If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@davidspencer8373
10 ай бұрын
Like video
@davidbassett4577
10 ай бұрын
A lot of wires, led bulbs motors this time Wayne! Will be good to see how they all fit inside the model in future issues.
@mikeking2539
10 ай бұрын
Wow that's a lot of motors.. lol! It's good that all the wires and plugs are already numbered ! P.S Hope that you had a great time with Lou and Phil!
@stephenedwards5254
10 ай бұрын
I'm currently building this. I'm on issue 37 now. Its a interesting build
@richardslezak1274
10 ай бұрын
Agree with you on how to package the wiring. Also, Vincient looks great on the wall.
@jameshebert5430
10 ай бұрын
At least there's no red self destrcut button!
@petelewis9026
10 ай бұрын
Nice job Wayne 👍🏻
@matthiasbonnici5266
10 ай бұрын
I agree that they should have put the wiring in two packs and give you something to build. It would be a let down for me that this was all there was to do this time.
@nigelvickers6496
10 ай бұрын
I think it would have been a good idea to have all the wiring loom remote and battery box in the first issues of the build that way you receive some substantial parts in all the other issues or hopefully substantial parts sometimes you only receive tiny parts.
@thechids350
10 ай бұрын
Totally agree with you it’s nice to have something to build after a six week wait but I guess it’s also a good way to check it all before insulation
@rickgregory9616
10 ай бұрын
Its good we test all the electrics; but they could have bundled it into 2 Stages, with the remaining packs with parts to assemble onto the car. But that is one of the problems of a 2-year build. The Stages have to be stretched out. One thing I don't get is why extensions? Why not make the wires the length they need to be? Each extension = a breaking point. That said, think you'll add heat shrink to help keep the connections secure at time of install?
@AdamsAnglingTv
10 ай бұрын
cant wait to see when complete.. love the build an optimus prime fanhome
@milanondrak5564
10 ай бұрын
So you made a load of wires into a loom today. I'm guessing the producers felt that building the car was getting too black to bear so they felt like adding a bit of colour at this point of the build.
@matthewcoleman8267
10 ай бұрын
In this pack we'll be creating a tangled mess of wires that will annoy us for packs to come.
@eddywells5689
10 ай бұрын
Great vid
@anfieldroadlayoutintheloft5204
10 ай бұрын
Good video nice build thanks lee
@blackknight5690
10 ай бұрын
Hi Wayne das auto wird der hammer schönes video.
@steve1315
10 ай бұрын
A good test.
@TheModelGamer
10 ай бұрын
I like the idea of them doing all the wires BEFORE putting them into the vehicle, but holy crap, this is going to be a MESS of wires to store until then.
@stevenwheaton874
10 ай бұрын
At least up to this point, you know all the electrics are working.
@ZenStudiosCO
9 ай бұрын
I would much rather have electrics all at once and make sure they work instead of getting far down the road and finding out that something doesn't work. Especially with how these part works get more and more complex electrical dynamics. I love that they're evolving and getting more fun things to play with but I think it requires testing them all before installation.
@davidwestbury2328
10 ай бұрын
Love your Vincent you got it wall mounted now.. your getting great with the 3D printing
@robertgripton4499
10 ай бұрын
As I have written before this build is the same as the ironman build very little to do until near the end when you put big self contained sections together. But progress is progress. Loving the build as all ways. Stay safe all.
@naf821
10 ай бұрын
Challenge mode: complete the rest of the build now without unplugging any of the wires.
@Demiurge13
10 ай бұрын
wish i could do this one. Unfortunately I live in the U.S. ans hachette apparently doesn't ship here :(
@neilhaas
10 ай бұрын
🦇🦇🦇🦇🦇🦇❤❤😊😊😁🤗💯
@anthonyhutchings9214
10 ай бұрын
hello wayne, just can you tell me are all thease build models are sponsored or payed for by yourself. tony
@WorldofWayneUK
10 ай бұрын
It's about 50/50 on these. Some I pay for. Some I get but I don't get paid or anything to build them
@anthonyhutchings9214
10 ай бұрын
thanks
@callum_0903
9 ай бұрын
how did you store these wires wayne after testing? Did you take them apart and store into bags or something?
@WorldofWayneUK
9 ай бұрын
They are all in a storage box
@gamingwithjacobi8757
10 ай бұрын
When will you post Optimus prime pack 7?
@WorldofWayneUK
10 ай бұрын
Yep. I will do that this weekend
@gamingwithjacobi8757
10 ай бұрын
@@WorldofWayneUK cool, did mine when I got both 6 and 7 in the mail, my right hand is still not quite happy with me since I was using the provided screw drivers. Really need to buy a wow stick or something similar to that
@DavidDickens1
10 ай бұрын
Is anyone making a mains power pack?
@bedfordshiremodeller4491
10 ай бұрын
Yes Ian Campbell over at Partwork Upgrades
@STEDDY2379
10 ай бұрын
Is this model available in the US
@WorldofWayneUK
10 ай бұрын
Not at this time
@timevergreen3619
10 ай бұрын
No hahahaha
@lewishawkins7348
9 ай бұрын
Hi Wayne, can you give me the link to what wera screwdrivers you use and what cutting mat? Thanks. Lewis
@WorldofWayneUK
9 ай бұрын
They are all in my Amazon store. www.linktr.ee/worldofwayne
@lewishawkins7348
9 ай бұрын
@@WorldofWayneUK ok thanks👍
@user-mv3yz3cr5o
9 ай бұрын
i didnt get the wire for 31
@user-mv3yz3cr5o
9 ай бұрын
30
@The_Cold_Red
Ай бұрын
Did you have to use the remote tk try all the wires or is it everything connected to the board
@WorldofWayneUK
Ай бұрын
Everything is in the board
@The_Cold_Red
Ай бұрын
@WorldofWayneUK ohhhhh ok. Thank you so much. Love your vids Btw it's cool to be able to see what pieces I'm getting in future issues.
@stompingfreak8980
10 ай бұрын
Where did you get your Vincent from?
@WorldofWayneUK
10 ай бұрын
I 3D printed him
@stompingfreak8980
10 ай бұрын
@@WorldofWayneUK that’s amazing. Are your stl file free to download?
@WorldofWayneUK
9 ай бұрын
These aren't from me. Here is the link to the guy offering them www.patreon.com/ScifiProps@@stompingfreak8980
Пікірлер: 52