A pure artist, craftsman and an athlete! I am impressed! I hope to raise my kids to be like this man!
@fredtatch1572
10 ай бұрын
Beautiful project execution, well done! Looks like bliss on the water😺
@noelhutchins7366
5 ай бұрын
that was amazing: I don't know how to make tiny golf-ball-dimples or the opposite convex-bumps but both make a massive difference releasing surface-tension-drag, even prevents cavitation; you just have a super-dynamic hydro-engineering-surface to play with.
@andrewnicholson4689
5 ай бұрын
Most amazing my friend- modern man creating and capitalizing on the ancient art of the wind and sail... fascinating.. your sea forefathers would be in awe, at the skills and materials you use. Superb video!
@lomicwind
8 ай бұрын
Very nice build video, and the result on the water seems good too !
@charlesblithfield6182
7 ай бұрын
Awesome work. So cool to get to see you use it.
@clayisland
11 ай бұрын
Very cool, I love the way you put the curve in the wings, first time seeing that method. Thanks.
@HANDIY
11 ай бұрын
Thanks, I'm a fan of you videos as well!
@richarddavies-scourfield8413
7 ай бұрын
That is a superb piece of work, been planning something similar. Better get on with it now!
@MrEMann-io1ut
11 ай бұрын
You do beautiful work.
@alexanderturl
9 ай бұрын
Outstanding job mate! The front wing looks like the new axis spitfire……but you were first. 👍
@GabrielPHahn
9 ай бұрын
Looks like a futuristic WWII's Supermarine Spitfire
@Streamcatcher
9 ай бұрын
Great design and great music
@Luigik99tv
Жыл бұрын
Really great project good work !!!
@Gritzian777
6 ай бұрын
Как это круто и красиво!!! Удачных вам заездов!!!
@princedemiterios2488
7 ай бұрын
Amazing , What a Perfection !, all the best .
@trumpsucks2290
9 ай бұрын
wow! what a beautiful piece! awesome craftmanship! it looks like a p51 mustang fighter plane.
@lomicwind
8 ай бұрын
It looks more to a Spitfire to me with the elliptical outline :)
@trumpsucks2290
8 ай бұрын
@@lomicwind you might be right.
@lrowlands53
10 ай бұрын
Great video. Thanks.
@Kingboards
4 ай бұрын
Nice job !
@johnashworth2679
9 ай бұрын
Excellent video, like the music too.
@j.f.c
9 ай бұрын
Really nicely done, makes me want to give it a go. Would this be heavier than other foils, does weight matter that much? I've never tried foiling.
@helis9019
4 ай бұрын
Very interesting, well done.
@FeralRabbit
10 ай бұрын
I’d be interested in airfoil selection, shape selection, sizing, for both main wing and canard, how to decide on/set stall incidence for canard as well. Composites are such awesome materials.
@unknown121290
8 ай бұрын
I am as well I’d love to design one of these from the ground up in cad and test in ansys fluent
@johnhall7475
7 ай бұрын
I'd love to build molds to duplicate a high-performance model for mass production. I was in aerospace tooling, carbon fiber and epoxy; this would be so fun to duplicate by the hundreds.
@branni6538
6 ай бұрын
It's essentially a spitfire/hurricane!
@johnmarkgatti3324
9 ай бұрын
Great build ,nice workman ship , the eye and skills can do what cnc can do ,and actually for flow/fairing hand sanding with a form following inner may be better than any cnc . I have made foils with ply ,for windsurfers ,and surfboards [ starting in late 70s ] , the laminates give you a great picture of the foil shape and a way to replicate both sides . You could possibly do a set of plans , material list , profiles etc ?.
@HANDIY
9 ай бұрын
Thanks for the message, seems like we share the same love for plywood and potential of hand shaping.
@donlawrence1428
10 ай бұрын
dude what a job! i build model airplanes, this blows me away! u need a cnc and 3D CAD/CAM s/w to shape that wood core.
@JavierChiappa
9 ай бұрын
Most efficient Hydrofoil... turn out to be just a spitfire
@alithomaga
9 ай бұрын
thanks dude to show up your back kitchen and than see your creation. 👍
@pisoiorfan
10 ай бұрын
What is that slit in the beam for? (seen at 4:54) Edit: NVM, I got it is a mounting point of the vertical foil-shaped mast.
@davidlee50
9 ай бұрын
Took Mechanical Drawing at the JC. Good Job!
@robertokiilljunior8566
8 ай бұрын
Can the hydrofoil be adapted for a kayak?
@brentfrank7012
10 ай бұрын
Impressive
@antonmaier2263
Жыл бұрын
thanks for the inspiration
@mark6302
10 ай бұрын
that's awesome
@CasseoFM
7 ай бұрын
What's that track playing at the end video?
@user-lj2xj5mr6i
4 ай бұрын
Супер видос,супер музон!🤝🌲🍾🥂
@joelcordier6762
9 ай бұрын
Everything is nice. Thanks for those few minutes of dream. One thing I don't really see is if the last fiberglass covers the leadins and trailing edges. I was scared that the coats delaminate à joining point. Cheers,
@HANDIY
9 ай бұрын
I stopped using fiberglass in my recent builds, I just add an extra carbon layer to have something to sand into for the final sanding before the hotcoat. There is an overlap of between the top and bottom lamination at the leading edge, the trailing edge dosnt but there is a decent edge of carbon and epoxy before the wood, haven't had an issues so far. Cheers
@maitagabigabi9595
11 ай бұрын
¡Gracias!
@dimbo3397
2 ай бұрын
Una consulta que grados les das a las alas delanteras y traseras
@MyGreenTimeMachine
9 ай бұрын
Foot straps ?
@yasamogu
6 ай бұрын
Шикарный вид!
@thechronicsurroncouple6912
4 ай бұрын
Cool build. Sounds like Alan Watts playing in the background👏 How does it work?
@robertstark3326
9 ай бұрын
Great craftmanship. After you shaped the wing using those screws, what kept the shape after you removed it from the baseplate? Did you steam it or something like that?
@HANDIY
9 ай бұрын
The 2 layers of plywood making up the wing stay in this curved shape once the epoxy cures, it will give back a little once the screws are removed, but 90% of the curve will stay.
@FTheG
7 ай бұрын
masterpiece
@bartek_galazka
9 ай бұрын
Wonderful job! What is approximately cost of materials for this wing + mast?And how did you now exact shape of the wing and mast? Do you have any template or you just measured some factory produced one to mimic the shape?
@bartek_galazka
9 ай бұрын
I have just seen the cost in the latest video - around 50$, great. Please just tell me your idea for making the proper shape of the stuff, I assume it has to be made with high precision
@mobydick126
10 ай бұрын
Hi. Thanks for sharing. How did you select the wings profile? Are from NACA profiles? And the angle of mounting related to the longitudinal body and mast?
@HANDIY
10 ай бұрын
I eyeballed all the profiles and angles, but before that, i studied many different factory made foils on the beach. The different layers of ply's will give you all the visual info needed when shaping. I'll try and make a video about these two subjects soon. Cheers!
@mobydick126
10 ай бұрын
@@HANDIY thank. Looking forward to watch.
@bikeroadrider
11 ай бұрын
Amazing! A few questions, if ok. (1) What type of plywood? (2) what was the white material you poured into the bolt areas? (3) Carbon and fiberglass weights? Thank you!
@HANDIY
11 ай бұрын
1)4mm thick Regular non-marine plywood 2) Epoxy mixed with high density filler (West system 404) 3)11oz unidirectional 3inch wide carbon tape and 6 oz e-glass. Cheers
@bikeroadrider
11 ай бұрын
@@HANDIY Thank you!!!
@timothedorel1663
7 ай бұрын
Hey here excellent job ! Would you have tips / info on how to carve the curve of the profil ? Pure feelings or calculation ? Thanks mate !
@HANDIY
5 ай бұрын
pure feeling
@QXZ9027MKII
8 ай бұрын
God bless you Sir,,, 🤙🏼🤙🏼🤙🏼💪🏼💪🏼💪🏼💪🏼
@lavernjohnzen
11 ай бұрын
Hey man, appreciate your work, just one question, is the rear stabs flat, or is it like a tear drop shape on leading edge and flat on trailing edge, or flat on leading edge and teardrop shape on the trailing edge. Thanks a lot
@HANDIY
11 ай бұрын
The stab is a normal wing foil profile upside down. Flatter side on top and curve on the bottom.
@fdhgsdfdssdf
Жыл бұрын
Incredible work! I just have one curiosity: I see all hydrofoils for surfboards have some sort of negative camber/dihedral, what is the reason for it?
@HANDIY
Жыл бұрын
Indeed most foils have Anhedral camber to reduce roll stability, helps the foil follow when leaning into a turn.
@HansMueller661
9 ай бұрын
I think it improves the stability: a downward force is required to compensate for the kite's upward force, so its like an inverse flying plane, the v-shape of a plane serves for a stabilization, so it must be inverse v-shaped
@robertcain3426
7 ай бұрын
It's about manouverability. Passenger planes have the opposite, upward vee of the wings for stability since they are not overly concerned with manouverabilty. Fighter jets, on the other hand, have wings like these foils with an upsidedown vee because it's all about manouverability - easier to turn. Cheers
@starwolf3020
9 ай бұрын
Dude you just created a SuperMarine Spitfire for the water !!!!
@AlexanderBessalov
9 ай бұрын
красивая работа
@BichodaCaverna
4 ай бұрын
fantástico!
@reginr
5 ай бұрын
THANKYOU!!!!!!!!!!
@arrodrigues4600
15 күн бұрын
Very cool, but what materials are actually used, what wood, whats fiber?
@HANDIY
15 күн бұрын
Hey there, the building materials are 4mm Plywood, 11oz Unidirectional Carbon, High density filler, and Epoxy.
@yasamogu
6 ай бұрын
6:30 запах наверное свежий
@peetsnort
9 ай бұрын
Looks like a spitfire ww2 plane
@yougeo
8 ай бұрын
Are you shaping by eye or are you using precisely measured airfoil shapes and angles of attack Etc
@HANDIY
8 ай бұрын
all by eye
@karatery-8058
11 ай бұрын
does this foil have enough surface area for lake foiling? (wakefoil, dockstart and wake stealing)
@BukkitViper
9 ай бұрын
Probably not, it looks small. For pumping you want something with around 1700cm2 of surface area and a high aspect ratio.
@LateralThinkerer
9 ай бұрын
R. J. Mitchell ( designer of the Spitfire) is smiling down on this
@bosher11
7 ай бұрын
It's a Spitfire!
@louislu4803
6 ай бұрын
Hello, could I ask if the material used to make this can be replaced by carbon fiber board? If so, would the cost be higher?
@HANDIY
6 ай бұрын
Its a pretty good idea, you could treat the carbon fiber board just like the plywood. The shaping process will probably be tougher, but you might be able to skip lamination and just hotcoat your shape. Could be worth a try if you have Carbon fiber Board.
@louislu4803
6 ай бұрын
Thanks for your reply and help@@HANDIY
@sticky_ricebowl
9 ай бұрын
4:14 Feet for free? All jokes aside this looks really gorgeous!
@johanpren
Жыл бұрын
How did you decide on the shape of the plug?
@HANDIY
Жыл бұрын
I molded the mast base that i planned on using into the blank
@eigenewege
5 ай бұрын
i know development is hard, please try vacuum without pollution. last part of video is clean
@Monster11177
5 ай бұрын
I would like to have one.
@josebertocco5263
8 ай бұрын
eu acho que o mais dificil e subir na prancha e comecar a se movimentar rsrsrs
@lucasvanhamburg4937
Жыл бұрын
is it a sail pulling you?
@HANDIY
Жыл бұрын
I'm using a kite as propulsion
@gillesbkf4315
7 ай бұрын
Save 1 kg by replacing the wood with foam or dense styrofoam, great work
@sebastienvinchon326
9 ай бұрын
Excellent! I want to try to replicate what you did. Do you mind being contacted if I have a few questions?
@HANDIY
8 ай бұрын
Best of luck! if you leave questions in the comments i'll answer them
@Zane.Wellnitz
5 ай бұрын
Be interesting to throw a prop on it and see it fly
@herbalsriaji
2 ай бұрын
Keren ini
@podocrypto6072
10 ай бұрын
Dude, make a mold and let us know where we can buy a production piece out of it.
@rodrigosantos-sm8bv
9 ай бұрын
Isso mais parece um progeto de drone se por um motor eletrico pequeno na parte maior com elice a bateria é uma câmera adicionando três rodas leves e pequenas com controle
@DaviFilhodf
10 ай бұрын
vai vira febre
@spacecat142
9 ай бұрын
Я сначала подумал, что это планер)
@Lordcirdan
9 ай бұрын
Lleva un Spitfire bajo el agua!
@master-gr9ps
7 ай бұрын
Столько работы, много
@sulaimanachir5500
9 ай бұрын
but unfortunately I didn't find the details of the process dimensions and step by step work on it, it's too fast
@user-xu7vo6bm7o
9 ай бұрын
Я вообще подумал что это планер!)
@howard802
10 ай бұрын
The plans..
@SuperBadBoyscout
9 ай бұрын
Can you make a working Manta5 replica,please? 😊
@ipsummagnum8691
9 ай бұрын
It's a Spitfire
@llorttaf
5 ай бұрын
Spitfire hydrofoil =)
@markplain2555
7 ай бұрын
Barefoot in the workshop? Are you perhaps a fellow Ausie?
@Alex-fc7yw
9 ай бұрын
Со стороны нужно было снять, а так не видно самого эффекта
@user-yn6lh6kq2h
8 ай бұрын
Ахренеть!
@cezarmeleiro3707
9 ай бұрын
Como sou burro, achei que era um aviãozinho...kkkk
@mrchin7562
9 ай бұрын
...???
@poja82
10 ай бұрын
I wonder, can this hurt animal life? I know that surfboards sometimes hurt dolphins.
@HANDIY
9 ай бұрын
yes it can
@gfdrthjigvtyhnhyg
11 ай бұрын
This isn't a how-to it's a time-lapse
@HANDIY
11 ай бұрын
Good point, title changed, thanks for the feedback
@gfdrthjigvtyhnhyg
11 ай бұрын
@@HANDIY just add a quick audio narration
@robertbolding4182
9 ай бұрын
Perhaps you could hire him to show you how
@Xayuap
9 ай бұрын
@@gfdrthjigvtyhnhyg that would be a lang spec oriented. we have to learn from Mr Chaplin
@therctutor8100
6 ай бұрын
It was implied in the title of the video. No where did it say “how to”, it said “building” learn how to read.
Пікірлер: 129