Dude! You are one hell of a presenter and teacher. I have never built a drone before however I love flying and have all of the DJI drones. After watching this class of yours I will start buying parts to build my first ever drone. Definitely I am that guy that loves to go BIG so 10 inch it is. Hopefully I’ll be done by fall. I will join your site and I’ll keep,you posted. Thank you for your support doing all these amazing and helpful videos. LO MILLER
@dronecamps
Жыл бұрын
You’re welcome! Keep me posted !!!
@patrickpendergast898
6 ай бұрын
Same here. I recently got a phantom 4 pro as my first drone and was bored of it in 2 days. This rekon 10 build seems fairly straightforward. Now I’m shopping for parts planning out a build.
@Bollibompa
6 ай бұрын
Why don't you flux the esc pads?
@Bollibompa
6 ай бұрын
Also, what is the kV of the motors?
@JSKCKNIT
Жыл бұрын
I'm in the process of building this. Going 8S though. It's going to be a slow build, ordering parts every few weeks. Kinda frustrating though cause I just wanna fly it!!
@ronaldcollins9618
9 ай бұрын
I know this video is 6 months old but I'm just seeing it. Something isn't right with the GPS wiring. You wire TX and RX to an available UART, not to SCL and SDA. You would wiring up SCL and SDA if your GPS module has a compass and your don't cross them over.
@dronecamps
9 ай бұрын
It’s working fine.
@matthewkelley4477
4 ай бұрын
this video is horrible soldering and backwards building
@MountaineerFPV
Жыл бұрын
Always clean your tip. That’s what she said…😂👍👍
@dronecamps
Жыл бұрын
Always! 😂
@MountaineerFPV
Жыл бұрын
@@dronecamps a beast!
@21purebred
9 ай бұрын
I was just wondering if it would be possible for you to update the parts list for this build because i was very interested in trying out this build but the links for the FC and the ESC are not good anymore and says that the site no longer carries them. I'd really appreciate it, thank you.
@Theextremepessimist
4 ай бұрын
Getfpv has good customer service. I’m new and I have used them.
@johncarold
Жыл бұрын
10in Really, I just finished my 7in Source one, and now we have a 10in quad. It's funny that I used almost the same electronics. F722, 50a ESC, Caddx Ratel starlight and AKK DVR 1200mw. Thanks for the build video. Looking forward to the video on the flight
@dronecamps
Жыл бұрын
Awesome. I’d love to see that build. Ratel is my fav. Let me know if you get a 10” frame to build
@spacemandaxx
11 ай бұрын
Any flight video on this 10" quad build?
@genefoxgreenmountaindroning
Жыл бұрын
Thank you for the great build video.
@dronecamps
Жыл бұрын
No problem 👍
@KTHKUHNKK
Жыл бұрын
Excellent video super excellent. Keep up the good work Justin.
@scottbattaglia8595
Ай бұрын
A jar or rosin paste flux will chang your life, the inline solder flux is never enough
@patrickpendergast898
6 ай бұрын
I’d like to see you convert this into a hexacopter like the flywoo venom H2.0 with the center motors mounted on the bottom as pushers.
@dronecamps
6 ай бұрын
That would be wild. 🔥
@evilynz
9 ай бұрын
you can also edit tx and rx input information on your remotes tbs lua settings.
@ShadowOppsRC
Жыл бұрын
Thanks for sharing man! Drone camps door bell I mean dog bark in background!
@dronecamps
Жыл бұрын
Always a dog, chicken, mowers, or children noises around here 🤣
@ShadowOppsRC
Жыл бұрын
@@dronecamps kids or dogs here! Sheep herding dogs that will kill chickens so no chickens!
@shenanigans8apeach
9 ай бұрын
Can you please start including total cost in these builds?
@PhillysHobbyHouse
7 ай бұрын
I noticed your using a 65a esc with 65.54a peak current motors? I am planning a ten inch build but I was under the impression the esc needs to be a higher rating than the motors?
@1982travm
3 ай бұрын
Did you ever get this in the air?
@dragginalinecatfishing4719
5 ай бұрын
The flight controller that you listed is no longer in stock. Do you have any other that you can recommend for this build.
@TomFYouTube
5 ай бұрын
Hat flight time are you getting eith the big pack? I'd like 30minutes or more. Thanks
@CarolinaAirshots
Жыл бұрын
That's a big one for sure. You made the build seem simple, good job ! Did someone steal your DC Hat ?
@jaghook
8 ай бұрын
hI, Can you tell me the electonic components and motors i would need for an 8 motor, ten inch two bladed drone for heavy lift. If you have a vid for this i would love to see it. but any tips would be good. You seem to be the only person on here that i can understand. And also i have these motors, would they be any good for what i want. very best regards Jim.
@johnwalter6410
8 ай бұрын
Do you think xing 4214 660kv would be too big to use on a 10 frame with 11 inch props?
@cch201992
Жыл бұрын
Epic 🤌🏼
@rcrc2340
Жыл бұрын
Got any flight videos with this monster? I imagine getting a smooth tune with a big rekon frame (not known for their stability) will be very difficult. I've been debating about going for the XL10 just to take advantage of the (hopefully) better tune and more rigid frame.
@marvinrainwater6526
7 ай бұрын
Do you have tune for the Rekon 10? I have built it but can’t make it fly great.
@benleong2008
9 ай бұрын
Is the stock dji o3 antenna good enough for long range? Or is it better to replace with other antennas like iflight drones do?
@Mateo-wf1yz
6 ай бұрын
A question, can you use the O3 camera/tx and the DJI goggles 2 without this remote ID thing? Im in Europe so no US rules here.
@dronecamps
6 ай бұрын
Yeah
@fanatic_joka
Жыл бұрын
Any news on flying this beast? Are Props in View ?
@Picit13
11 ай бұрын
What KV motor are you using? A couple links are gone so had a question which flight controller and ESC that you used?
@GromMolniya-vq7ko
8 ай бұрын
What motors are better for 10" propellers?
@dilbertmcfly5986
11 ай бұрын
Typically, you want to show good job soldering and know what you are talking about when you make a video for youtube... At the very least, use some flux.
@dronecamps
11 ай бұрын
Yep yep ✅
@I.Silaghi
11 ай бұрын
Scl, sda pads are not for magnetometer?
@allanfulmer7468
11 ай бұрын
Curious if it's feasible to center mount a full bmpc 4k and mount battery underneath?
@shenanigans8apeach
8 ай бұрын
@dronecamps do you assist with builds? With compensation of coarse. Thanks
@dronecamps
8 ай бұрын
We do yes. check out www.dronecamps.com
@Shooting-Up
4 ай бұрын
Isn’t that basically a flying guillotine? 😂
@crackup007
Жыл бұрын
Great! 😁👍
@KTHKUHNKK
Жыл бұрын
Have you ever built a hexacopter ? I still love my Yuneec TY H 480 Keith
@dronecamps
Жыл бұрын
Yeah the Dji flame wheel
@dronecamps
Жыл бұрын
I still have a Yuneec H
@babyzfpv1234
Жыл бұрын
You have hair! And it looks way better than mine lol.
@dronecamps
Жыл бұрын
I got lucky 🍀
@duanebowman9595
Жыл бұрын
Would this fram handle 5008 340kv just for Long Range For video not Pushing it?? Have 4 from another build.
@dronecamps
Жыл бұрын
Maybe the arms are 8-9mm I think.
@duanebowman9595
Жыл бұрын
@@dronecamps Thinking this could be a good cinadrome with these motors and extend the time. Thank You
@jayzsen
11 ай бұрын
Please relink the controller and ESC's. Thanks!
@Rcschim
Жыл бұрын
once again - it's a bluescreen effect - and at the same time it isn't ;) quite a paradoxon ;)
@johnwalter6410
10 ай бұрын
You should also be putting a thin fiber or metal washer on those motor mount screws. The bolt head is too small and put pressure on that carbon fiber. It could crack the arm under high torque,. Just saying. Obviously you know what you are doing. But you dont know everything just l;ike zi dont know everything, Im sure you know things I dont. But you should putn a thin washeer or shim on there.
@dronecamps
10 ай бұрын
I do “get” and know that. Sometimes things slide by. Very good point my friend thanks.☝🏻👍🏻
@johnwalter6410
9 ай бұрын
@@dronecampsoh you usually do. You missed it. Ok. Ha. I figured. You never know. I've seen dudes who have been flying and building for 12 yrs and they still don't know that. I am by no means no at all you know way more than I do let's just say that upfront. Just figured I'd mention just in case.
@danialfpv
Жыл бұрын
My hairline is higher than yours 😭😭😭
@j.c.m5168
Жыл бұрын
Any reason not to go with diversity and run 2 antennas?
Пікірлер: 69