Great video! Would've liked to see how you cut and chamfered the slats for this, especially how you prevent breakout with the slats being such small dimensions.
@jeffreywinter866
8 ай бұрын
Yes. I have basic skills and tools and wonder how to craft slats that are the same size without breaking them
@bigsparky65
2 жыл бұрын
Very interesting, never seen one made before. Very clear and easy instructions, fantastic video
@uhN0id
7 ай бұрын
Legitimately one of the coolest projects I've seen. I'm building my work from home office into my guest room closer and want to hide it all if we have guests staying with us so it's not so ugly but don't want big sliding closet doors getting in my way while I work and this is perfect. Now let's see how well I can build some 80" tall tambour doors haha. Great explanation and demonstration!
@peterjf7723
2 жыл бұрын
Good clear instructions, thank you. I will now have to find a reason to build one for myself.
@MrPatdeeee
2 жыл бұрын
Very interesting. Thank you...
@BigstickrulerofIoW
6 ай бұрын
brilliant video. Very helpful Would there be any restrictions or problems with making the door 4 foot high?
@bethmaguire414
10 ай бұрын
Is there a reason people don't do full size doors in tambour? I have a space in my home that I think a full size tambour door would work great but I can't find one to purchase anywhere.
@blaketracy4377
2 ай бұрын
Weight probably. Too much friction with the weight would make it hard to slide.
@heavyice1
2 ай бұрын
@@blaketracy4377What if we use rollers or bearing to support the weight and reduce friction?
@nicktubara
5 күн бұрын
Have you thought about making your own now that you saw how it's made? I'm sure you'll be great with power tools as you are with make up😊
@jerryjohnsonii4181
2 жыл бұрын
Fantastic video !!!!!!!!!!!! Thanks for the knowledge
@frankcornfield5915
2 жыл бұрын
Excellent informative video.
@Damon_Barber
2 жыл бұрын
Made it look so easy I wanna try it!!
@MukehJohnson-q1u
7 ай бұрын
So beautiful
@Pembroke.
2 жыл бұрын
Fun project with the kids thanks
@leagratch8718
3 ай бұрын
Loved this! It's given me hope I may well be able to solve my tricky problem Thanks so much
@saxjonz
5 ай бұрын
Thank you so much for this video.
@LEOARM77
Жыл бұрын
Great video ! Thanks for sharing.
@feroluce
5 ай бұрын
I want to make tambour door like these (sliding horizontally) for a cupboard 100cms high. Is there a possibility that the door will be too heavy to move along the track? Whats the highest I can make a tambour door without worrying about it not moving?
@brucelavis4934
Жыл бұрын
Thx for the video. When you installed the tambor doors, I noticed that at the bottom of each slat of wood there was what appeared to be a "rabbet cut" to get door to work better. When and how did you make the rabbet cut and is there rabbet cut on the top of slats? Thx again Bruce
@giaoong
Жыл бұрын
9:26 He used a table saw
@paulmaryon9088
Жыл бұрын
Excellent! A very instructive video, thank you, can't wait for an opportunity to make one.
@bradleytuckwell4881
2 жыл бұрын
It looks great thanks
@cindykiefnerthecoppertorch7789
2 жыл бұрын
Excellent video!
@kaminfarhoodi3730
2 жыл бұрын
Very interesting 👌
@dwainland1310
Жыл бұрын
When it comes time to pull it out of the rack I wonder if rolling it up on a dowel would be easier.
@denimjez
8 ай бұрын
How did you make the mirrored groove?
@superrmaz
6 ай бұрын
Can this be made bigger? 180x150cm?
@suntzu6122
5 ай бұрын
Sorry if you said but how deep is the channel that it rides in?
@arthendrickson4860
2 жыл бұрын
5:19 Tape on your right misplaced and you fixed it off camera. Might be helpful to others to mention verifying tape placement before proceeding.
@austinhastings8793
2 жыл бұрын
@@BiggMo Nah. It was clearly "off" and I spent the next minute or so looking at it trying to figure out what I was getting wrong. Easier (& honest!) just to edit in a little graphic "We put the tape wrong here" and carry on.
@kylerobinson2084
2 жыл бұрын
The tape on his right never moves?
@arthendrickson4860
2 жыл бұрын
@@kylerobinson2084 The tape has been moved later in the video. The tape is misplaced at 7:02 and correctly placed at 7:03.
@craigholt4263
Жыл бұрын
Would you make a set of doors to order?
@JPLVNYC
2 жыл бұрын
How wide and thick are the slats?
@DUSTEATER2
Жыл бұрын
You never showed how to make the slats, width, height or chamfer/roundover.
@chipperkeithmgb
2 жыл бұрын
Tambour in French means drum
@wisloka1997
2 ай бұрын
He move blue tape 😅
@BigbenBigben-iz5xr
2 ай бұрын
Put a wall where you said this weird opening. On both sides of the staircase. put a door swing inward into the room. But if you want to be unique about it. You put the walls in the same spot. This is old technique that people used to use on oldfurniture. Here's a KZitem Channel that shows you how to make it. Basically, it's a quarter round of pieces. Of wood. You glue them to a piece of heavy duty canvas. You put groove in the top and the bottom where the door is going to go. And stop. m.kzitem.info/news/bejne/t6VutIN6e311fZg#searching
Пікірлер: 40