I hope you all enjoyed the video! Make sure to subscribe so that you don't miss future videos and other content, and check out my Patreon page if you'd like to support me and my projects. www.patreon.com/StewartTechnologies
@raspberryPi1337
Жыл бұрын
Thanks for sharing this, I'm building an hexapod from scratch, it helps me a lot
@desktopantec2290
Жыл бұрын
keep up the work these people improve society
@mattimotion
2 жыл бұрын
Really nice balance between functionality and cool look on that leg design! Exited to see how the result will turn out
@whitneydesignlabs8738
7 ай бұрын
Very cool. Great design and build work!
@sUASNews
Жыл бұрын
I'm with you all the way on the whys of hexapods! Always surprised there are not more about.
@Vancha112
2 жыл бұрын
Eyy I was righ! :D a hexapod ^^ Looking forward to it, I'll have to postpone watching for 4 more hours
@chriss590
Жыл бұрын
I'd enjoy seeing a mini-hexapod video.
@PFstoker
2 жыл бұрын
Good explications ! Great video !
@mayerlopez2088
Жыл бұрын
Hello sir, can I get the copy of your CAD design?
@noahb7947
Жыл бұрын
this video is incredible! youve inspired me to make a hexapod
@gedr7664
2 жыл бұрын
awesome video mate!
@WolfA4
Жыл бұрын
me at 5:15 : "I wonder if he's considered making the tip of the foot a separate piece so he can print it off in another material like TPU and in different shapes." me at 8:00 : "I love this guy."
@eugenewattsii252
2 жыл бұрын
Very exited to see the build process for this one let’s hope it turns out just as good or better than the last project
@kavorka8855
Жыл бұрын
Really nice!
@reallydumbdumbass
4 ай бұрын
This is awesome, ive been designing a crab robot but havent figured out how im gonna work the legs, and this helped a ton! keep it up, and I cant believe that this video (and your others) dont have more views
@FeWo_Krohn_Cuxhaven
2 ай бұрын
Keep going man! :)
@SoCalRobots
Жыл бұрын
Looks great!
@Cxtmcrafted
Жыл бұрын
Hey man love your content i am immediately subscribed :) keep up the good work
@adityasinghgaharwar8397
Жыл бұрын
Hello, can you please share the complete design of your hexapod
@notAnxyte
Жыл бұрын
Nice yo, keep it up
@danielgermanpalacios
23 күн бұрын
Hola. Hermoso modelo. Estoy buscando los archivos STL, al menos de las patas. Los tienes?
@jackycheung8398
10 ай бұрын
Cool bro, I'll try making it with junk. Because all the parts are very expensive here
@willcubemakes
Жыл бұрын
Question, I've been wondering this for a while, how do you get the 3d model of the servo so you can design with it in cad instead of taking measurements? Or do you just take a lot of measurements?
@StewartTechnologies
Жыл бұрын
If they're simple models I design them myself after taking measurements. For more complex things like servos, you can find models online from manufacturers or through sites like GrabCAD.
@spelright6370
2 жыл бұрын
Really cool project, can't wait for part two. What did you use in this video to power the PCA9685 chip, and what is the plan to power the finish robot?
@StewartTechnologies
Жыл бұрын
I used a 5V 4A power supply for the servos and the 5V output from the Arduino to power the chip. I plan on using a LiPo battery with a SBEC to provide the servos with 6V. I talk about it a bit in part 2, which is out now!
@spelright6370
Жыл бұрын
@@StewartTechnologies I have been making a 4 legged robot dog and use a lot of of the same ideas. Right now I have it plugged into a 5v 10a charger. It’s probably overkill but it’s what I had. I will watch part two rn.
@imad-eddinenaciri6238
Жыл бұрын
Could you please give us the STL files of the 3D design and thank you
@sufiyan5391
7 ай бұрын
Hey! Can you please share me the 3d model of leg you designed in CAD?
@sjamesparsonsjr
2 жыл бұрын
How about a breath of the wild guardian skin?
@sufiyan5391
7 ай бұрын
Hey! Can you please share me the 3d model of leg you desighed in CAD?
@ventusprime
Жыл бұрын
i like PhantomX type Hexapods
@a330turbinex7
4 ай бұрын
What happened to this project? The patreon is not working, the web site also not working.
@sametozbay3853
10 ай бұрын
can i build this with little blue servos? i have lots of them.
@vedantkadam5191
2 ай бұрын
hi can you please share the dimensions for this leg
@ayaansamad4849
10 ай бұрын
Which application do you use for cad is it free or not or how much does it cost for a monthly or yearly subscription by the way your hexa pod looked really cool and i also a build a hexapod so can you please tell how much did it cost you build a hexa pod
@user-rl8qg3pq4o
Жыл бұрын
Where can i find the arduino Code
@farhansarfraz4046
Жыл бұрын
Love the video. Was wondering, what are you using inside the screw holes? And how did you mount them inside the 3D printed parts?
@StewartTechnologies
Жыл бұрын
They're Heat-set inserts that are threaded on the inside. I used my soldering iron with special tip made just for the inserts.
@eggthespacedick
Жыл бұрын
this is amazing! Really keen to start on my own. quick question, what pushfit bearings are you using on the rear side of the servos??
@StewartTechnologies
Жыл бұрын
I'm using 604ZZ bearings!
@navi4181
Жыл бұрын
Can you share your build files??
@aungsupaing1949
2 жыл бұрын
Subscribe done
@bleysingram7789
Жыл бұрын
yes , miniature version would be the bees knees
@BiswajitRoy-mq5le
3 ай бұрын
Can you provide CAD file and code
@sanjeevraja9907
6 ай бұрын
can you please release your stl file
@AkmalAlif69
Жыл бұрын
hi, may ask what 3d printer do you use for your projects?
@StewartTechnologies
Жыл бұрын
I use a Prusa MK3S
@stuff2008
9 ай бұрын
kegit
@imad-eddinenaciri6238
Жыл бұрын
Could you please give us the STL files of the 3D design
@StewartTechnologies
Жыл бұрын
They'll be released to my Github once most of the design is finalized.
Пікірлер: 52