@PaulLemars01
9 ай бұрын
So here we are 9 months later and I bought a red Y40 from Newegg for $115. I'm moving my I5-12600 / RX6800xt based machine into it for a bit of a refresh.
@wadeepperson6906
7 ай бұрын
I have this case myself. Some of the videos I’ve seen seemed a little unfair to the case. Two fans no extra fans, no water cooling when that’s what’s suggested to use. I have a 360 aio and a total of 6 fans 3 on the aio 2 in the front and the bottom one. I lost the back one due to the radiator.
@spudog31
5 ай бұрын
What you mean you cant put a fan in the rear with a 360 . Ever heard of Noctua NF-A12x15 PWM chromax?
@Radek-e9o
7 ай бұрын
Everything is great, but how to disassemble the filters for cleaning?
@russellbower2557
Жыл бұрын
Nice review. When is the next Twitch PC build? I see you have a build parts list on your site from 2/21 but no video of it.
@robeytech
Жыл бұрын
Saturday 2.25
@NyteStalker89
Жыл бұрын
I fit a 360mm aio in the top with a rear 120mmm and I used the chonk boi Arctic liquid Freeze ll... But I used NZXT F series fans which aren't as extra thick like those lian li's
@ncjsgrki
Жыл бұрын
You could squeeze a Noctua slim fans on the back.
@jimervin2472
Жыл бұрын
Im Running an Arctic Freezer 240 AIO up top, with Lian Li SL infinity fans and I have a 3rd SlL infinity fan on the rear and it fits no problem. I wonder if the Deepcool lt 720 with the SL infinity fans would allow a rear fan? According to the Video it is not possible with the Lian li SL v2 fans.
@steelzepplin2012
Жыл бұрын
I got a quick question, will the Hyte Y40 fit the vertical mounting of the Asus Noctua 4080??? (I heard it is 4.3 slots) Please let me know and thank you!!!
@matthewrezuke8130
Жыл бұрын
I like the compact size compared to other cases.
@robeytech
Жыл бұрын
It is a nice size ☺️
@epicmike3915
Жыл бұрын
This isn't compact at all. I put it right next to a H7 flow at Micro center. Is barely that much smaller.
@MaCK0y
Жыл бұрын
Damn! l was looking for someone to answer whether there is enough clearance bewteen the PSU and the side panel for the Corsair PSU Shit series connectors. Thanks!
@clanstringing8019
Жыл бұрын
Unfortunate that with a 360 rad on the top and Lian Li SL 120 V2 fans the rear fan doesn’t really fit. I had to lower it and just use the two top screws
@shadowminor
Жыл бұрын
The V2s are definitely thickboy fans. I am looking to use the CoolerMaster MasterLiquid PL360 FLUX aio because it has a overall length of 394mm vs the 402mm of the DeepCool LT720 he had in this build. I do wish they had checked more aios when designing to account for this variability. I have found some 360 aios with an overall of 404mm. One centimeter doesn't sound like much but with the config this case has it is big.
@PurusothamanSV
Жыл бұрын
Can you do a review or build in Deepcool CH510 Mesh Digital?
@robeytech
Жыл бұрын
Yep! It’s in the works
@JoshTrue-xt9bf
22 күн бұрын
What aio is that?
@alexm7166
8 ай бұрын
I got a rear fan in. Just drop the screws. It’s only like 3mm
@zzhkszz
Жыл бұрын
Can i fit lianli fan v2 on rear if i mount lianli aio 360mm? Anyone here have any idea? Thanks
@djtechno95
Жыл бұрын
6:31 - You said "you can repliclate it" - Freudian slip? 11:11 - Mentioning CPU temps while blurting out "GPU" instead of "CPU"... Somehow I wish there was a blooper reel at the end of each review video...
@robeytech
Жыл бұрын
I am only human 😀
@technologyrethinked
Жыл бұрын
what is funny now a case cost half of a console...
Пікірлер: 51