bro you just saved my build! I was trying to figure out why my knocker was light striking when I had my full auto disconnector in, and I had just taken out some of the washers in my hammer regulator. I had just about given up until now lol
@ValiantAirsoft
Жыл бұрын
Yes!
@TheDeeMoe
Жыл бұрын
Solid video bro!!!
@ValiantAirsoft
Жыл бұрын
Appreciate you
@Its_Tempesta1757
Жыл бұрын
@@ValiantAirsoft just looked this up to see deemoe also dropped a comment 😂, good stuff man
@Its_Tempesta1757
Жыл бұрын
Big fan bro 💯
@AsherBurroughs
Жыл бұрын
How much was everything about
@reptileguy857
6 ай бұрын
Bro that Hi Capa is so snappy🤯
@warwolveairsoft
Жыл бұрын
Beautiful build, love LA Capa Customs.
@ValiantAirsoft
Жыл бұрын
Glad you like them!
@pandaplayz2141
8 ай бұрын
I used to, but they never have anything in stock lol its kind of ridiculous. I've been on the notify me list for 6 different parts and haven't seen anything for about 7 months now lmao
@warwolveairsoft
8 ай бұрын
@@pandaplayz2141 Same here, I can never find everything for one complete build unless I want it to look like a clown pew. Hopefully they start stocking up again.
@pandaplayz2141
8 ай бұрын
@@warwolveairsoft Yeah for sure, I've found some of the parts I needed on Evike so I've been trying to piece things together.
@fugudacat
Жыл бұрын
I have always wanted to make a video like this but I figure it would be a few hours long explaining all the tolerance issues, tuning and such that are actually required to build a hicapa!
@ValiantAirsoft
Жыл бұрын
Keep it as simple as you can
@CZGamingTV
Жыл бұрын
@@ValiantAirsoft hi i would probably build one too how much did this build cost??? everything included i mean :D
@menaceskitz27
Жыл бұрын
@@CZGamingTVfrom my educated guess, nearly 1k frame is about 250 on its own, slide is about 120. Depending on other major parts (including the base hicapa) it's gonna be about 1000 easily
@catmousefin
Жыл бұрын
Beautiful build! You forgot to put the other barrel stabiliser on the outer barrel, you put one in the barrel and one on on the other end and sits behind the threads i believe, Im planning on making a hi capa with the jungle cat slide and La capa barrel and you’ve just confirmed that 😂 I love how it all came together in the end. Keep it up 👍
@ValiantAirsoft
Жыл бұрын
I've been doing that for a long time I didn't know it was specifically for it at the time lol.
@1dafullgaming688
Жыл бұрын
What timecode?
@hughwilson2876
Ай бұрын
@@1dafullgaming688 31:30 I think
@dudebroski9460
Жыл бұрын
Bro. As a gunsmith and a guy who builds airsoft guns for fun. It is super bad to drop the hammer without the slide in. If you are gonna do that you should put your finger on the other side to keep it from bending the frame. Same goes for real steel 1911 and 2011s and many other pistols too
@chevvyGibbs75
9 ай бұрын
Hats come off dude thank you for your awesome content much appreciated 👏 and happy new years valiant Airsoft
@starkillermarex
Жыл бұрын
I heavily recomend lubing your outter barrel. Especially if it's been custom painted. Your paintjob will survive a bit longer and your slide will travel better
@ValiantAirsoft
Жыл бұрын
It wears because of the original Tokyo marui design that made its way into current parts. There are interlocking lugs on the outer barrel and on the inside of the slide that run during action. On the TM, it didn't matter because they were plastic. Lube will not save you from the wear.
@ratchbrg3882
Жыл бұрын
While I detest speedsoft builds, this was informative on troubleshooting my KA(TM Comp) 1911. I have used some gheto shims(screw with a few M3 washers on it) to give more tension to the Hammer spring. I also ordered some 130% Nozzle springs. it's not fully cycling and loading a new round. someone suggested its a power issue and someone else suggested stronger nozzle springs. I should get a little more power with the "shimmed" hammer spring and the nozzle shouldn't get stuck in the hop unit with the better spring.
@ThePirateNYC
Жыл бұрын
have amazing day for you buddy God bless you
@hakarikinji3777
Жыл бұрын
1st Shout out from PH 🇵🇭
@andersonkuy9337
Жыл бұрын
i still don't understand how hes building a gun. i tried and never accomplished I had to sell my parts, you did great.
@Rush-One
Жыл бұрын
Building is not my specialty, and I feel ignorant because I have no idea what anyone is talking about when it comes to parts. Thanks for making this vid, is helps.
@matanuigaming2556
Жыл бұрын
You actually built your own Airsoft gun, THAT IS AMAZING!!!!
@Helloo6462
Жыл бұрын
Are you knew to airsoft?
@matanuigaming2556
Жыл бұрын
No, I've seen Airsoft. Also you'd misspelled "New".
@Helloo6462
Жыл бұрын
@@matanuigaming2556 oh my bad on the spelling
@ЖЮЖ
Жыл бұрын
It’s still a high capa base but not it’s own gun
@Stinky0368
11 ай бұрын
@@matanuigaming2556 tap there name then you can @ them
@rbpdaddyqb8895
Жыл бұрын
Nice build ❤
@ValiantAirsoft
Жыл бұрын
Thank you
@StraightUnderFireReviews
Жыл бұрын
Gun grease or thicker oil helps hold springs and other micro parts from being lost and keeps it in place… sometimes 😂😂
@DelvionWalter
3 ай бұрын
Can I have that one for my birthday please I’ve been wanting this for my whole life
@Sebastian-iz8ei
27 күн бұрын
Not gonna happen
@rmgairsoft1286
Жыл бұрын
Watching from taiwan...a filipino airsofter here.
@MTG9745
11 ай бұрын
12:09 I can't imagine how much of a headache it would be if the grip safety wasn't working properly and the pin was already in
@BananaChip1
Жыл бұрын
i saw the thumbnail, and decided that after i watch this video, im making one of these beauties.
@BananaChip1
Жыл бұрын
i just need a budget build.... which is a fantastic video idea!!
@ColossalKaiju
9 ай бұрын
God DAMN that is BEAUTIFUL
@sony0515tw
Жыл бұрын
Total costs ? Please😮
@swifty7827
11 ай бұрын
Once when I get money, I’m getting parts from armsaholic to make a custom marui John Wick Pit Vioer just how it looks in the movie. Thankfully I found this video to help me
@BLCKVPER
Жыл бұрын
I really would love to customize my Hi capa with a custom Slide. But the Problem is, theyre literally sold out everywhere. And the few i found are unable to ship to my country.
@MaxSmith-e4k
9 ай бұрын
Nice buiild, after Christmas, time allowing, I will try a build,
@petehairlive7045
Жыл бұрын
Love your content bro keep it up :)
@ValiantAirsoft
Жыл бұрын
Appreciate it!
@sektorstudiosftw
11 ай бұрын
This is true art
@Just_Tropical
Жыл бұрын
Bro just built a whole high capa gun like it’s freaking Legos
@ValiantAirsoft
Жыл бұрын
LOL
@Just_Tropical
Жыл бұрын
No really you’re talented
@ryu-yuta9259
Жыл бұрын
Viton orings/green orings might be better to use :).
@walkingintheglory2892
Жыл бұрын
lovd these thanks man
@CodeREDBacardi
Жыл бұрын
Sick build! 🔥
@deeayy6356
Жыл бұрын
How much did it all cost?
@theiaraine
Жыл бұрын
looks badass. good job
@normanvanveenendaal647
Жыл бұрын
The First gbb i want to buy is a TM hi capa 5.1 *-*
@toskhei3073
Жыл бұрын
ima totaly try this when i can aford it. rn can only aford springers or used guns
@tanneranderson667
Жыл бұрын
Is there a way you can get the people at LA CAPA CUSTOMS to build it for you?
@ValiantAirsoft
Жыл бұрын
lacapacustoms.com/custom-builder/ref/valiant
@BenDumont-ct9ke
11 ай бұрын
Great build
@Mrmhibbert
Жыл бұрын
Threadlock not Loctite... One of my pet peeves as an engineer. Loctite is a brand and also make superglue, grease and other things
@arctic_flipstff8992
8 ай бұрын
Lets hope i can get this new job so i can finally get a good airsoft gun
@jackiverse2669
Жыл бұрын
How much does this cost
@Stylinugly
Жыл бұрын
That’s a dope build. Personally, Im working on an Aap-01 build, and a 9mm Sbr by King arms build.
@Stylinugly
Жыл бұрын
I know you didn’t ask, but I’m just excited about it
@BloonMasterAlch
Жыл бұрын
Cool, good lucki!
@Trueno-Pyro
Жыл бұрын
How much did it all costs?
@abyloza4951
Жыл бұрын
I wanna build one but half the stuff you mentioned I have no idea what they are or how to determine which ones would be best for me, if I ever I meet you in person I’m about to pick your brain about it lol
@m1ndl3ssgaming
4 ай бұрын
@ValiantAirsoft how much would you say you spend on all those parts im curious cause i wanna build my own
@Mister.Menace
Жыл бұрын
Well done sir
@quinton7854
Жыл бұрын
great info especially on the detent thing, i hate that and have lost my spring now i cant move my safety nor remove it so annoying.... also why is the 4.3 frame longer then the 5.1, i have a 5.1 and its longer then the 4.3
@ValiantAirsoft
Жыл бұрын
The competition frame is 3.9" length
@mikeoutlaw8
10 ай бұрын
as guy who owns real guns... kinda surprised how similar a lot of the parts to this are similar to a 2011. if you know you know, but i can respect it
@pinarrioqwer2933
Жыл бұрын
Min 32 that o ring is going to disturb you
@ValiantAirsoft
Жыл бұрын
Nope works great
@gablava9099
Жыл бұрын
The 1911 is the ultimate template pistol
@Tropveq
Ай бұрын
How much did it cost?
@dreadnaut0155
10 ай бұрын
could you elaborate in the Airsoft Masterpiece trigger bar? What advantages would I get from adjusting it? Is it much of a difference from the LA CAPA trigger bar?
@GHOSTPAYNE
10 ай бұрын
Amazing build but I’m just wondering how much was the gun and all these parts could you let me know please👍
@daijonhawthorne2190
9 ай бұрын
1500 it’s how much I spent on mines and I have less parts lol
@GHOSTPAYNE
9 ай бұрын
Nice I started upgrading my hi capa and including the gun. I think I’m about 900 bucks right now.
@Airsoftlover-ob3qb
Жыл бұрын
Can you send me the pistol the hi- Capa 4.3 because I don’t know which one to get
@jacobmorales817
10 ай бұрын
Make a collection video
@MrRibeiro89
9 ай бұрын
Awesome video and even better Hi-Capa!!! Is it possivel to use as a base the model Tokyo Marui Hi-capa 5.1 Government edition, to this kind of build??
@spikejumper4096
9 ай бұрын
Whats thr difference between airsoft and speedsoft?
@ValiantAirsoft
9 ай бұрын
Speedsoft is a tournament style of airsoft
@alphadogzairsoftfamily7245
Жыл бұрын
Awsome brother
@SHD_Agent6514
7 ай бұрын
Is it more expensive to buy a pre-built hi capa or get a base and upgrade it yourself with all the parts
@lachlanjohnfishing7325
8 ай бұрын
Do these parts also work in gel soft guns
@chantaiman8171
Жыл бұрын
Perfect video for the airsoft community 👍🏻👍🏻👍🏻
@L4M3ST
Жыл бұрын
What is the grand total price for all this
@pistazieneis415
6 ай бұрын
all from scratch it can cost from $ 400 to +$1.000 easily
@gastis4689
7 ай бұрын
me forgetting to turn down the volume after this video and getting my ear bombed
@TheFateLessOne
Жыл бұрын
Thought this build.might be a little over the top for my taste but it's actually sick. Good shit man! I bet that was a good chunk of change lol.
@ValiantAirsoft
Жыл бұрын
A few chunks
@TheFateLessOne
Жыл бұрын
@@ValiantAirsoft LoL. I just got into airsoft myself a few months back and I've already spent a few chunks myself. I like buying and working on the guns more than using them.
@LeagueCritic
Жыл бұрын
my hammer doesnt go all the way back up idk if the old owner put a disconnect?
@ValiantAirsoft
Жыл бұрын
sear spring is probably out of place
@pauls.5815
5 ай бұрын
Does your thumb actually reach the thumb rest? Seems too far away.
@stackraxrelax-_-7046
9 ай бұрын
What's that frame you got
@carissacoburn893
11 ай бұрын
Can you do a glock 18c airsoft
@Arbigale
Жыл бұрын
Is it better buying them individually vs buying a TM unit?
@ValiantAirsoft
Жыл бұрын
If you're going from the ground up all in one shot it makes sense to buy everything separate, but 99% of people are better off buying a TM base and building off the grip/frame
@discipline2escape.official
Жыл бұрын
is it better and cheaper to build your own gun or is it better to buy an already built one?
@ValiantAirsoft
Жыл бұрын
If you don't know how to build, then prebuilt is the way to go until you are accustomed to the function
@CheekiDavey
Жыл бұрын
does the hammer spring/back strap have already those little things in it and put the spring and the plunger in or ot
@vaoqy
Жыл бұрын
How much would something like this cost?
@ValiantAirsoft
Жыл бұрын
This would be $12-1400 depending what you did exactly.
@vaoqy
Жыл бұрын
@@ValiantAirsoft WTF
@Nobile013
Жыл бұрын
Hey Ik this is a bit off topic but what’s a good suppressor for a 1911 A1
@quickstroke42
6 ай бұрын
Love the video. I have a question. I have the same slide you have here, but I have an airsoft masterpiece limcat advanced frame. I didn't have to fit the slide to the frame like you did in this video. It also has the tiniest bit of wobble. My question is: is that ok? Does it need to be super tight?
@ValiantAirsoft
6 ай бұрын
no that's ok
@Mrmhibbert
Жыл бұрын
I can't stand the Waldo nozzle spring.. I've chewed through so many it's unreal. I ended up switching to the aip 140% and never chewed one up since
@n8taing612
Жыл бұрын
33:09 you said upgrading to a 150% for a stock slide will make it last longer, wouldn't that do the opposite by putting more stress on the slide?
@ValiantAirsoft
Жыл бұрын
Higher spring = less recoil = less impact at the end of travel = less wear imo
@FireHawk9463
7 ай бұрын
What would be the best online sight to buy hi capa parts?
@labirint_0
12 күн бұрын
where and how to buy such a set
@davytalairsoft
Жыл бұрын
Necesito una así para mi FNX-45
@YTSS_SAVAGE_XD
Жыл бұрын
yo u dound like danny laruso from kobra ki
@ValiantAirsoft
Жыл бұрын
Is that good or bad lmao
@ironkam9424
Жыл бұрын
how much did that all cost? to add all the aftermartket parts?
@idkwhatnametouse4510
Жыл бұрын
i lost my thumb safety spring so had to gget new one 😭😭
@marcelloventuri8898
Жыл бұрын
Here we are...even softair like game and all other stuff made between 1990/2020 a a fucking run for nothing,speed run...that's the goal of new generation,speed up everything and forget to enjoy the basic
@eyalnoi_123
6 ай бұрын
I want to do it how much does it cost ?
@courtneylapp2402
Жыл бұрын
Can you start completely from scratch or do you have to start out with a base gun
@ValiantAirsoft
Жыл бұрын
Both
@PTR2K
Жыл бұрын
This is a really stupid question but I'm just starting getting into working on my own airsoft guns and modifying my hi capa. Will a simple precision screwdriver set do or are there certain uncommon sizes of bits you have to make sure you get?
@ValiantAirsoft
Жыл бұрын
Standard metric hex sizes and phillips
@TIMTOM-df2vt
3 ай бұрын
So do o get a 5.1 or a 4.1
@Wyhaq
Жыл бұрын
I choose to believe that the only reason you are using the edge nozzle is simply because it color matches the rest of the build. You can not change my mind, I will not allow it.
@ValiantAirsoft
Жыл бұрын
I've had zero issues with edge nozzles, while cowcow and guarder fail constantly 🤷
@Wyhaq
Жыл бұрын
@@ValiantAirsoft I was joking. The nozzle blue matches way too close to the rest of the gun blue
@sausageofmarnies2799
Жыл бұрын
I'm working on a Capa right now but I'm having trouble solving one issue. I've assembled everything and it cycles fine when testing manually (without a mag) but any time I try shooting it when it's pressurized it just dumps air. I'm assuming it's something with the BBU, nozzle, or hop unit but I'm not sure what it may be. Have yo7 experienced this and if yes do you know how to fix it?
@ValiantAirsoft
Жыл бұрын
Try increasing your hammer spring strength
@printliferc1994
Ай бұрын
it might be your o ring in the BBU
@sausageofmarnies2799
Ай бұрын
@@printliferc1994 whatever it was it's fine now, thanks for the input though
@printliferc1994
Ай бұрын
@@sausageofmarnies2799 np
@NyLobo
Жыл бұрын
Did you have to do any modifications to the frame ?
@ValiantAirsoft
Жыл бұрын
No mods just fitting to the slide as usual
@NyLobo
Жыл бұрын
@@ValiantAirsoft oh ok maybe it was just mine lol
@KazukoPosts
7 ай бұрын
Combined price?
@alejandropileno5412
Жыл бұрын
Hello, where do you get the rubbers that you put in the external barrel before putting in the internal barrel?
@ValiantAirsoft
Жыл бұрын
They come with the lacapa tornado barrels
@ethanmitchell7479
Жыл бұрын
is there a slide catch that is extended and has a thumb rest?
@ValiantAirsoft
Жыл бұрын
Yes. I have one on there
@BaSeBaLLnUgS419
9 ай бұрын
Is there a way to delete the grip safety while still using the same chassis? I don't see a point in 2 safetys cuz it's just unnecessary.
@ValiantAirsoft
9 ай бұрын
No, it is a function of the replica
@purpletiger3652
Жыл бұрын
Beautiful gun but I’ll I can focus on were his thumb nails
@slerpn
Жыл бұрын
isnt everything above the frame compatible with the TM 1911?
@ValiantAirsoft
Жыл бұрын
I haven't tried it myself but I think a lot of parts are interchangeable.
@Chinhnguyen0497
Жыл бұрын
does all 5.1 Hi-Capa shared accessories? I'm looking to buy my first bb gun, but I don't know if they're the same
@ValiantAirsoft
Жыл бұрын
No they do not
@bensonni6066
10 ай бұрын
Do back straps come with the grip (for the hammer spring regulator)? CY Capa Customs “Diamond Pattern” Colored Stippled Grip - Red is what I wanted. Am I able to build one without needing a stock TM hi-capa 5.1?
@ValiantAirsoft
10 ай бұрын
It's been awhile but yeah they should
@RealPersonWay
2 ай бұрын
Why don't you just put in the bottom piece of the hammer?
Пікірлер: 319