Just seen this on my local marketplace. Awesome build for a good price. I have a boosted, b20v, awd, 5spd. I made 267whp on 14psi on the greddy kit. Finally going with a built b18 but my clutch got sent to my neighbor and they kept it so im fighting with fedex😢.
@Donnythelatemodeltech
8 ай бұрын
Nice 👍
@Donnythelatemodeltech
8 ай бұрын
Sorry about the clutch.
@swanginfleet
8 ай бұрын
@@Donnythelatemodeltech Yeah, I appreciate it. I bought it (CC stage 4) from Humble Performance because I've been watching their channel for years. I was not pleased with how they initially handled the situation but am giving them time to resolve it before I drag their name through the dirt.
@9krpmsrotationsperminute971
7 ай бұрын
Wtf 260hp that's kinda weak, my turbo GSR makes 412whp with only 13psi?
@swanginfleet
6 ай бұрын
@9krpmsrotationsperminute971 Well psi is not a great way to look at it. Your turbo may be larger and moving alot more volume. I had a greddy 18g which is fairly small but spools quick. Also, the b20 I had was very limited on what I could do.
@MstrB0ss
8 ай бұрын
Bro, the progress is super dope to see. Been subbed for a decent while. Btw, i have a black 98 awd manual that I'd let go for $1500. Moving to the Philippines for a few years at least. Has two codes, one is tps the other is iacv I believe. Trans shifts damned good and other than the idle issue the engine is crazy strong. Previous owner said its a jdm b20. Otherwise have $4500 in receipts over the last 3 years for new cat clutch full tune up and all fluids including Trans and different, new master and slave cylinder. Most the major maintenance is done. Interior is very decent. title appears clean on title however it when searching records it was stolen from the previous owner. Again, title has zero indicated of salvage and is in my name. Only have about a month left till I have to go. Im San diego. I would love to see you start a new project with it. Let me know.
@Donnythelatemodeltech
8 ай бұрын
Wow , that’s a great offer and really do appreciate it. But, sadly my CRV days might be over, currently this car is for sale. I’ve got some health issues I’m dealing this currently and heavy wrenching I currently can’t handle.
@MstrB0ss
8 ай бұрын
@@Donnythelatemodeltech sorry to hear. Well wishes upon well wishes! Probably going to do an awd 2nd gen oddessy in the Philippines. Probably have another 1st gen crv as well. Ok, well take care! Thanks!
@cartelbeaux7040
9 ай бұрын
🔥Amazing content! Kept my attention from start to finish. I have a 07 Crv, definitely love this build.
@Donnythelatemodeltech
9 ай бұрын
Most appreciated! Happy New Year!
@Gorillaforce1
7 ай бұрын
the left front mount can you share where you find it? BTW Your crv look sick
@NagaMotorsports
9 ай бұрын
W mans, I got a 2000 crv I’m messing with and don’t know where to start hah
@Donnythelatemodeltech
9 ай бұрын
👍
@AS-zg8gv
4 ай бұрын
I wish I was either mechanically inclined or had money
@vipcress
3 ай бұрын
You, or a future version of you are both.
@AdamNZ
3 ай бұрын
You can be if you try and apply yourself
@miguelgutirrrez1385
26 күн бұрын
Hi there brother I got a crv same is yours I'm going to lowered and Im going to need the same extenders where do you get them if you can share the link or part number o really appreciate it ..thanks by the way nice crv !!
@Jason-nk4yr
9 ай бұрын
Awesome documentary of a rd1
@Donnythelatemodeltech
9 ай бұрын
lol thanks man!
@AdamNZ
3 ай бұрын
Hope to do similar things to my 98 CRV RVI
@12dan-t1i
2 ай бұрын
ive actually messaged you on facebook interested in buying the crv, really cool build, is it perhaps still for sale?
@THEGHOST-p7q
13 күн бұрын
You need to adjust the timing or put a set of valves and port polish intake manifold and put a piece of foam in that intake pipe you have so no water sucks up in it 27:13
@THEGHOST-p7q
13 күн бұрын
Ypu haveone lead off the oil one for the car you can put a connector that goes in the wire and run it in from the pressure sensor to that you have 26:18
@Sciondom
9 ай бұрын
Didn’t know it was you at 1st.. loving the recap episode ✌🏽
@Donnythelatemodeltech
9 ай бұрын
Thanks Brother. Happy New Year!
@robertdiehl9003
7 ай бұрын
This man is an Ace Master mechanic. Glad I found the channel.
@robertdiehl9003
7 ай бұрын
Great video. I bought a 98 crv I bought recently. Definitely a love/ have relationship for me. Such a p.i.t.a. to work on because of North East rust in my state...
@Donnythelatemodeltech
7 ай бұрын
Right on!👍
@AdamNZ
3 ай бұрын
Same dude. I got to fix mine but it ain't rusty.
@9krpmsrotationsperminute971
7 ай бұрын
Eww Jointed sleeve B20 Weakk!! I Hope it last you longer than the majority😂
@THEGHOST-p7q
13 күн бұрын
Mine was urban camo red grey and black 8:20
@luisochoa495
Ай бұрын
Hopefully we get more Crv content soon!
@andrewloves1993
9 ай бұрын
I have a 5 speed rd1 and want to do a VTEC build. How much in total would you say the VTEC part of this build cost you?
@Donnythelatemodeltech
9 ай бұрын
I spent at least 1500. Machined head, ecu , injectors, gasket , VTEC oil kit, arp head studs, aem afr , had to source cams and VTEC solenoid.
@Donnythelatemodeltech
9 ай бұрын
Power steering was something I didn’t really show in the videos, bracket and pump from a 99 si .
@andrewloves1993
9 ай бұрын
@@Donnythelatemodeltech Thanks for the extra info, how much of a power increase would you say you have gained over stock b20 power? My crv is my family car and I'm trying to push some good decent power but nothing to absurd. I have a turbo Sentra ser spec v and it's to much for my kid 😅, but he also likes my fast cars haha.
@Donnythelatemodeltech
9 ай бұрын
@@andrewloves1993 not really sure, it’s way faster than it was. Not faster than a gsr integra.
@andrewloves1993
9 ай бұрын
@@Donnythelatemodeltech that range sound about right haha, thanks for documenting this whole process, b20 VTEC is awesome
@THEGHOST-p7q
13 күн бұрын
Were did you get the boots for the axles 7:12
@hkk3656
6 ай бұрын
I found you on your garage door spring replacement. Big help. I'm a car guy too, so I just subscribed.
@brandonreynoso4563
3 ай бұрын
What’s better suspension for wanting to keep the car long term lifting it or coil overs?
@ridebiking
Ай бұрын
Stock height good suspension components
@robertdiehl9003
7 ай бұрын
4:05- looks like typical driving in New Jersey....
@victoremanuelish
5 ай бұрын
I just want to be one of them
@dannymiller5648
Ай бұрын
How much for the crv?
@jonathancruz3939
7 ай бұрын
Hi Donny, I’ve been trying to mod my 2021 Honda crv and came across this video, you inspired me to do what you do. Did you go to school for this or how did you learn how to basically build a car?
@Donnythelatemodeltech
7 ай бұрын
20 years as an Automotive technician
@ramgabe1027
9 ай бұрын
22:28 To block guard or to not block guard. That is the question. I’m going with using block guard my B20. Thoughts?
@Donnythelatemodeltech
9 ай бұрын
Yeah, I thought about it. Wouldn’t hurt.
@LevelUpMechanics
9 ай бұрын
Great video! So awesome ❤😁
@Donnythelatemodeltech
9 ай бұрын
Thank you!! 😁
@Donnythelatemodeltech
9 ай бұрын
Feels great to make free videos. lol.
@anthonybryant7390
6 ай бұрын
Wish has your skills and patience. Luv this car momz had same year. Looking to buy some day.
@anthonybryant7390
6 ай бұрын
Ever want to sell it ;) . Really nice work
@bennyvalentine8221
7 ай бұрын
Why are you selling the CRV?
@9krpmsrotationsperminute971
7 ай бұрын
Cause modified B20s are time bombs, go looks up b20 jointed sleeves😂 you won't be disappointed🤣
@redxbell1373
8 ай бұрын
Was the front lip a 97 Cherokee?
@quickspoolgarage
8 ай бұрын
Dump Clutch Test!! Those are always fun 🤣
@Donnythelatemodeltech
8 ай бұрын
They are!
@nastyy_mk4
7 ай бұрын
what are the specs on those Vs wheels?
@gregovolsung8769
9 ай бұрын
Always well spoken and quality material. Awesome; Thank you
@Donnythelatemodeltech
9 ай бұрын
Very appreciated.
@THEGHOST-p7q
13 күн бұрын
How much and where do i get one i nesd one i have gsr one 26:27
@user-55555-i
9 ай бұрын
❤
@thesonofalivinggod6782
7 ай бұрын
Hey boss where did you buy your vinyl wrap?
@Donnythelatemodeltech
7 ай бұрын
Sponsored by Vvivid.
@thesonofalivinggod6782
7 ай бұрын
@@Donnythelatemodeltech how much vinyl wrap did you need how big was the role they sent you... thanks
@THEGHOST-p7q
13 күн бұрын
I can eye ball them and then i bet people at a shop that its straight for stuff 20:52
@mryang3644
4 ай бұрын
U tryin to flip that crv ? 😂
@Donnythelatemodeltech
4 ай бұрын
Sold it three month ago.
@THEGHOST-p7q
13 күн бұрын
Cams dauk valve springs and retainers 27:13
@АрГолд
3 ай бұрын
CR -V ,1pok sovrimeh klasik 👍👍👍👍👍.xohda⚡. , no akkord 3 ca2 ca4 ca5
Пікірлер: 74