What's wild, the fourth gen camaro radiator and fans fit perfectly in a gbody
@GBodyRicky
Ай бұрын
Might have to check that out I’m looking to upgrade my radiator soon preciate that
@Avg_car_guy
Ай бұрын
exactly what I used. Ebay from a SS 2012 on my Griffin Radiator. $125 180 degrees all day in Fl.
@GeneG-wk2mz
Ай бұрын
Nice grand nation rearend will do the job also
@mr.g.d.i.y
Ай бұрын
Looking good! I ain’t care about my engine bay at first 😂. Also 210-215 is fine for LS they run hotter than small block. I thought the same when mine got hot. I still got better fans I’m around 185 myself it just feels better! 😂
@GBodyRicky
Ай бұрын
Fa sho had me worried bruh
@joelscott8901
Ай бұрын
New subscriber outta georgia
@GBodyRicky
Ай бұрын
Welcome fam preciate the sub
@coreybenson5162
Ай бұрын
Clean swap do you have the part # for those fans ?
@GBodyRicky
Ай бұрын
www.jegs.com/i/Proform/778/67038/10002/-1
@GBodyRicky
Ай бұрын
That’s them right there fam
@demarcusbattle7850
Ай бұрын
Bad ass tho man.💯💯
@yolandaferguson1664
Ай бұрын
Nice cuz❤❤
@demarcusbattle7850
Ай бұрын
Yea we need that tips and tricks.😂
@GBodyRicky
Ай бұрын
Got you gang imma drop it soon click that sub button so you get the notti
@demarcusbattle7850
Ай бұрын
Bet. Yea I got that 85 regal to.
@jermaineflowers9906
Ай бұрын
This mf tough man drop everything bro we need the info
Yea them ebay fans is junk….i had to replace mine with a spal h.o. Fan…..in both my LSA nova and vortech supercharged LS c10…..your engine bay looks very sanitary!!!!…..i got a few vids of my nova and c10 if u wanna check it out
@forged_billions2
18 күн бұрын
Gotta get the high end ones
@trentdawg2832
17 күн бұрын
@@forged_billions2 yes u do, especailly if u live in a warmer state
@lvallejo88
Ай бұрын
Just subscribe bro. I'm currently in the process of ls swapping my cutlass with a 6.0 as well might needs some pointers from u big bro.
@GBodyRicky
Ай бұрын
Fa definitely gotcha fam
@kingartsprojects4150
Ай бұрын
Nice job! Where are you located? Getting ready to do my 80 Malibu Landau. Never did one before but I think I can do it with a little help and patience.
@GBodyRicky
Ай бұрын
I’m in southeast ga and ill be dropping my tips and tricks video next week it’ll definitely help out
@4door_vette04
Ай бұрын
Ricky, that summit balancer the 25% drive? And if so do you remember what size belt you used?
@arniecann1133
15 күн бұрын
Hows the e-fans working out!!!
@TheSqad874
19 күн бұрын
Link fa the elbow that fit 102mm throttle body I can’t find one
@tytysmooth2786
Ай бұрын
I’m building the same exact thing but I bore my motor to a 6.2
@GBodyRicky
Ай бұрын
Good stuff I plan on beefing up my motor later after I get it to a solid setup
@BIGZAY.1K
Ай бұрын
Do you have link for spark plugs, spark plug wires as well as oil catch can?
@GBodyRicky
Ай бұрын
I think it was all eBay fam the spark plugs are ngk I said the wrong thing in the video
@jimmiedjohnson2
Ай бұрын
How did u mount your radiator and do you have part numbers for the radiator hoses
@GBodyRicky
Ай бұрын
I lost the part number for the hose but the radiator mounted in the factory space used the same rubber boots for the bottom that came on it
@80BoyMC
Ай бұрын
Ok bro your shit looking nice, check me out
@GBodyRicky
Ай бұрын
Fa sho bruh u definitely clean I hit that sub button
@tru_widebody3924
Ай бұрын
What’s the link to the fans. I definitely need to change mines
@GBodyRicky
Ай бұрын
Check a few comments down fam somebody else asked about em and I posted them there
@tru_widebody3924
Ай бұрын
@@GBodyRicky thanks bro I just seen it I needed them. Good looking out💪🏽
@Deextheplug
Ай бұрын
Where you find the plate where the old ac go
@GBodyRicky
Ай бұрын
I got it off eBay fam look up your year and Ac delete plate
@atlfat9682
Ай бұрын
Aye big dog where bout in Ga u at ? Im in Atlanta , eastside
@GBodyRicky
Ай бұрын
I’m in southeast ga fam
@atlfat9682
Ай бұрын
Oh ok that's wats up u got that mf right tho my boy 💯🙌🏽🔥
@MrOlds8488
Ай бұрын
E71994 be a cleaner upper radiator hose.
@GBodyRicky
Ай бұрын
Preciate that bro
@makeitrun6504
Ай бұрын
How'd you hook up the trans cooler?
@GBodyRicky
Ай бұрын
@@makeitrun6504 plastic locking clips and some ptfe hose with A/N connectors
@MrOlds8488
Ай бұрын
@GBodyRicky no problem, worked well for me.
@Tgottarun
Ай бұрын
Is it any different from ls swapping a box Chevy you think ?
@GBodyRicky
Ай бұрын
Nah I thinks it really all the same
@sleepersportlabs
Ай бұрын
I know fa sho dat bih running
@GBodyRicky
Ай бұрын
Definitely bout to see after this rear end swap fam right now I got those turtle 2.42 gears
@fla8one3
2 ай бұрын
How did you run your wire harness
@GBodyRicky
2 ай бұрын
Install and tips video coming soon
@chriswyatt9104
Ай бұрын
Make a video of how u wire the transmission harness.... fir some reason I only got end gear and reverse
@GBodyRicky
Ай бұрын
@@chriswyatt9104 I got you bro
@kingartsprojects4150
Ай бұрын
Would you do a swap?
@GBodyRicky
Ай бұрын
Honestly I probably wouldn’t I only enjoy working on my own projects
@bsbs-so4gc
Ай бұрын
upper rad hose is kinked and running against your intake.
@GBodyRicky
Ай бұрын
The angle of the video maybe has it looking like that but it’s not touching and it’s not kinked just the way the hose is made been running this for over a year now and runs at 185 degrees in 95 degree weather
@gingerbreadman7536
Ай бұрын
I know damn well you didn’t say CD player!!😆😆😆
@jemelmonger
Ай бұрын
😂😂 i think he just meant radio.
@GBodyRicky
Ай бұрын
😂😂😂 chill fam I’m new to this i just be trying to talk without stuttering I say the first thing I can think of 😂😂
@jemelmonger
Ай бұрын
@@GBodyRicky Hahahh aye. I feel ya bro! I was the same way when I first started vloggin 😂
@gingerbreadman7536
Ай бұрын
@@GBodyRicky I know, but you got this and I’ll be watching your build. Good luck!!
Пікірлер: 91