praying for the winner they dont need to warranty anything...
@stennan
16 сағат бұрын
Trust can be lost quickly and takes time to rebuild. Hopefully ASUS can correct their customer service, because they claim to be the most premium PC DIY brand. In that brand value you need to include more than higher prices though, EVGA had a strong brand before they called it quits 😢
@mindurbusiness-b3u
16 сағат бұрын
@@stennan very true. i have multiple asus products over 4 systems in the house, but their recent performance does not incline me to buy their stuff for my next system build! time will tell if they fix the mess they made themselves.
@vensroofcat6415
16 сағат бұрын
Oh, I have built PCs for quite some time and had issues with pretty much every large name in the industry. If I went by your rules, I couldn't build any PC anymore 🤣
@HanSDevX
15 сағат бұрын
The winner? That would be me... I can see the future.
@evlkenevl2721
9 сағат бұрын
Asus has given their reputation a black eye... again. I don't want to support a company that says "Oh well, you'll be back" and just keeps breaking trust to chase pennies.
@mastermind6000
14 сағат бұрын
looks like you didn't notice that 3 of those TR120 fans are reverse mode. the bottom ones are exhausting as well. the fan chassis has the 'rear side' appearance on the top, but those blades are blowing down. it's going to compete directly against the fan on the front of the gpu.
@kevinsoo6642
Сағат бұрын
no.
@docmanh20
9 сағат бұрын
Thanks for giving us a chance to win. I've been in the market for a Micro-ATX case and while I'd like something a little bit smaller, this is really nice.
@mikemariano4012
16 сағат бұрын
"It's very fast memory." 😂😂😂
@Z.FA89
13 сағат бұрын
As other comments have mentioned, the bottom fans are in the wrong orientation. They're reverse blade fans. Hope Paul sees some of these comments and rectifies it. :)
@malccy72
15 сағат бұрын
Armoury Crate (shudders!) - A Halloween nightmare !
@strkilla89
15 сағат бұрын
Exactly why I'll never buy another asus board/laptop and I used to love asus motherboards
@peterwstacey
13 сағат бұрын
Agreed that Armoury Crate is awful (like most of ASUS's software). But you can always just not install it. I have ASUS motherboards in Linux dev PCs and everything's as OEM as you could wish for if you set the BIOS up correctly and just install the OS
@MicahRayburn
13 сағат бұрын
I love this case! I’ve had mine for about a year now. I crammed a 7900XTX with 6x 120mm fans + the stock rear fan into it somehow, and she looks and runs great! 👍🏼
@RobertF
8 сағат бұрын
I built in that case last year. I love it, so much air flow! And room!
@titanuranus2136
15 сағат бұрын
With most bottom air intake cases I find they benefit from being raised up, easy to test if it helps by standing it on some books. When I realised the benefit I used a hole saw to cut some 22mm thick MDF disks, painted them black and stuck them on the existing feet with double sided tape. I would consider the Jonsbo D31 or the Lian Li DAN A3 over this case.
@ejtaylor73
15 сағат бұрын
Thanks Paul, Joe, and ASUS for this. I hope this PC goes to someone who actually NEEDS it, and not just people being greedy that don't. I already have 3 PC's, so I won't enter. Good luck to those that do enter.
@lilclm64
13 сағат бұрын
Man I'm broke rocking a duo core with a 1070, help me win this.
@youngbleu89
3 сағат бұрын
Very noble of you, I'm trying to win this for my son.
@afino61_
15 сағат бұрын
12:55 don't worry, with my last build, I did the same thing definitely a "well, there's your problem!" moment
@whiskeredgundam7765
11 сағат бұрын
I have had to counter sink screws on fans several times for coolers and such. it works just fine... as long as you don't drill to far. Or you could just remove the pads.
@LyricLikeKarma
14 сағат бұрын
I can't lie, that case looks nice
@leeolivieri
15 сағат бұрын
Finally a gleamio giveaway with just one entry. Thank you, Paul
@Grievous-
8 сағат бұрын
It looks like Paul isn't wearing pants. 20:52 😆
@misguidedpanda3209
12 сағат бұрын
Love the case used in this build. I used the same case for a home server build last year!
@typicalthrill
15 сағат бұрын
For the fans, could you put a shorter screw through only one side of the fan frame? So instead of pushing a long screw through the front side, through the back side, and into the radiator, could you ONLY run it through the back side and into the radiator? You'd need a screw driver that could fit through the front side, but maybe?
@1480750
13 сағат бұрын
Yes but it is fiddly, especially where two fans are against each other. You wouldnt want to do it often
@lordmage
3 сағат бұрын
As always Paul thank you for such a simple entry system and a sweet build there
@lordmage
2 сағат бұрын
FYI The gleam details and terms May need an update look at the bottom snipped for your referenGiveaway ends 12/18/2023 at 11:00 AM PT -- winner will be notified via email. PRIZE MUST BE CLAIMED WITHIN 24 HOURS OR ANOTHER WINNER WILL BE PICKED. ce
@chadwickmccarty4944
11 сағат бұрын
Good luck to everyone entering & myself fingers crossed. Also, just thanks for the chance.
@hardlyworgen71
14 сағат бұрын
Liked for Joe's laughter when the memory fell down.
@arcaneidolriots
12 сағат бұрын
I've been working on putting together a new PC build and have been debating about whether to go with a micro-atx case. The AP201 is actually one of the cases I've been considering. As someone who's 5'3" I sometimes have trouble moving or picking up my current mid-tower, and I would like my next PC to be a more manageable size for me! 😂
@coryglueckert1665
7 сағат бұрын
its good to see high end motherboards and gaming pc's using the m-atx motherboard format. when the mother board platform was mostly low end.
@JuiceBoxScott
7 сағат бұрын
I appreciate that the giveaway doesn't ask us to tweet anything
@Melvinh_OG
11 сағат бұрын
Beautiful build! Good luck to everyone!
@pwcorgi2000
15 сағат бұрын
I wish there were more mesh side panels options like this, to use instead of tempered glass. (In General)
@jordanm8595
8 сағат бұрын
very nice editing guys, great job!
@RossHouck
9 сағат бұрын
"Set bonus" I dig it.
@JamesChurchill3
16 сағат бұрын
I have the white version of this case with the mesh side, absolutely love it. A pleasure to build in, looks nice and sits behind my monitor on my desk. I have a small area to fit my PC into and the small size means it can live on the desk instead of the floor.
@Corvinade
6 сағат бұрын
I like that this card is sff ready
@shadowblade1942
9 сағат бұрын
I know the gpu temps are within spec, but that seems like its running hot for how much fan speed you have along with having bottom intake case fans.
@Benwayland21
11 сағат бұрын
Great looking build Paul!
@poeticsilence047
10 сағат бұрын
JJ is awesome. Definitely has an eye for style.
@HS-tj2qp
15 сағат бұрын
You should mention the bottom case fan below the PSU is screwed in through the case perforations, not proper holes, as there are no pre-drilled holes for a third bottom intake fan down there. Doesn't make a difference to the PC because the screwholes line-up, but you should mention all jank.
@n8spL8
13 сағат бұрын
operating the drill w/ sandals on....that's my dude.
@-B.H.
9 сағат бұрын
Actually like the case. It gives me lots of ideas for modding.
@zCaptainz
12 сағат бұрын
Did ASUS copy this case design from Jonsbo, or was it the other way around? Can anyone tell me? Or do they work together?
@paperitgel98
15 сағат бұрын
Are the bottom fans installed as exhaust?? Isn't that gonna make the GPU starve of air?
@ASUSPRNorthAmerica
11 сағат бұрын
Fans are not required for the AP201 it is partly aesthetic but can be functional in our testing even with a card like a 4080 due to the high passive airflow of the chassis you do not require to have fans install for stable operation ( whether they are intake or exhaust ). Overall it is a fairly moot point and for most AP201 builds will be more aesthetically driven than a requirement to ensure stable/cool operation.
@didamnesia3575
16 сағат бұрын
I love these build videos Paul. Yours are the best on youtube and have used them as dulcet tones in the background when i build.
@DaVinciFry
Сағат бұрын
Sweet build!
@drunkenfarmerjohn42
10 сағат бұрын
The Prime case is such a good one. Though, it's worth noting that it's a badge branding. It's actually an Antec case.
@robertg6019
13 сағат бұрын
I'll stick with my 3070. I don't want to have to worry about melting graphics cards and/or fires in my case. I'll upgrade if they ever find a solution to the problem and its been safe for a couple of years.
@hasanmich1504
11 сағат бұрын
Beautiful build!! Those cables arent sleeved though, theyre just rubber moulded to look like that
@puddleduckist
11 сағат бұрын
What a fantastic compact pc!!! Runs very well!
@jbarker98420
8 сағат бұрын
Nice build Paul
@mikeoleksa
7 сағат бұрын
I really like the aesthetics of the Asus Prime motherboards, now that graphic card and case, too. Especially the ASUS Prime X670E-PRO WiFi from the last generation. It had just enough bling with all the heatsinks covering a good portion of the motherboard, but without the gamery Asus slogans pasted all over it. They just don't tick all of my specification check boxes. I wish they were higher in Asus' product stack. As for that longer mounting screw problem, you wouldn't believe the amount of 35mm x M4, M3, and 1 3/8" x 6-32 screws I've bought from Amazon just for the issue you had with the fan thickness. Another workaround I found is when the corners are open, like the TUF fans in the video, I'll mount the fans using the inside hole, instead of through the entire thickness of the fan. The shorter screws can usually be manipulated into the space and grip the radiator. Then I just run the screwdriver through the top hole to get to the screw head to tighten the fan down.
@lysias55
15 сағат бұрын
Cool to see a smaller build
@r9delta104
15 сағат бұрын
I really like the look of the case. The mesh looks great
@user-sw7js4jw7v
15 сағат бұрын
Really nice little SFF build there, Paul
@_Turbocat777
15 сағат бұрын
This is a really nice case at a decent price, I was looking for a smaller case and ended up getting the G.SKILL LT1 (35L) and this is slightly smaller than that. Finished build looks sick, been wanting to upgrade from my 3600 for awhile.
@calebintal806
12 сағат бұрын
I love smaller form factor lately, nice card too!
@Razear
6 сағат бұрын
"...in case you haven't seen this case before." I feel like there was a missed opportunity to drop a pun.
@paintintsill9355
16 сағат бұрын
21min unskippable ad
@Celis.C
16 сағат бұрын
ublock origin blocks it all. Strongly encourage using it for internet safety.
@Jzwiz
14 сағат бұрын
@@Celis.Che meant the video itself
@Celis.C
13 сағат бұрын
@@Jzwiz Oh, that somehow completely blew by me xD
@Crimsonoverlord.
12 сағат бұрын
take the triangle rubber gromets out completely, on both sides of the fan
@Lukiel666
11 сағат бұрын
Yep. Scrolled down looking for this comment.
@ClaudioBarroso
15 сағат бұрын
What you guys think about a QLC SSD for a boot drive? Technology is there yet?
@BrianScotland
11 сағат бұрын
Some people watch “satisfying” videos. This is brain butter melting on my toasted mind
@enire8477
2 сағат бұрын
Surprised that meets electrical standards with the 120 volt cable running inside the case like that.
@plumbthumbs9584
12 сағат бұрын
excellent!
@killerbsting1621
16 сағат бұрын
Just built a new one for myself. 7950x3d 4080 super 64gb trident 6000mhz. 1000 platinum corsair psu.
@Vikturus22
12 сағат бұрын
Man I could use this system for my upgrade! I am looking at upgrading at the moment from a 8700k and 2080 super.
@MahbubVai
11 минут бұрын
Wow such a beautiful pc build 😍
@katry5555
7 сағат бұрын
Thanks nice combination
@Lenticular67
16 сағат бұрын
This is awesome Paul!
@pixelpusher3589
49 минут бұрын
thanks for the vid Paul :D
@Dubravkuh
15 сағат бұрын
Let's goo!! Love the giveaway build videos Paul👌
@BBSIII
14 сағат бұрын
Nice work!
@Kawiza
14 сағат бұрын
RGB makes it go fast!!!!
@logangrmnr
16 сағат бұрын
Really like the Ap201 case. Have 6 of them for in office builds
@socaldayve6684
14 сағат бұрын
sweet build
@estebangardila
6 сағат бұрын
I just wanna thank Paul for the chance to win this PC. Fingers crossed so I can replace my 3rd gen core i5 laptop. 😅
@MeepMeep88
16 сағат бұрын
We Still Remember What you did last summer... ASUS lol... Cancel them a little longer folks, maybe it'll motivate them to give better deals $$$ lol
@richardajoy79
14 сағат бұрын
I like the case, just wish it had some walnut... wood seems to make any box look better.
@jamespurvis8880
9 сағат бұрын
Very Nice!
@pointvector1951
14 сағат бұрын
In three generations, Nvidia has added a whopping 1gb of vram. The definition of progress!
@FiveFiveZeroTwo
15 сағат бұрын
Isn't the PCI-E 5 slot connected directly to the CPU, that way still making it preferable to use first for the SSD?
@drunkenfarmerjohn42
10 сағат бұрын
Yup. Generally, even if you aren't using the full bandwidth, you want to put the main drive there. Because even if you get a faster drive and populate that slot, if your OS is still on the slower drive, that will bottleneck.
@mindurbusiness-b3u
16 сағат бұрын
78-80c seems a little on the warm side no? at 80% fans and ultra settings my 7900xtx sits at 60-65c and my aorus 4080super sits at 55-65c.
@oswaldjh
12 сағат бұрын
3:07 So that's what a memory hole looks like.
@NikoStark1
3 сағат бұрын
Hey Paul, you wanna ask Asus do they wanna sponsor a PC rebuild for me. Still using their Asus Z77 Sabertooth with i7 3770k 🙌. Yes indeed, a 2012 build!
@ChaosXification
15 сағат бұрын
Been thinking about doing a new build as well, might do a small FF build
@J-B-Good
3 сағат бұрын
I do like 3 button reverse fan blades blowing the wrong direction 😅
@Nektopoulo
10 сағат бұрын
Nice down tempo drum and bass riff...
@raze2400
16 сағат бұрын
Are we trusting Asus again?
@812MSS
15 сағат бұрын
Nope.
@LooKingG00d
14 сағат бұрын
I feel like small pc are where it's at asnit is much more flexible with the table space. But also you need to pay a lot extra if you go microITX or smaller. Full ATX is also more expensive with the eztra features. So I'm always interested in the smallest possible mATX one can build (got 1 of my own too although not smallest possible).
@Pratalax
13 сағат бұрын
You put reverse blade fans in the bottom in a non-reverse fan config, so those fans are actually blowing away from the gpu fans...
@Myque1981
16 сағат бұрын
Nice build.
@itsdeonlol
8 сағат бұрын
W PC Build video!
@finalmage6
16 сағат бұрын
Ah, a PC build! I think I remember how these work 😀
@MartinParkes
16 сағат бұрын
Nice that you mannaged to overlook ASUS being so tight lol
@HanSDevX
15 сағат бұрын
Here's hoping that I get picked for this PC :)
@ritualj0int
2 сағат бұрын
Nice looking built for sure 🥵
@mOnocularJohn
10 сағат бұрын
Man, I hope I win this. My friend needs a computer. I was hoping to help her get one and build it for her until everything went to hell in a hand basket when my mom fell and wound up in a home. This is pretty much exactly the specs we were looking at too.
@allenblackman6333
5 минут бұрын
@9:22 he could have taken a dremel and cut off the top mount of the fans and then used shorter screwed to mount the fans
@morenoise8086
7 сағат бұрын
Great video
@rangersmith4652
16 сағат бұрын
Come on, Asus. This has a non-Asus CPU, non-Asus RAM, and a non-Asus system drive. Why haven't you gotten around to negotiating a licensing agreement for those things yet? EDIT: I do like this case, though. I hope mATX succeeds in making a strong comeback (it seems to be trying).
@paperitgel98
15 сағат бұрын
How do you get ASUS CPU?
@mjc0961
15 сағат бұрын
RAM and SSD, sure. But who do you expect is going to give ASUS a licensing agreement for CPUs?
@rangersmith4652
15 сағат бұрын
@@paperitgel98 You don't. I simply poked a little fun at the idea of an all-Asus PC.
@MycoTao
4 сағат бұрын
Would love to upgrade to a 4070 ❤ thanks for the chance
@teknastyk
13 сағат бұрын
i now know why i allways kept those small wires that came on cables and such. or own a pack of small zipties. saved my ass a couple of times. you can always buy longer screws once the holydays are over and shops reopen :D
@ErgosProxy
9 сағат бұрын
It looks so clean with all that power under the hood! 🥹🔥
@Fubetuck
9 сағат бұрын
Assuming an identically spec'd rig, what air-cooler would you slap in there?
@Dracossaint
13 сағат бұрын
9:20 why not remove the rubber from the side your drilling? the part touching the case and the aio is still going to be dampened by the other pad. it might be enough bite with just that tweak. also as ya mentioned longer screws >.>
@PurpleHeartVR
14 сағат бұрын
After seeing 5:30, I can't take your videos seriously anymore. You can run a gen 4 NVME on the top Gen 5 slot without any issues as long as it doesn't eat up lanes from the x16 slot for the GPU below. It doesn''t waste anything by putting it there and it will have the best access and cooling by putting it in the top slot.
@JeffWaynee
13 сағат бұрын
Mid 70's is pretty high for a triple fan 4070 super. I have an Asus Dual 4070 OC and it never goes above 65c
Пікірлер: 249