It’s always cool to see the thought process behind all the custom stuff. I wondered how you guys mounted the bed without the floor and you guys left in the video bits and pieces of how you mounted it. Nice work guys 👍🏽
@SalvagetoSavage
3 ай бұрын
Thank you!
@luisalbino7799
3 ай бұрын
Saludos desde Puerto Rico 🇵🇷.Hermoso trabajo el que hacen impecable 👍
@oldblueshhrchannel1847
3 ай бұрын
Great job , Mike and Andrew! Thanks again for your information and your time! Last chemotherapy was last Wednesday! And now 5 1/2 weeks of radiation treatments! Yay!
@SalvagetoSavage
3 ай бұрын
Hell yeah! Hope you're feeling a bit better!
@joesilvasr9733
3 ай бұрын
Congratulations 👏👏 i
@giantpune
3 ай бұрын
For that 12 bolt pin, I just did one like that in my C-10. The little keeper screw can break over the years just from stress. Sometimes you get them out with a lefthanded drill bit. I drilled through the end of the large pin to get to the broken piece small retainer screw. I went back in with an eaton truetrac and set of yukon gears, bearings, and shims. 10/10, would recommend.
@SalvagetoSavage
3 ай бұрын
We'll definitely check that out when we rebuild it!
@NeverLetOff
3 ай бұрын
Yes! You guys build some of the best C10!
@SalvagetoSavage
3 ай бұрын
Thank you so much!
@frankosauto
3 ай бұрын
Wow, I'm really digging that GSI Kit... and that Plasma table is Super Productive! GREAT work guys! Looking fantastic so far!
@jimmyortiz4113
3 ай бұрын
No right buddy or wrong right the muffler the closer the back took it off said that the short bed don’t put it there no oh no no no put it. I need to take it off the show bed the window down there that sound good.
@jadebrecks
3 ай бұрын
I really enjoy watching this channel! Its great to see projects from start to the youtube swear word finished. Too many channels start but never finish anything!
@SalvagetoSavage
3 ай бұрын
Glad you like them! We got a few big projects we've started prep on, but we wanted to close out our episodes on the Continental and the Chevelle before we start showing you guys any new big projects!
@Mrc-vy7cn
3 ай бұрын
Amazing work
@SalvagetoSavage
3 ай бұрын
Thanks a lot 😊
@jessethompson1545
3 ай бұрын
You guys did a phenomenal job on this!
@SalvagetoSavage
3 ай бұрын
Thanks!
@LuisRamirez-ts3rp
3 ай бұрын
My savages Happy Fourth July to y’all and the families
@SalvagetoSavage
3 ай бұрын
Happy 4th Luis!!!!
@BiggChris1972
3 ай бұрын
I love your videos you guys do awesome work maybe you can make longer videos
@SalvagetoSavage
3 ай бұрын
We could, but we'd rather have shorter episodes full of work and info, rather than longer episodes stuffed with filler and nonsense!
@bazilwreckerloughead
3 ай бұрын
I bet 'the customer's' going to be really impressed with this when you guys are done with it!
@davekeogh
3 ай бұрын
Another great episode boys, keep up the good work.
@SalvagetoSavage
3 ай бұрын
Thanks!
@LumenateTV
3 ай бұрын
coolest compressor mount ever.
@SalvagetoSavage
3 ай бұрын
It really is! Thanks 🙏🏻
@lowtidecustoms1166
3 ай бұрын
Build is going to be so sick!! P:in stuck no worries Just put a 7 inch cutoff wheel on a 4.5 grinder and get it out!! hahaha
@royalprince10
3 ай бұрын
Sick work! 🔥
@SalvagetoSavage
3 ай бұрын
Glad you like it!
@gkanderson92
3 ай бұрын
Looking good guys.
@SalvagetoSavage
3 ай бұрын
Thank you!!
@jrewing8012
3 ай бұрын
Man I fell like you could have tacked a nut to that pin then a slide hammer it out cutting the carrier is crazy lol I guess if uprading everything not a big deal ha
@SalvagetoSavage
3 ай бұрын
Everything is getting replaced anyways so it was just easier to cut it all out
@JenzRock
3 ай бұрын
Killer. That’s my kind of truck.
@SalvagetoSavage
3 ай бұрын
Glad you like it!
@jslane41
3 ай бұрын
Seeing Mikey in long pants and boots is really throwin' me off. 😅
@truckloadslim
3 ай бұрын
🔥🔥🔥🔥
@Vaino_Hotti
3 ай бұрын
When speaking of truck beds, the front of the bed and the back of the bed mean the same thing, funny.
@albegt98
3 ай бұрын
👍💪
@xxJBONDxx
3 ай бұрын
what size angel are yall using for the floor? Is that 2x2?
@CrankAddict
3 ай бұрын
Has anyone ever lowered a truck using portal axles mounted upside down? It seems like you might be able to get more use of the truck bed if you did this (the differential wouldn't protrude as much into the bed).
@masterg8189
3 ай бұрын
💪👊👏
@AlosakaHopi-k1q
3 ай бұрын
Like very much
@SalvagetoSavage
3 ай бұрын
Thank you!
@Adee4750
2 ай бұрын
Is that 4 link bolt on
@SalvagetoSavage
Ай бұрын
It's welded onto the axel and then the frame end is bolted in
@wimvdweerdhof2802
3 ай бұрын
Is that axle upside down?🤔
@racer67
3 ай бұрын
Wish i had that bed floor u cut out! The floor of my bed is rusted to hell.
@SalvagetoSavage
3 ай бұрын
It might still be up for grabs if someone hasn't bought it yet
@Posibrian
3 ай бұрын
Yo! Where has Dave been?! Hope he’s still part of the familia!!
@SalvagetoSavage
3 ай бұрын
Dave is here brother, you’ll see him next week. 🙏🏻
@Michael666CA
3 ай бұрын
My 82' S10 is static drop. No C-norch and no real reason for a raised bed floor, other than so people will stop asking for me to haul shit, 💪🏽🤣💪🏽🤣💪🏽🤣
@Mike-qp8bv
3 ай бұрын
All of my trucks are lifted because I am a hardcore 4 wheeler. That being said, what do you mean by a "static drop" ?
@Krulliee
3 ай бұрын
Fueling the truck in the bed is dangerous, because the fuelvapours can’t escape. One spark and you’ve got fireworks.
@SalvagetoSavage
3 ай бұрын
Well there is a vent, also the bed is completely open at the bottom. Plenty of ventilation
@joesilvasr9733
3 ай бұрын
Dang. How long did it take just to cut the carrier out of that rear end. Always fun tomfollow a HACK 😡
@SalvagetoSavage
3 ай бұрын
Make sure to tag us in a video of you working on your build to show us how it's done!
@robbiebarbhoughton2447
3 ай бұрын
Hey can kiwis enter to win? It’d be criminal if we couldn’t.
@lt4malibu
3 ай бұрын
Guys... your rear is upside down..
@johnbridgestone9633
3 ай бұрын
I'm not sure if I'm seeing what looks like the rear sub frame, isn't far enough forward' or if it is just the angle of picture taken, but if you follow the arch of rear suspension it looks like it will run into the frame rails, maybe it's centered, it's just hard to tell from this angle, the build looks great so far, keep up the good work.
Пікірлер: 61