Hey everyone! The comment section has finally been re-enabled over the whole channel after 2 years by KZitem themselves who shut it down in the first place. Glad to be in touch with my viewers again! :)
@maureenadegoke5446
Жыл бұрын
I need help with the same project and I found yours on KZitem
@maureenadegoke5446
Жыл бұрын
Can I please 🙏🙏 have your Gmail address. I need help with this and I just have 7 days to go
@hertzmaddentv8304
3 жыл бұрын
Amazing project, Max!
@MaxImagination
3 жыл бұрын
Thank you! :D
@happyhsu140
Жыл бұрын
It's awesome I am going to try
@MaxImagination
Жыл бұрын
Thanks for commenting. Great! Best of luck.
@motowiredexperiments
Жыл бұрын
Can you provide some final connection and diagram i want to use this sam for my gold shop security
@MaxImagination
Жыл бұрын
Hi there. If you take this diagram - drive.google.com/file/d/1D_uhYmozksXxdWo3acg8Hx82iUtmN3g7/view?usp=sharing and combine it with this diagram - drive.google.com/file/d/1aGNoy611j2GMb6tWYj79BROibZ3OKPLQ/view?usp=sharing you'll have a functioning circuit, as long as you follow the connection points labeled (Ard 1 & Ard 2, etc.) Cheers.
@motowiredexperiments
Жыл бұрын
@@MaxImagination thanks
@sepaselavaki8018
11 ай бұрын
I've follow your instruction up to the last, the arduino says "avrdude: cannot locate 'flash' and 'boots' memories in description"... May i ask Do you know whats the problem
@MaxImagination
11 ай бұрын
There might be an issue with your board or the code is too long for it (has run out of memory). Please try looking of forums for possible answers. Cheers.
@young_kdo9877
Жыл бұрын
For the detection is it possible to use the laser sensor by itself to detect when something has tripped it? Can the laser itself tell you when its been tripped? Or is it best to use a photoresistor like you did here?
@MaxImagination
Жыл бұрын
With cheap open-loop feedback lasers as the one used in this video, using a photo-resistor in combination is the only way. Cheers.
@mochidarshan6748
5 ай бұрын
What to Select in Other Board and Port in Arduino IDE
@MaxImagination
5 ай бұрын
Select Arduino Nano as your board and the COM port that appears when you plug in the board to your PC.
@MarkJasonYT
3 жыл бұрын
hi idol max
@maureenadegoke5446
Жыл бұрын
🤗
@MarkJasonYT
Жыл бұрын
@@maureenadegoke5446 hi
@maureenadegoke5446
Жыл бұрын
Do you know how I can reach Max? I actually need his help
@abhaysachan2796
7 ай бұрын
can we use arduino uno instead of arduino nano
@MaxImagination
7 ай бұрын
Yes, as the pin-out and usage is exactly the same.
@abednegoonsongo9652
5 ай бұрын
I used a 470uf capacitor and a 560uf capacitor but still the sim 800L is not connecting to the network, what might be the problem
@MaxImagination
5 ай бұрын
The power supply may be the problem. What power supply are you using?
@iamhasan213.
10 ай бұрын
I subscribed
@MaxImagination
10 ай бұрын
Thank you!
@ankitmandal3148
3 ай бұрын
Which SIM support GSM module....2G ..3G...4G..?
@MaxImagination
3 ай бұрын
This was 4G, I believe...
@abednegoonsongo9652
5 ай бұрын
Hi Max, after using the code you provided it just sends an sms on my phone saying Hi! Its the alarm. Type on to activate,, buy when i type on there is no response, please help me
@MaxImagination
5 ай бұрын
Hi. Are you sure you have credit on your mobile phone? Does the message get through?
@abednegoonsongo9652
5 ай бұрын
@@MaxImaginationyes i have enough credit
@abednegoonsongo9652
5 ай бұрын
@@MaxImaginationsorry i had made an error but i have corrected,,now the system is working 😊 thanks max for your help
@ramananbaskar6840
10 ай бұрын
Would I be able to integrate a RPIF module in this? And possible a fingerprint option in the mobile app to turn off the alarm?
@MaxImagination
10 ай бұрын
Don't you mean "RFID"? I've never used either of them before so I wouldn't be able to help you on that.
@Gluttony928
5 ай бұрын
can i use arduino uno board rather than a nano board?
@MaxImagination
5 ай бұрын
Yes, you can. The use the same chip and practically work the same, but are different sizes.
@just_joo2
5 ай бұрын
What did you use for the coding
@MaxImagination
5 ай бұрын
A computer and the Arduino IDE.
@ramananbaskar6840
9 ай бұрын
Can i use an ldr module instead of the circuit you built on your own in the previous video. Thanks!
@MaxImagination
9 ай бұрын
The circuit already uses an LDR module. Could you please be more specific? Cheers.
@ramananbaskar6840
9 ай бұрын
@@MaxImagination I mean a readymade LDR module available in the shops. Please look it up
@motowiredexperiments
11 ай бұрын
I made it all same but after typing activation password it doesn't perform further there is no response please help
@MaxImagination
11 ай бұрын
Hi there. Can you tell if your GSM module even works? Please try putting a 50 microfarad filtering capacitor across its power terminals, this might help it start up.
@abednegoonsongo9652
5 ай бұрын
Hello. What are you using to power the Arduino
@MaxImagination
5 ай бұрын
Hello there. I used an LM2596 DC to DC buck converter.
@abednegoonsongo9652
5 ай бұрын
@@MaxImagination also i used a 470uf capacitor on the sim 800L but it still doesn't connect to the network what might be the problem
@shariffphotography884
6 ай бұрын
really interested to buy like this, but from malaysia... can i ?
@MaxImagination
6 ай бұрын
The project, no, but you can probably buy the parts.
@abednegoonsongo9652
9 ай бұрын
Can i get a project report of this project
@MaxImagination
9 ай бұрын
A report?
@abednegoonsongo9652
9 ай бұрын
Yeah a project report
@MaxImagination
9 ай бұрын
@@abednegoonsongo9652 I don't have a project report of this. There's a video and resource files in the description for you to download. Cheers.
@abednegoonsongo9652
9 ай бұрын
Thanks you
@abednegoonsongo9652
9 ай бұрын
I like your project
@maureenadegoke5446
Жыл бұрын
I need help in executing this same project!
@MaxImagination
Жыл бұрын
How can I be of help? What is the problem you're facing?
@maureenadegoke5446
Жыл бұрын
Follow up and assistance generally to execute the project I don't want to mess up and leave it half way. But, if I have someone that follows up I would finish the project successfully
@user-sq5jx4ir9d
8 ай бұрын
Source Code?
@MaxImagination
8 ай бұрын
Linked in the description.
@BLEE_mahanteshBonur
Жыл бұрын
What is it's cost
@MaxImagination
Жыл бұрын
Price can vary from country to country. For me, around $20.
@naromsky
4 ай бұрын
Add this, add that. But why?
@MaxImagination
4 ай бұрын
Why what? If you find my project too complex, consider using only an Arduino board with the GSM module using more code to suffice for the features the green alarm board has.
@naromsky
4 ай бұрын
@@MaxImagination With respect, etc., one could easily argue the project was too complex for /you/.
Пікірлер: 65