That is really a sweet ride. I worked for a Buell dealership and went to many track days with the Buell compay. I’m a fan forever and I have a heavily modified M2. I appreciate the owner/builders obvious love of these magnificent bikes.
@brasstacksboxing409
3 жыл бұрын
Bet that job was awesome. It is an awesome bike.
@gmclll5371
Жыл бұрын
where can I see pics your cyclone? I'm on the fence about an X1 and an M1, Thanks in advance
@davidtaylor8304
4 жыл бұрын
Pleased to see an old, tube frame Buell being so loved-up on the road. Excellent saddle style and the way it blends into the tank and narrow at the thighs, my Corbin saddle is so friggin wide I can get only one boot on the deck. Top job, bud.
@stevanrozic4638
6 ай бұрын
A real beauty , tube framed Buells are the best looking
@simontompson
7 жыл бұрын
Wow, I never thought the word 'beautiful' could ever be applied to a Buell. I think you just proved me wrong!
@jarisiuronen3912
7 жыл бұрын
Simon Tompson Thank you very much. Unfortunately it belongs to someone else now. Sold it a week ago...
@malipera984
6 жыл бұрын
+Jari Siuronen Is the engine for sale??
@reidspeed77
2 жыл бұрын
That is what an EB is supposed to sound like What a unit 🔥
@Gloomshadow100
7 жыл бұрын
Very slick. . one the best x1 i have seen.. the tail is perfect.
@jarisiuronen3912
7 жыл бұрын
Thanks. My goal was to make my X1 use all of its potential. Not too much changes
@Gloomshadow100
7 жыл бұрын
Jari Siuronen yeah.. less is more. is this your only Buell?
@jarisiuronen3912
7 жыл бұрын
Gloomshadow100 Unfortunately it is my only one. I would love to own bone stock S1 one day and perhaps build a tube framed xb 😀
@Gloomshadow100
7 жыл бұрын
Jari Siuronen the s1 is a good looking buell,.. i have 2 XBs you can see them in my videos. i would leave the xb as it is, the frame is super good, the handling is superb.
@tylerfabish5578
5 жыл бұрын
coughs off idle just like any good buell does. but when the revs go up DAMN!!! sounds so smooth!!! You sir, represent the american badassery on the other side of the world!
@Headroom1001
2 жыл бұрын
It looks like a modified M1 to me. Since my first encounter with a tube Buell I'm fond of the brand. So I own a CAN 🙂
@Chris-yy7qc
5 жыл бұрын
Looks badass. But why are those header tubes crossing? Wouldve looked much better if they would not cross...
@droberts9440
4 жыл бұрын
Great looking bike. Oil tank is fantastic. Great build pics on finnbiker.
@GarageBuddys
5 жыл бұрын
nice project , we had the same idea for the oil tank. I am undecided whether on the tip or in the rear swingard
@marceloseixas5024
6 жыл бұрын
That frame is spetacular!!!
@robertduffner6346
3 жыл бұрын
The gold engine covers… what are they? they look awesome.
@ronnycissek
2 жыл бұрын
Very good work!!! Wich triple tree have you used for the conversion to 28,6mm Handlebars?
@friedchickengossip
3 жыл бұрын
Very nice build
@jeremychangthoralek
7 жыл бұрын
That seat❤
@williamarden5441
4 жыл бұрын
I have an 01 X1. Hows your key down there haha. Plus why so quiet. Mine is frekin ridiculously loud
@TheNobleLoyalist
7 жыл бұрын
I want it bad!! LOVE THE SEAT all the way to the rear!! Cool gauges too, i am assuming the speed is displayed below the tach digitally where those red numbers were? Swiftly that!! is this custom or is this actually manufactured by Buell? what ywar is it?
@jonnymac8925
5 ай бұрын
Please tell me you still have this beautiful unit?!
@jarisiuronen3912
4 ай бұрын
Unfortunately no 😢
@Nightingale1887
7 жыл бұрын
What a machine.
@mikehenderson6397
6 жыл бұрын
What are you using for the oil tank? Nice bike!
@jarisiuronen3912
6 жыл бұрын
In front of the primary case. Part of the chin spoiler.
@markusweyerer
5 жыл бұрын
perfect bike
@SSBall3r
6 жыл бұрын
are the fork clamps a custom piece? The standard units have a slant design for the bar mounts and they extremely limit choices in bars, risers, and tachs.
@jarisiuronen3912
6 жыл бұрын
SSBall3r I machined original risers flat and filled little holes that remained. Then drilled new holes for Renthal universal clamps for fatter bar
@georgeknox
6 жыл бұрын
This build is amazing. Can I ask what bars you added? Any way we could have the link to copy you? Thank you
@jarisiuronen3912
6 жыл бұрын
George Knox Bars are some cheapo knock off Fatbars that i bought used and modded.
@sveinmagnussen2967
2 жыл бұрын
Really nice build 💪😁
@norseman5041
7 жыл бұрын
Nice bike, really bad to the bone. Should be able to go riding soon in Finland.
@jarisiuronen3912
7 жыл бұрын
Thanks. I'll hit the road as soon they are cleaned. Now its like driving on marbles 😯
@ブリはまち-z4r
2 жыл бұрын
coooooool!!!!
@eero-heikkipuustinen6393
6 жыл бұрын
Todella kaunis!! Tykkään. Hienoa työtä!
@jarisiuronen3912
6 жыл бұрын
Eero-Heikki Puustinen Kiitos.
@LucaMoretto88
7 жыл бұрын
The digital one aftermamarket, of course!! :)
@guidodias1546
4 жыл бұрын
Piece of art 👌🏼
@LucaMoretto88
7 жыл бұрын
Could you tell me please the rpm/tacho gauge's model (or, however, the brand)?? Thanks ;)
@jarisiuronen3912
7 жыл бұрын
Luca Moretto Tacho is all original Buell X1 piece and the digital one is Motogadgets mini in custom housing.
@staccio80
7 жыл бұрын
most cool buell i ever see!!!have u schematics for LED cluster?
@jarisiuronen3912
7 жыл бұрын
elvis mattia Thanks. Speedo is made by Motogadget and the idiotlights are homemade...
@staccio80
7 жыл бұрын
Jari Siuronen led with a resistor in place of original lamps right?
@jarisiuronen3912
7 жыл бұрын
elvis mattia I machined the speedo housing from aluminum and the resistors are soldered straight to leds and casted in epoxy i778.photobucket.com/albums/yy67/tuuneri/Buell%20X1/20151119_194545.jpg
@staccio80
7 жыл бұрын
Jari Siuronen thanks for info and compliments again for your bike!!!
@antonellolomonaco158
6 жыл бұрын
Hello. How many millimeters is the diameter of the taillight? Where did you buy it?
The quality of the unit is very poor. It did not like vibrating at all. Had to cut it open and fill it with epoxy
@antonellolomonaco158
6 жыл бұрын
Jari Siuronen Thanks so much. I installed a 20 mm diameter taillight on my bike. My fear is that it is not very visible. What do you think about it?
@VCoz
4 жыл бұрын
What did you have to do to run those forks?
@jarisiuronen3912
4 жыл бұрын
Stock forks anodized
@taitjones6310
6 жыл бұрын
This is really well done. Are you using a Ducati headlight?
@jarisiuronen3912
6 жыл бұрын
Vrod headlight
@josephandreuccetti8043
5 жыл бұрын
How did you mount it?
@taitjones6310
6 жыл бұрын
is that the oil tank on the front, over the clutch cable?
@jarisiuronen3912
6 жыл бұрын
Yes it is.
@OttoTheImmortal
5 жыл бұрын
Is that a completely custom oil tank or does someone sell it as a mod?
@irog
4 жыл бұрын
what a buell! brutal!
@DjVendetta
6 жыл бұрын
Amazing build.
@watson1381
7 жыл бұрын
is that seat custom? or can you buy it?
@jarisiuronen3912
7 жыл бұрын
Walker F Seat is all hand made. Base is 3mm aluminum topped with very heavy foam. It's like smaller and firmer version of the original
@bighomieJ5X
4 жыл бұрын
The rear subframe is that custom? I want it
@jarisiuronen3912
4 жыл бұрын
Tubular custom subframe 👍
@bighomieJ5X
4 жыл бұрын
@@jarisiuronen3912 ok I'm looking at a sweet deal ona X1 now and I wanna replicate this look
@fvgc454ss
6 жыл бұрын
That fukr is badass my friend. BUELL!
@amg409
5 жыл бұрын
Sooo Baddaaas! 🤘🏽
@williamarden5441
3 жыл бұрын
No x1 later year as the key is in the dash
@jarisiuronen3912
3 жыл бұрын
Key was in the dash. Not anymore...
@themuseicman
7 жыл бұрын
That's a nice bike
@LucaMoretto88
7 жыл бұрын
Thank you so much, Jari!!! Lamps! ;)
@jasonkaufmann7618
7 жыл бұрын
Tail lift?
@jasonkaufmann7618
7 жыл бұрын
And can that seat two?
@jarisiuronen3912
7 жыл бұрын
No & no
@thenapperfamily
7 жыл бұрын
We love our twin XB9R FIREBOLTS check out a few of our vids if ya want.
@paisa1990
5 жыл бұрын
So goooood
@mtridgee11
7 жыл бұрын
That thing is sweet~!
@tbobmann229
5 жыл бұрын
awesome!
@zygmuntmucha5894
7 жыл бұрын
SUPER
@albertmichall5732
Жыл бұрын
sweet
@EltonMaron
7 жыл бұрын
what value
@jarisiuronen3912
7 жыл бұрын
elton maron What do you mean? Price?
@EltonMaron
7 жыл бұрын
Yes Price
@jarisiuronen3912
7 жыл бұрын
Here in Finland these go for 4-7 thousand euros. I got okay for this one
@EltonMaron
7 жыл бұрын
thank you I loved your machine,
@GenerationAsian
7 жыл бұрын
so bad ass!!!
@jarisiuronen3912
7 жыл бұрын
Thanks 👍
@didiercure9242
7 жыл бұрын
beautifulllllllllll bike !!!!!!!!!!
@jarisiuronen3912
7 жыл бұрын
Didier Cure Thank you
@didiercure9242
7 жыл бұрын
not possible to have it more naked !!!! great !!!!
@jarisiuronen3912
7 жыл бұрын
It has everything it needs ☺
@Gloomshadow100
7 жыл бұрын
Jari Siuronen yes, extreme purity. ... now i want to build a x1. i hav3 built 2 xb models already ....love them both.
@reidspeed77
2 жыл бұрын
Julia the dogs eaten the seat again
@kritromulus6851
6 жыл бұрын
BikerForce..BULL ELL ))))
@getoffmygrass6974
5 жыл бұрын
Slick Tuber...the 03 and up were absolutely more reliable and all around better performance machines ( stock, not looking for an oil argument)but bar none those look the best and give off a more all around muscle look...handsome bike and very tastefully done, not over modded. The day you get rid of her hopefully I’ll add it to my collection, the day after will be your first day of regret
Пікірлер: 102