If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below and you can always come find me on social media via the links in the description. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne
@davidspencer8373
Жыл бұрын
Like video
@Sevarrius
27 күн бұрын
I know I'm a bit late to the party but I just received and started building my first pack. I had taken a look at your build series over the past year before ordering and I think it'll be invaluable for my own build, especially with sorting certain glaring inaccuracies. I know some people have been disappointed with the quality of the build and cancelled half way through but I still appreciate having the ability of owning a nearly 30", diecast, fully lighted, close enough to accurate model of the Enterprise-D. At least I won't have to paint, weather, place a thousands greeblies and add extra LED's+fibre optics(landing lights, docking bay doors and cockpit) to this one like I did with the Millennium Falcon. That was my first ever model and If I was able to finish that I think I'll be able to manage here. One thing I don't understand is why they included the saucer separation, it doesn't seem like there's an included way to display it as such and correct me if I'm wrong but you can't light the saucer whilst it's separated either? It just seems like it would add a point of structural weakness that could possibly cause saucer droop over time. If I was a cynical man I'd say that they added the feature just for the sake of saying they had another feature that most models don't without really thinking it through. I'll leave it as is but if it does cause problems I can see myself permanently screwing it into place.
@jimmyporter8941
Жыл бұрын
Hurray! I was missing this build. It has it's problems but nevertheless it was my favourite of your builds. Was gutted when EagleMoss failed and it stopped. Glad you decided to start over Wayne!
@denzel3888
Жыл бұрын
Fellow Wayne here. Ordered my 1st pack and will be following this channel.
@markparis95
9 ай бұрын
I'm loving this build, wished they did NCC1701A build. Great video from The World of Wayne very tutorial for beginners like me
@nigelvickers6496
Жыл бұрын
Absolutely spot on Wayne I hope you have better luck with this Enterprise D build than the last. ⭐️⭐️⭐️⭐️⭐️
@pichael64
Жыл бұрын
I am so happy to see you making this from start to finish following the magazine. It was your first run of this which introduced me to your amazing channel. Keep up the amazing work. Much Love.
@ziggythedrummer
Жыл бұрын
You know what would be awesome? Build the Jupiter Mining Corporation Red Dwarf!
@davidt8868
Жыл бұрын
Thank you for stating up the Enterprise D build again.
@StarTraveler649
Жыл бұрын
Glad you're starting over. Was loving the build before the problems.
@davidwestbury2328
11 ай бұрын
That’s a good idea using oil 😊
@robertgripton4499
Жыл бұрын
A very nice restart to this model. And with your previous model building skills you should be able to get a hopefully better build this time. Stay safe all.
@Arrobane
Жыл бұрын
Really happy to see you starting this back up. I held on to my original build, and resumed it as soon as it released from fanhome. I just finished adding issue 22 on Friday.
@jasontechlord
9 ай бұрын
I have completely given up on my after... the unpleasantness... I think I damaged a panel beyond finishing and just feel so burned over the situation. So I am glad you are doing yours so I can see how it should all look in the end.
@bakaneko718
Жыл бұрын
because of the rebuild... i am now ahead of you in one of these finally! all jokes aside i am looking forward to continuing and it's really awesome of you to start over for newer viewers. best of luck!
@Proximityillusions
Жыл бұрын
Oh, man! I loved that Q special effect at the beginning! Thanks for that! Don’t stop with the special Q effects.
@scottrandell4281
11 ай бұрын
Decided to do this one despite all the issues you and others had. I noticed that you connected the blue/red wire for B to left vent but my instructions indicate to use yellow/green of B. Then you connected yellow/green of B to front left where mine says to use yellow/green of A wire.
@WorldofWayneUK
11 ай бұрын
Yer. I don't think it matters. I just need to remember when it comes to connecting them
@jmorv8866
Жыл бұрын
Seems like Fanhome replicated some issues that Eaglemoss had with their design, such as that grille on the topside of the command section, where there was a lit grille that doesn't exist on the ship (should be black like its opposing grille). I also see that in order to do an accurate build of the ship, you have to incorporate those mods from before, such as the clear dome over the bridge and using that defunct LED light from the grille to light it up. It's nice to see this model getting a redo, and I may have to re-subscribe to finish mine!
@MattyThomas86
Жыл бұрын
Well It’s the same design, they have done nothing to change it
@JuffoWup78
Жыл бұрын
According to fanhome's site, it will have all the issues associated with the eaglemoss version as they buight up eaglemoss's inventory and reissuing it. Any manufacturing issues from the eaglemoss version are still present. Will still resubscribe to finish mine as well, but hopefully in the future we'll see fanhome revisit the model for a 2.0 version. I believe the off color problem on the nacelles will also exist. If my memory serves me right to that being a problem.
@dennisdean7366
10 ай бұрын
The front end of the nacelle is called Bussard collecter.
@rflester53
Жыл бұрын
I've received two shipments from the re-start from Fanhome, just finished Issue 15, finishing off the upper saucer and starting the lower side. Surprised the hell out of me when all the lights on the upper side lit up like they were supposed to! I'm doing the UV resin mod for the windows, looks MUCH better than the individual clear and black plastic windows.
@k.fegleyvipergtsr20
Жыл бұрын
glad to see u doing the enterprise again
@davidwestbury2328
11 ай бұрын
I just finished the stages had the same problem when I didn’t over tight.. couple of screws going round and round. I did use 1 cm that worked instead of ap..
@deeharris1908
Жыл бұрын
Glad 2 see this bk, good job m8
@richardstevens3625
Жыл бұрын
I remember watching your first release of these videos. And you been infront of myself by 10 magazine's. Irony I'm now 10 infront of you. But I still do love this ship despite its flaws. And can see the changes you have made in your presentation of the new version of videos.
@rizz917
11 ай бұрын
Just ordered this kit/subscription. Will reference your videos. Glad you shared. 👍🏻
@ragemalachi
10 ай бұрын
I am glad to be continuing this build, warts and all. however, I didn't get the corrected orange bussard part with issue 12 that people who were on that stage before fanhome took over got. so even though I wasnt going to paint anything, outside of blacking out some parts to fight light bleed, but now I think I may have to repaint those orange parts.
@mrbluesky2050
Жыл бұрын
going to enjoy this build, missed the first one...
@steve1315
Жыл бұрын
Good to see 👀👀 this back ,let's hope it gets finished👍👍
@user-rl2gj2rw7f
Жыл бұрын
I work in the aviation industry and our big problem is getting hard to get screws ( stripped out or nearly stripped) out of aircraft panels. We have a compound we use that's a bit on the expensive side. It can be used to install screws without stripping out the head of the screw, just put a little of this on the tip of your screwdriver and it creates an incredible grip no matter what type of screwdriver, even with the poor screwdriver that comes with this step. The paste is Clover compound Grade D - 180 grit. Been using it on my model build.
@robertduball4605
10 ай бұрын
Value grinding compound
@KlingonCaptain
10 ай бұрын
After getting about halfway through stage one I paused because I have 100% decided that I will be gluing plastic parts (windows and such). I just don't like how easy it is to push on the plastic pieces and make them move after they've been screwed in place.
@rickfranz6072
Жыл бұрын
So happy you are redoing this with Fanhome. Enjoyed getting to meet you at Wonderfest this summer. Keep up the good work.
@WorldofWayneUK
Жыл бұрын
Thanks Rick. I'm looking forward to be back there next year
@markquinn1104
Жыл бұрын
Looks better than the last one
@deutgi
Жыл бұрын
I hate being a student and having no money...I want to build this so badly! I'll settle for watching your videos and pretending I'm building it until I win the lottery :P I hope this one goes well!
@spritemon98
11 ай бұрын
I love this eaglemoss set
@robertevans8126
Жыл бұрын
Well, Mr. Wayne, I thought you did a nice job of this first build, so please continue, until its all built? It is a very large kit, with all of the lights ... not sure how much yet, but just to have one of these! Bob from San Francisco, Ca USA
@shanehills2698
Жыл бұрын
Wow. That's going to be a big model. Look's brilliant too. I like!!
@RingLordSonic
7 ай бұрын
I wish this was available in Australia. Looks partly inaccurate but il would still get it. So I’ve decided to make that same ship out of lego :)
@thethompsonmodelshop
9 ай бұрын
I’m glad to see you starting from the beginning again. It was your channel that got me interested in building this particular model and staying to its original instead of drilling the holes and putting resin and all that so then I made my own channel to promote the build because I missed your videos, if you would like you can stop by my channel the Thompson model shop
@shanehills2698
Жыл бұрын
Thanks!
@WorldofWayneUK
Жыл бұрын
Thank you so much Shane
@brianmcdonald3831
Жыл бұрын
I got pack 22 Saturday just starting to put together lower portion of battle section
@jacobkrug
Жыл бұрын
awesome build
@AirwolfCrazy
Жыл бұрын
I miss the Q power effects. I know ypu want to build this basically stock but the painting you did on the warp nacelles was great.
@williamd1732
Жыл бұрын
I'm having serious Deja vue here lol. I'll just bet you're looking forward to all of those pesky escape pods again. 😉
@WorldofWayneUK
Жыл бұрын
Oh yes lol
@jimlight5137
11 ай бұрын
I cannot finish this build anymore due to my circumstances changing. If anyone in the comments wants to pick up where I left off I’d be more than happy to sell what I’ve got at a discounted price. I made it to stage 21 before they went out of business.
@ritahamblin1043
Жыл бұрын
I have to say I am impressed and if it wasn't for the fact I've run out of area space in my home. I would be very tempted to buy the one space I have is for the thunderbird 2 when I find one ready built as you know sadly the one you did is not available anymore but I will watch this. You never know I might win the lotto 😂😂😂😂😂😂😂😂
@user-mu8ee4he7o
Жыл бұрын
I'm so happy to see you are building it again I can't believe they kept clear on one side are you not going to paint gray and side ports red
@WorldofWayneUK
Жыл бұрын
It all needs painting
@davidspencer8373
Жыл бұрын
Like video
@meeshker
Жыл бұрын
Probably a good idea to make all first section videos, thinking, it is a persons first build.
@DarkestVampire92
Жыл бұрын
Anyone else feel like its Groundhog Day? I feel like we've been here before... lol So far it doesnt look like they made any improvements to the model, either. Still an absolute mess of wires on PCBs.
@seeyouintheeighties
10 ай бұрын
still trying to find a model kit that more closely resembles the 4t studio model (in particular the deflector dish area) as used in filming the later series of the TNG episodes and the odyssey battle in ds9 where you see it more clearly. I haven't found a single model kit that accurately reproduces this.
@WorldofWayneUK
10 ай бұрын
I'm thinking this is what your looking for. It's quite costly but a pretty amazing model . www.heliosml.com/galery/enterprise-ncc-1701-d
@tonyansill3093
Жыл бұрын
I was hoping fanhome was going to do some improvements to the model before re-releasing this build.
@davidwestbury2328
11 ай бұрын
It’s Buzzard Collectors Wayne not Bozzard 😂😂
@cryofpaine
Жыл бұрын
Do you still have your Eaglemoss one? How do you feel this compares, is there any difference, or are they basically the same? Or is it too early to tell? I know EM had some issues with things like seam gaps.
@WorldofWayneUK
Жыл бұрын
I dk t have it anymore but these are exactly the same model
@robertevans8126
Жыл бұрын
Hopefully you will have fewer or no problems with this huge kit? I have been following this kit for some time now ...
@WorldofWayneUK
Жыл бұрын
This kit is riddled with problems
@MegaSavonarola
Жыл бұрын
I stop my subscription with Eaglemoss because of all the problems and the way over the top lighting light leaks has Fanhome made any changes to or is this just a continuation of the Eaglemoss build with the old Eaglemoss inventory
@markbelsom3174
Жыл бұрын
I'm really surprised you're building the Enterprise D again after last time.
@Conn653
Жыл бұрын
Are you starting another "D"? I was able to pick-up, with Fanhome, where Eaglemoss left off. Helping Hands are an invaluable tool for working on small stuff. I get mine from Harbor Freight. These work great with my N-Scale trains (:160) 🙂
@outsider238
Жыл бұрын
Wishing you the best of luck with this. You know how I feel about this thing. I see they didn't fix the vent that's not supposed to light up and they still have the wrong color of that band near the bussard collector which should be yellow not orange. I'm still curious how the saucer connects to the neck.
@robertdexter1045
Жыл бұрын
When Fanhome took over this build from EM, I am pretty sure nothing changed in the parts that had already been cast... as far as the front grill "orange" one I believe that in a future issue they send a replacement part that is yellow, i cant remember i ended up keeping the original copper one, but will probably have to get a replacement part for it later. Thnx Wayne for starting this up again, i remember in one of your live streams that you were still on the fence about starting this one again. It will be jice to finally see this one completed after 120 stages.
@outsider238
Жыл бұрын
@@robertdexter1045 The original release had that piece as copper and then they sent us the orange one as a replacement which was still the wrong color. I just want to see one of these things completely built without modifications (which for more than $2,000 shouldn't need any mods) to see what it ends up looking like.
@willnew6770
Жыл бұрын
Did you check the lights are in the right place, think you took one from the vent to the forward deck?
@WorldofWayneUK
Жыл бұрын
I will recheck
@Funky-monkey79
Жыл бұрын
This is a dream build of mine, I grew up watching the series with my dad and would love to do this, however I am a perfectionist and the raised edge on the top of the saucer section where it meets the Stardrive section is stopping me from subscribing to the build. Any thoughts on this, other than me being extremely picky lol.
@WorldofWayneUK
Жыл бұрын
I'm just going to build and see myself. I know a lot of things get pulled in as the bottom panels go on
@jbaldwin1970
Жыл бұрын
How many issues is this? I can’t see from the website. It says each ‘package’ contains several stages but doesn’t say how many packages there are, unless I’m missing it. I went to the site and saw the millennium falcon is about to be released so…
@WorldofWayneUK
Жыл бұрын
120 stages. Roughly 30 packs
@johntreloar8203
Жыл бұрын
Nice one Wayne, did they fix the light bleed problems?
@WorldofWayneUK
Жыл бұрын
No but I will look at that as I go through the build
@zakbradley1295
9 ай бұрын
I’m confused, is FanHome picking up where Eaglemoss left off, or is this a totally new build?
@WorldofWayneUK
9 ай бұрын
Both
@Rturn2609
Жыл бұрын
So with you not going to carry on, to now taking it up again, along with build as is. Is the video backed by Fanhome? Meaning the known issues that definitely haven’t been addressed will just be there
@WorldofWayneUK
Жыл бұрын
This is the exact same model. Last time I attempted this I forgot that peeps would be following along with me a d I.left them in the lurch. That didn't sit right with me so I am rectifying that mistake
@nickbalmer1247
Жыл бұрын
With mine, when it comes to the individual windows I used clear super glue for the clear windows and black super glue for the black windows, it cut out most of the light bleed
@BlaineChadwick
11 ай бұрын
Hey Wayne, glad to see you starting over. I watched your first build and started it myself until EagleMoss stopped. I have picked up from where i left off with Fanhpme at stage 56. Just waiting for the subscription to start. Are you going to be using the lifeboat transfers on this build? good Luck! I'll be following along for an insider tips. I also started the Millennium Falcon build, 1st packs arrived last week.
@WorldofWayneUK
11 ай бұрын
No. They look great but I found they come off really easily
@manuelkress8554
Жыл бұрын
Will you also do the mods you have done to the previous Enterprise D like that blinking light on the bridge section, the copper paintjob on the nacelle grills or that transfer sheets for the escape pods?
@WorldofWayneUK
Жыл бұрын
No. I'm strictly making this one as stock. You may see videos later of me doing some stuff to it lol
@ultramaximusreviews
Жыл бұрын
So did they pick up the design for the Eaglemoss model or is it a totally new one? You should do a comparison. Did you see my tweet to build a custom dry dock with the old unfinished model with the Enterprise under construction? I think that would be an awesome series.
@WorldofWayneUK
Жыл бұрын
Yep lol. It's the same model. I don't actually have the old.one anymore so this is my do over
@TimTweddell
Жыл бұрын
Are the instructions on line. I have just decided to build the Enterprise. My first pack should be here soon.
@WorldofWayneUK
Жыл бұрын
Yep. On your Fanhome subscription page and also mypartworks website
@sollabe
Жыл бұрын
So glad to see you starting this build (AGAIN). Glad they finally came back. Are you building from new packs or is this the old packs deconstructed? I think I saw the magazine still said Hero Collector, so that begs the question did Fan Home make any adjustments or corrections to the build (we know there were some coloring mistakes before with the nav light on the engine and the EM field piece)? Still think the individual windows are a bit silly. Don’t know why they didn’t do solid acrylic pieces like we had seen on the neck previously and here in the bridge section. I know the goal is to show how to build it “as intended” but I know you had made some pretty good progress on making the UV resin windows, and that seemed somewhat easier then the time consuming window placement. Was there any thought of going back to that method? Do you plan on customizing again as you go (the copper grills, beacon light, escape pod detail stickers, etc)? Anywho, great to see some Enterprise D. I look forward to this build and glad I caught up on the old videos once you provided them to me! Keep up the great work Wayne!
@WorldofWayneUK
Жыл бұрын
Nomim going to be building this as stock and following the magazines so viewers can follow along. I'm starting from scratch
@garywatson8602
Жыл бұрын
I got the 200 ML size bottles as you suggested hope thats the right size ? And where did you get that cool shirt ?
@WorldofWayneUK
Жыл бұрын
Ive hadn't for years. Some.coslay place online from what I remember
@chrisjubb-hearnborough
Жыл бұрын
Glad to see this back after the problems you had with the previous. Are you doing it fully vanilla or putting on any mods?
@WorldofWayneUK
Жыл бұрын
This will be vanilla
@stevea8875
Жыл бұрын
So does this mean you are not resuming your previous build of this when you originally started it, with your customisation of it as you were doing it? I've noticed the playlist for the previous Build the Ent-D model is gone.....?
@WorldofWayneUK
Жыл бұрын
No. The idea I had just wouldn't work as the frame blocks the light
@stevenwheaton874
Жыл бұрын
Wayne, is this a reboot of your Enterprise D project? If I recall, you were tried building this before. Am I correct?
@WorldofWayneUK
Жыл бұрын
This is me starting over from scratch building just as the instructions tell us too. I was trying to mod the previous one but the single light idea wasn't going to work
@stevenwheaton874
Жыл бұрын
That's cool. It's good to see you building the Enterprise D again. I was wondering what happened to the other build.
@cornwallkev201
Жыл бұрын
Wayne, to me its like you have done a time warp back in time starting this again. Will you be doing all the mods like you did on the other one?
@WorldofWayneUK
Жыл бұрын
No this will be strictly vanilla
@squigglytiger4796
Жыл бұрын
I was looking forward to seeing you carry on where you left off, not start again.
@WorldofWayneUK
Жыл бұрын
It was a lost cause as the way I wanted to light it wouldn't have worked. The frame intersects the windows and there is now way to light the other side of it
@skipsmessyworkbench
11 ай бұрын
Where did you get that Robbie the Robot I see on your bench? Is he still available? So very cool!
@WorldofWayneUK
11 ай бұрын
It's actually just a toy from Amazon
@Driver0378
Жыл бұрын
Great to see the D back, but is this just a re-release from E.M? Did they fix up the light leaks and simplify the wiring monstrosity? Plus are you going to be doing your UV window mod? That was awesome and looked so much better on the other one! 😊
@robertdexter1045
Жыл бұрын
As far as the light leaks, I would say no that issue has not been fixed since Fanhome has not modified tje build in any way.
@sprueVerse
Жыл бұрын
It’s Groundhog Day at WOW! 😂
@WorldofWayneUK
Жыл бұрын
With this and the Delorean I feel like I have gone back to 2016
@jfrFK28ST01fan
Жыл бұрын
Great video again!! Is this a complete do-over then? Not sure if I have mentioned this before during your old build is that I wish the windows were molded onto the reflector panel. After each saucer panel was completed and tested to determine if there is a light leak at the blackened windows. Still would put the individual escape hatches in as before. Are you still going to use Mike Lane’s accurate escape hatch transfers or vinyl stickers? Is the amber colored piece between the Bussard Collector and Warp Grilles the corrected piece? I am not sure what I should do with my Enterprise D build. The two battery compartments don’t work anymore, got a broken wire for the Nacelle and a cracked panel (original during the build and replacement). Think I may start over with it when I am either halfway or three quarters of the way through the BTTF DeLorean.
@WorldofWayneUK
Жыл бұрын
Yep. A complete do over
@MadMurdoc78
Жыл бұрын
Will you be continuing your modified build also? And will new builders be made aware of some of the problems we’ve encountered up until now (during the time it was an eaglemoss product)?
@WorldofWayneUK
Жыл бұрын
No. I turned out what I wanted to do would not work
@michaelhazlitt7041
Жыл бұрын
I was really hoping to see the continuation of your previous enterprise D not a complete do over
@TheDog8873
Жыл бұрын
Is this rebuild of the one you already started or the fanhome one from scratch Wayne?
@WorldofWayneUK
Жыл бұрын
Fanhome one from scratch
@TheDog8873
Жыл бұрын
@@WorldofWayneUK do you think there will be any noticeable upgrades or changes? I remember you talking about terrible light bleed on the saucer section at one point
@WorldofWayneUK
Жыл бұрын
@@TheDog8873 nope it's the exact same model
@TheDog8873
Жыл бұрын
@@WorldofWayneUK shame, common sense says a second bite of the cherry would be the perfect opportunity to iron out the creases
@fmunzar24
11 ай бұрын
I would like to continue from issue 13, unfortunately fanhome cannot or does not want to send it to the Czech Republic
@WorldofWayneUK
11 ай бұрын
I wonder if they will expand
@fmunzar24
11 ай бұрын
@@WorldofWayneUK I try to annoy them every month, but if there are few of us in the Czech Republic who haven't finished it, then I probably don't have a chance to finish Enterprise
@rickgregory9616
Жыл бұрын
Surprised you didn't apply, or mention Mike Lanes Lifeboat transfers. And are you going to improve the lightning of the Nacelles?
@WorldofWayneUK
Жыл бұрын
Nope. I'm building this strictly as stock
@christianhentschel8628
2 ай бұрын
9 month since the last video. Are you still building this model or did you gave it up? I watched your first build befor eaglemoss went under. I wanted to bild it myself. But do to some lets say frustrating times i never started. Now that i have the time, the money and the space i wanted to build it. But no new videos to this build. Is it that bad? Or why did you stopped?
@WorldofWayneUK
2 ай бұрын
Lol. Next vid is out Friday
@uphighballer
Жыл бұрын
is this worth a redo or continue from where we left off?
@WorldofWayneUK
Жыл бұрын
I'm redoing it as I don't have the original anymore
@stevensandiford6994
Жыл бұрын
I thought you were doing your own build on this? Are you going by the magizines again now?
@WorldofWayneUK
Жыл бұрын
Yes
@marcblackburn5920
Жыл бұрын
Can you point out the similarities and differences between this and the other Enterprise you were doing?
@WorldofWayneUK
Жыл бұрын
They are exactly the same
@davesmith1235
Жыл бұрын
what oil do use to help the screws?
@WorldofWayneUK
Жыл бұрын
Just a regular 3 in 1 oil
@davesmith1235
Жыл бұрын
thanks. look forward to the next instalment. hope you get to finish it this time
@garyrichards6079
Жыл бұрын
So Basically Fanhome haven't addressed any of the issues that the Eaglemoss build had ???
@WorldofWayneUK
Жыл бұрын
This is the same model
@garyrichards6079
Жыл бұрын
@@WorldofWayneUK Are you gonna build as is ? Or you gonna mod it like you planned with the EM model ?
@WorldofWayneUK
Жыл бұрын
@@garyrichards6079 as is. The mods I was going to do won't work
@craigdollars8333
Жыл бұрын
Them windows put me off still
@jbaldwin1970
Жыл бұрын
Order the Mac version instead 🤓
@ListerDavid
Жыл бұрын
It’s cool your restarting this with Fanhome now but what happened to the Enterprise that you was already doing?
@WorldofWayneUK
Жыл бұрын
Gave it away
@mariokrug6382
Жыл бұрын
Hallo my Dear, do you upgrade this Lady too?
@wobber999
Жыл бұрын
Why couldn't you continue the other build Wayne or is this a more superior model than the last one as it had flaws ?
@WorldofWayneUK
Жыл бұрын
I attempted a mod that didn't work and effectively I destroyed the build
@wobber999
Жыл бұрын
@@WorldofWayneUK Oh jeez wayne I bet you were devastated, sorry about that mate.
@OanKnight
Жыл бұрын
Is this the eaglemoss kit that evaporated into thin air a year or so ago?
@WorldofWayneUK
Жыл бұрын
Yes
@OanKnight
Жыл бұрын
@@WorldofWayneUK So did they change anything, or can I basically skip the first 22 odd parts I already had assembled which would be immensely helpful. I'd built the saucer section previously, more or less. With your guides, funnily enough.
@WorldofWayneUK
Жыл бұрын
@@OanKnight nope. Its all the same
@OanKnight
Жыл бұрын
@@WorldofWayneUK That is actually probably the best news I've had all year. Thanks wayne!
@brucebouton4231
Жыл бұрын
What happened to your first build of the Enterprise-D? Weren't you modding it?
@WorldofWayneUK
Жыл бұрын
Yep. It didn't work out as I had planned
@xanderdixon3688
Жыл бұрын
R u still building the other one Wayne
@WorldofWayneUK
Жыл бұрын
The refit? Yep
@GeoffreyToday
Жыл бұрын
I really want to subscribe, but it seems they don't have an option for Canada :\
@WorldofWayneUK
Жыл бұрын
Canada is always forgotten for some reason
@GeoffreyToday
Жыл бұрын
@@WorldofWayneUK Too true, and it's such a bummer. I contacted them to ask, and sure enough, not available in Canada. What's funny though is their website can detect that I'm from Canada, and goes so far as to ask me if I'd like to switch to the appropriate site for my country, despite it not being an option :p And of course I've been getting constant junkmail from them ever since to "complete" my order, since I was part way through signing up before discovering there was no option for Canada. Seems they really want me to subscribe, they just don't want to have to send me the parts :p
@shaunsheldon5580
Жыл бұрын
I still fancy doing this but is £1300± really worth it so expensive
Пікірлер: 219