I built a budget quad using that frame a few months ago and I think it's pretty decent for the money. Do yourself a favor and buy an extra one so you have all the parts you need to repair it, since it's only $30 for the whole frame. I haven't broken any arms yet but I have broke the top plate. I also used the same VTX and it works really well just make sure you secure your antenna really well. I had a crash where the antenna ripped off and broke the MMCX connector on the VTX. That stack looks pretty good for how much it is. On mine I used the Speedy Bee F4 50 amp stack.
@Willy_Tepes
5 ай бұрын
Soft mounting was a troll. Drop it!
@Dragdude511
Ай бұрын
Hey drainman could you help me out
@thirdpartycookie
10 ай бұрын
I would have used Emax Eco motors instead of these ancient sanguk motos
@Chillin-fpv
11 ай бұрын
One of my buddies printed me some arm motors protector/ feet things with a steel ball bearing in the center so it will slide really smooth on anything you touch down on. Its pretty sweet
@C0RT1Z
11 ай бұрын
Any chance you or your buddy have the stl for em? Would be killer if I could print em for my new SourceOne frame😬
@Chillin-fpv
11 ай бұрын
@C0RT1Z so I found it but every time a comment the url even when broken up with spaces it automatically gets deleted.
@Chillin-fpv
11 ай бұрын
Just Google 16 x 16 drone skid steel ball bearings
@Mr.Amazing-vx3li
7 ай бұрын
Thats a really cool adaptation. Great idea
@miquelmarti6537
3 ай бұрын
@@Chillin-fpv just got it from thingiverse. What a cool idea! Thanks
@BOTGRINDER
11 ай бұрын
love a good budget build.
@1OFF4U
Ай бұрын
HELP!!! I have a YUNEEC Q500 ST10+ quad that i purchased around 2015 and I can't find support for this drone anywhere. I need to update the firmware, it will fly but has no functions like "RTH". Can i simply replace the STACK and start over?
@TomasWatchReviews
11 ай бұрын
that is surprisingly cheap. Here in Europe it would be a struggle to find a decent half alive used 5' drone for that price. In my story I just got lucky, 200eur I got full racing 6s drone with 2 extra frames, 5 batteries, charger, a bucket of props, hand-full of spare arms, extra 5 motors, screws, etc etc.. So from my experience I would say that buying somebody's "cleanup bundle" is always the best from financial side. Some are upgrading to HD and just getting rid of all analog.. Good times for those who are fine with analog :) Got eachine ev800d 60eur and betafpv literadio 2 elrs 40eur :D So 300eur full setup with bunch of extra parts. Oh, and GoPro session 5 100usd, so 400. Full summer of beating, only broken one arm :D
@RafaelQuizonvlog
2 ай бұрын
True mate.
@FatStacksArt
7 ай бұрын
I love things that fly so drones were one of my favorite toys since I was 8. I am now 13 and want to build a cheap drone because I am a kid and don't have that much money. I saw this video and was in love. Not only is it a drone it is an fpv drone so I am super happy to start building!!
@marktsarenko3943
6 ай бұрын
How’s it going? I built my drone at the same age as
@thman2180
11 ай бұрын
Could we possibly get a 3-4 inch 2024 build I'm not ready to commit to a 5 yet 😅
@Joey-Jdi
6 ай бұрын
2024 build in December is wild
@LandonCarson-r5w
6 ай бұрын
What's the flight range?How long does a battery last on that
@jayzzz1234
11 ай бұрын
Congrats on your botgrinder ranking 😂
@RickJamesFPV
11 ай бұрын
😁 Bot was pretty harsh with Rotor Riot.😂😂
@jayzzz1234
11 ай бұрын
Little harsh on Bardwell to 😄 🤣
@adameq10
3 ай бұрын
Hello, thank you for this video! But frame is no longer available, can you recommend another i can buy?
@BeachbumfromBrick
Ай бұрын
Especially living near the beach .. we get whale and dolphin. Sea bass, fluke, blues, strippers, seals and otter even. Sharks? YUP.
@Jacobs_photography_2024
4 ай бұрын
Few questions, Battery’s? How long do they run, where to buy Can u link DJI o3 or something Props, where to buy, Thanks 👍
@flintcoat2596
Ай бұрын
I live in Wyoming at 5500 ft elevation. Would I need different motor speeds or greater pitch props? Any help would be appreciated
@BeachbumfromBrick
Ай бұрын
It would be awesome to have vacuum suction cups on these guys with air tight vacuum to stick on glass or metal and more! Maybe like pontoon floats w/cams below the floats am Nd surface? That’d be cool
@brianthekid9
Ай бұрын
Hi there just saw your channel, awesome, was wanting to no, can you build me a 8s racing drone for $250 if I sent you the money, thanks
@mkadawametwa
2 ай бұрын
nice how almost every piece is out of stock... and you don't mention goggles or a Transmitter as this is supposed to be Beginner and they wouldn't have this equipment!! lol
@lxner40
8 ай бұрын
With all those parts the price for me is a little over 200$ and it might ruin my chance at gov because I can’t spend that much what do a do.
@autonoob
11 ай бұрын
Must have raised the prices, I get it to 199,78 USD excl. shipping. Without the 3d parts.
@LehtusBphree2flyFPV
10 ай бұрын
I prefer flying 4s and 6s on the same Quad. 4s motors with a throttle limit of 66 on 6s. Flys great, and you're not left out flying 1 type of battery when you have more 4s than 6s.
@ShiestyCODM
3 ай бұрын
But how much is the controller how much is the batteries this video is not complete sorry sir!
@naiinehall1061
2 ай бұрын
The radio remote cost 250$ , it wont fly without it so thats more than 150 ~
@ChrisQuadFPV
5 ай бұрын
I think you installed the vtx upsidedown. (Maybe)😮
@DynamoClips
19 күн бұрын
i got roasted for wanting 10 thousand kv motors 💀
@javiers.ramirez7862
4 ай бұрын
Wtf what’s that intro audio . my mom looked at me all weird and called me a gay boi. 😭
@NikG603FPV
11 ай бұрын
I would use a smoke stopper to test it first because I don’t trust my soldering. lol. Nice build though.
@pommesschnitzel8673
5 ай бұрын
Damn not only do i live in Europe but all the parts on the list are out of stock😢
@Joey-Jdi
6 ай бұрын
current price of the drone is 320$ before upgrades
@turalsadik81
3 ай бұрын
Will try building this. Battery, google ?
@roguebloxog
16 күн бұрын
Plz 🥺🥺 give me one of those drones 🥺🥺
@CursedEdits624
3 ай бұрын
Love the tutorial but that is not $150
@Marcus-xl9kr
26 күн бұрын
That's what I've seen a lot of with these build videos. I started buying parts for different "150$" and it has turned closer to 250$
@agespin
3 күн бұрын
I need you to build one for me.
@damaylaphoenix1155
3 ай бұрын
do you have the print file for the tweezers?
@johnrosner8964
11 ай бұрын
Nice build Except nobody wants analog anymore.
@thirdpartycookie
10 ай бұрын
yeah, for real. Can't wait for openIPC
@jiatan_fpv
10 ай бұрын
@@thirdpartycookie The latency is shit with openipc. Works for fixed wing with an FC, not FPV quads..
@thirdpartycookie
10 ай бұрын
@@jiatan_fpv they have now hardware that can do DJI latency. Check it out
@Smagsfpv
9 ай бұрын
I wanna see you do a build video with the Vanny Pro 🤘
@arthurrosenbrand
2 ай бұрын
Can you connect to betafpv gear
@cupalupa530
5 ай бұрын
I havent seen better tutorial yet
@poorlifetv3452
2 ай бұрын
You can give me one of your fpv
@robertnastasi4738
5 ай бұрын
I do like speedy bee but the customer service directly from speedybee sucks. F405 stack no black box, potential ESC problems one lit on fire but I cannot say it was there fault directly it lit up after 2 months and I own3 or more iflight ESC,s that were my daily fliers never a problem, and a TX800 that never worked, and I went back and for for a year. They never even read a complete e-mail and wanted me to start trouble shooting from step one over and over, I threw it in the garbage. I like what they are doing for the money and ordered a new f405 stack. Hope they worked out the problems.
@Aperturex1337
8 ай бұрын
This is so sick dude. Added everything to my cart and ordering tomorrow once payday hits! 😄
@anonymouse...
11 күн бұрын
What’s ur jobe
@BeachbumfromBrick
Ай бұрын
It would be awesome to have vacuum suction cups on these guys with air tight vacuum to stick on glass or metal and more! Maybe like pontoon floats w/cams below the floats am Nd surface? That’d be cool
@perfectfire
5 ай бұрын
Hey, thanks for all of this. Some of the parts are out of stock, but I think I found the exact same ones at different shops or ones that are at least equivalent or even slightly better. I am a *complete* newbie and the one thing that is missing for me is: what propellers should I get? I assume the type of propellor is based on the weight of the aircraft, desired speed, desired efficiency and kv of the motors, but since I am new I have no idea what propellers would be good for this build. Also since I am new I assume I need an RC controller to control the drone and since it is an FPV drone I would need some video goggles or at least a video screen. What would be good options for those? Edit: I just realized there is no mention of batteries at all. What batteries should I get and where do I mount them. You mention a self-built power supply, but I assume that is just used on the bench in lieu of plugging in a charged battery, but still, I would like some info on what battery to get. Edit2: Also your parts list doesn't list the capacitor and I don't even know what it is for. Edit3: My FC didn't have a plug for my camera and I had to get a different camera because the one in your list was out of stock at where I was ordering everything at (to save on shipping). I had to search all over the web to figure out how to wire it up. It had the standard 3 wires, and then another 2 wires for I guess an OSD key-press board? I'm still not sure if I got it right. I think I got the 3 important things right. The only SpeedyBee FC with a plug for analog video is their high-end one: www.speedybee.com/speedybee-f7-v3-flight-controller/. I can't find any other on their site with a plug for analog video.
@christianetorres350
5 ай бұрын
Hola Drainman, I just build a quad with the same stack. But I have a small problem, when I arm the quad is arming too high, it should be on idel. How can I fix it?
@danielvasiliusus5658
10 ай бұрын
Hello,I have an TCMMRC UR26 Mermaid 220 drone but I don't have any 3d prints and I want some but I don't know which one fit my frame.Do you have any clue ?
@YTFPV
9 ай бұрын
Wow so simple i guess next step is your betaflight setting and ready to go really .What would you recommend to make it winter snow proof ?
@robertmueller6979
2 ай бұрын
The intro really should give us just the tiniest idea of what we can expect from this build other than "the best!"....
@ruebenfilmz
10 ай бұрын
Appreciated! Astute on point. As always, an immersive tutorial.
@patriciacecil724
3 ай бұрын
where is the links
@zaik04
7 ай бұрын
Dude couple questions. Im just learning. Is there no antena? How do i decide props? And what material are you printing for your parts?
@jdetka
6 ай бұрын
Thanks for sharing this budget build. This will be my first build in a long time. I'd like to set this up with my FrSky transmitter but I'm not sure what receiver I need to buy and how to connect if I want an analog setup. Any suggestions?
@brendanbugliosi3923
3 ай бұрын
Do I program it
@willsintheair
11 ай бұрын
I had no idea you could still find those DYS Samguk motors. Pretty great motors for the price. You can literally order 6 (two spares) for the average price of 4 normally priced motors. The c-clip is annoying but at least there’s a spare in the box.
@Krash_fpv
10 ай бұрын
I just broke one of my 5 inch and frame is put of stock so I bought a source one v5 last week to fly until my frame comes in stock....so much room in thr frame.
@Xtzgkxgfy
4 ай бұрын
This will be my first FPV drone what controller and headset should I get
@IPlayRandomGames_offical
7 ай бұрын
Just wondering what kind of controller and goggles should I use if I build this for cheap?
@gapsnapperfpv3947
7 ай бұрын
Hurray NOT HD ! subscribed just for that fact ! So how clear is that VTX ? Better than TBS ?
@BallPingFpv
9 ай бұрын
Bad ass i didn't think that would be possible in 2024 150$ bucks heck ya let's go!
@marktsarenko3943
6 ай бұрын
Why you lying about the price?
@dimensionjester9052
Ай бұрын
prices change
@mathewrtaylor
10 ай бұрын
Great build! Could you do a cinewhoop (analog of course) for similarish amounts?
@marklitvin9291
11 ай бұрын
God bless you man! For every tutorial you make.
@FunnyBitsMedia
10 ай бұрын
hi :) just want to ask if you can pair the radiomaster tx16s with the DJI o3 air unit ?
@zackleeFL
4 ай бұрын
Is that Melbourne? I'm up in Titusville.
@Felx938
6 ай бұрын
What speed can you get with this build? Thinking about making it
@robortalien
6 ай бұрын
Cant find googels in the description. What are some good cheap googles to use with this setup
@dondupuis4007
11 ай бұрын
Thats frame is as thick as Tana frame from rotor riots, know of a dead cat frame built that thick?
@Timpox
5 ай бұрын
Hi can i ask will work your ELRS for tbs tango 2 pro
@teamlad02
7 ай бұрын
Ia the video at the end by a gopro or the camera he fixed can someone reply?
@jacojojo42
11 ай бұрын
do you have the myFPVstore in melbourne FL?
@J2K-303
6 ай бұрын
what about the goggles and remote or does it come with the other things?
@ghostrot
11 ай бұрын
How do you guys get these price i pay mee then 50 for the frame alone
@RickJamesFPV
11 ай бұрын
What's up Drainman? Keep it going Brother.🤙🏾
@CarelessPapo
4 ай бұрын
Broke me wrist so for now I’m on sim. If you got a quad I could get off you. I’d loveeee you for life🥲
@MericanOutlaw
7 ай бұрын
Dig it man. Just got back into fpv after 5 years off.
@rhettlee
6 ай бұрын
Bruh you have so many damn quads 😂😂😂
@marktsarenko3943
6 ай бұрын
This is a 2023 build buckaroo
@24kJames
10 ай бұрын
Nice friggin work Drain Man. Quality video.
@TomDenny-s7n
10 ай бұрын
How well does this drone fly?
@georgeaura
11 ай бұрын
What would be a good digital starter setup goggles and camera? Budget friendly
Пікірлер: 122