@@TwoMooseDesign WHATS THE NAME OF THE CNC MACHINE YOU USED
@TwoMooseDesign
2 жыл бұрын
@@jorgerosas6464 ITS A ONEFINITY JOURNEYMAN
@PennYankeeWoodworks
7 ай бұрын
@@TwoMooseDesignmusic is a nice touch. Great video I’ll be following.
@markhamilton8765
Жыл бұрын
What a beautiful way to honor the memory of your grandfather!! These are a meaningful and priceless gift for your mother and uncle. Epic result!!
@ScoobySnackOG
2 жыл бұрын
I really really really want to learn how to do these, if you consider making another video on the cnc cad/cam I would really appreciate it! Amazing video as always 🤙🏼
@TwoMooseDesign
2 жыл бұрын
I’ll definitely do more 🙌🏼
@stephanforseilles
2 жыл бұрын
You can check my tutorial: Deep inlays VCarving detailed tutorial with Vectric VCarve kzitem.info/news/bejne/s49m4ICsbKmUrJg
@helderlage
Жыл бұрын
assuming mistakes and not being ashamed, not only helps those who have the same type of activity, but also demonstrates moral integrity... CONGRATULATIONS
@TwoMooseDesign
Жыл бұрын
Thanks for watching!
@Dexterbostic
Жыл бұрын
so....i fond u a few days ago. i been thinking none stop about wood. i have a few CNC tables that i been doing metal on. but just life now i have the cnc tables but no place to cut metal. but i have a large old 120year old barn that was passed on to me and my wife in the last 6 mouths. so i have been looking what to do with this cnc sutff and man i love watching you CH u have gave me a new idea with this wood stuf!!!! lol love it !
@TwoMooseDesign
Жыл бұрын
Glad to hear! You got this 💪🏼
@charlesthomas9294
2 жыл бұрын
This video does a great job of showing how CNC is not "easy" and IS real woodworking as much as someone using a table saw. The precision involved in getting all those cuts to perfectly line up is daunting, and this video showed that even someone with a good amount of experience can struggle with it. Nice work!
@TwoMooseDesign
2 жыл бұрын
Thanks! I appreciate you watching!
@Push_Start_Nova
5 ай бұрын
Killer! I like this format!!! Keep up the good work!
@TwoMooseDesign
5 ай бұрын
Thanks! I appreciate it!
@michaelkeymont501
Жыл бұрын
Awesome job! Broinwood would be proud…
@TwoMooseDesign
Жыл бұрын
Thank you 🙏🏼
@BruceAUlrich
2 жыл бұрын
These turned out so cool! And great that you could use the lumber for your grandpa for something special.
@TwoMooseDesign
2 жыл бұрын
Thanks Bruce!
@travislangendoen975
2 жыл бұрын
If you make more of these videos, especially with the good voice over explaining what is going on at the technical level (and the CAD/CAM too!) I will watch and like every single one.
@travislangendoen975
2 жыл бұрын
Also, really enjoyed the quality of the up close shots of the bits/carving
@TwoMooseDesign
2 жыл бұрын
Thanks! I’ll definitely make more, I’ll see how technical I can get, people get bored pretty fast 😆
@Dta1996
Жыл бұрын
I too really really want to learn how to do these. I make boards for family and friends as gifts. But this inlay scares me as i am afraid of the inlay failing. Help would be great! Lessons learned and cutting depth and bit choice is needed. Ill never be in competition with the pros, but family and friends will be impressed 😁😁 Please make a video and spec sheet as needed. Thanks Doug
@thesplinteredfinger
2 жыл бұрын
Yes pleas do more of this! More detail would help explain it. Maybe just one in-depth video that you could forward on to those who ask questions in the future. Love the look on these boards!
@TwoMooseDesign
2 жыл бұрын
Definitely will!
@talegunner4414
Жыл бұрын
Please add more CNC inlay work. Thank you
@TwoMooseDesign
Жыл бұрын
I’m trying! Lol I have a few coming up I’m going to record
@mmorpgenius
8 ай бұрын
Solid work! I just did my first wood inlay cutting board on the CNC. Definitely room for improvement. The way you explained the challenges you faced along the way, bits used, and your general process is very helpful!
@TwoMooseDesign
8 ай бұрын
Thanks for watching! I appreciate it
@coolerman_13
2 жыл бұрын
wow, great design! I paused the video on both boards and couldn't tell where the "oopsie" was at. great work
@TwoMooseDesign
2 жыл бұрын
Thanks! 🙌🏼
@steveward8070
Жыл бұрын
I was fortunate that the algorithm sent me to your video. Great work! I will be trying this inlay technique with my DIY CNC in the future!
@bw162
2 жыл бұрын
Very nice. One observation. Ignore it if it’s not relevant. Because of the visual gap between the plug and surface of the board, it appears you may be leaving too great a glue pocket. On cutting boards in particular, this can lead to inlay cracking. For anyone that is interested, a vacuum bag method of “clamping” is extraordinary. Very clean and no mess. Even pressure on all parts of the plug big or small.
@markhagstrom2659
Жыл бұрын
Yeah excellent job. I am very interested in learning more about inlay creation, Thanks
@dogwoodcustomwoodworks
Жыл бұрын
Can you please please please do an in depth video on the techno CNC stuff.... - All the bits needed for each particular step. - Pass Depth/Cut Depth/RPM/Feed Rate/etc. I’m brand new to the process and am trying to learn. Thank you!
@gwargolet
Жыл бұрын
Thanks for video, really enjoyed it, especially like the fact that you list links to all the bits and tools you used. Looking forward to more of your videos in the future
@JeremyCarnahan
7 ай бұрын
Thanks for sharing all the mistakes. This process can be challenging at times. Keep it up!
@TwoMooseDesign
7 ай бұрын
Thanks for watching!
@erikpaul2550
2 жыл бұрын
Those turned out amazing! Nice work. You're the only one who sees the mistakes!
@TwoMooseDesign
2 жыл бұрын
You’re probably right! I just like to show them so people know everything isn’t perfect and it’s okay to mess up lol
@michaelmartin1835
2 жыл бұрын
Beautiful boards. I do end grain inlays myself, so I know the challenges you refer to. The slight variation from one 12.5 bit to the next, even from the same manufacturer, can leave the tiniest of gaps. Trial and error is the only method that works for me. When I see a video that says "perfect inlays every time" I cringe a little bit, but I still watch I would love to see more content like this. I plan on trying a more complex inlay using multiple species of wood, seeing you just go for it is inspirational.
@TwoMooseDesign
2 жыл бұрын
Yeeesss awesome comment, exactly! People ask my numbers for the inlays but there’s no magic number 🤷🏼♂️ yeah a lot of the videos I watched trying to learn just confused me more
@michaelmartin1835
2 жыл бұрын
@@TwoMooseDesign My favorite inlay work is from Broinwood. They make amazing boards, but don't even try to explain the bits, speeds and feeds, etc... Having another source of quality inlay work is always welcome. As I said, those are beautiful boards, and having sentimental value makes them even more special. I find it informative and relaxing to watch the process with nice background music.
@TwoMooseDesign
2 жыл бұрын
@@michaelmartin1835 I agree! I believe he puts some info in the description but yeah to the point not many details on process
@cfletcher1856
2 жыл бұрын
Looks great, keep making these videos, I do inlays using my 1F as well using a tapered ball nose bit. That has always given me the best results.
@TwoMooseDesign
2 жыл бұрын
And they don’t break so easy like those fine detail bits
@BenchGDD
2 жыл бұрын
Yes, inlay cuttingboards are great. Keep 'em coming! Thanks
@TwoMooseDesign
2 жыл бұрын
Thanks! I will
@mikedurkee7296
2 жыл бұрын
Nice work! Would love to learn more about the entire process. Just getting into the cnc world and want to learn as much as I can from folks like yourself. Thank you for sharing!
@TwoMooseDesign
2 жыл бұрын
Thanks! I’ll definitely post more inlays 🙌🏼
@Creatingme87
2 жыл бұрын
Omg! I absolutely loved watching this process! I got a CNC for my Woodshop class (high school) and I know that some of my more advanced students would love to try something like this. I would 100% be interested in seeing more of the programming side of things if you were to post that kind of content. Thank you for sharing!
@TwoMooseDesign
2 жыл бұрын
Thanks for watching! Working on another video like this now 🙌🏼
@Creatingme87
2 жыл бұрын
@@TwoMooseDesign awesome! I’ll be keeping an eye for when it comes out!
@raynelson3404
2 жыл бұрын
Great work! Glad you are able to show mistakes. Valuable learning experience for us as well.
@TwoMooseDesign
2 жыл бұрын
thanks for watching!
@benrudman3917
2 жыл бұрын
Great video. I share the same experience with the cnc Inlay work. There is nothing east about it. From digital design to toolpath generation to material prep. It’s all a challenge. I really like your style. Great video! -Ben
@TwoMooseDesign
2 жыл бұрын
Totally agree! I didn’t realize I would need to become a graphic designer 😆 thanks 👊🏼
@benrudman3917
2 жыл бұрын
@@TwoMooseDesign vectric vcarve made me feel like a computer idiot in the beginning
@TwoMooseDesign
2 жыл бұрын
@@benrudman3917 yeah lol so many buttons! I primarily use illustrator for design but same thing, it’s allllot right away
@TradeSkillersAnonymous
2 жыл бұрын
Hey Jef Awesome job and a lot of work! Re: music, I think it's better than shop sounds, and it's a good track, doesn't take away from the vibe or distract. I like these kind of in depth multi stage projects/content so I say if you like doing them, more is better. Keep up the great work! -JR
@TwoMooseDesign
2 жыл бұрын
Thanks! Yeah we have head phones on all day to block out the loud machines 😆 ill definitely do more videos I enjoy making the boards, the deep detailed inlays are complex especially when you ad multiple layers
@johnklein4558
2 жыл бұрын
They came out beautifully!!
@TwoMooseDesign
2 жыл бұрын
Thank you!
@douglassmith2055
2 жыл бұрын
Strive for simple beauty. Love your channel.
@TwoMooseDesign
2 жыл бұрын
Thanks 🙏🏼
@OakHillMillworks
2 жыл бұрын
Beast of a planer! You are nailing these inlays too. Man. Looks so good.
@TwoMooseDesign
2 жыл бұрын
Thanks! They have been whooping my but for weeks lol
@OakHillMillworks
2 жыл бұрын
@@TwoMooseDesign I have noticed! I haven’t run the CNC for two weeks.
@georgeprimich3485
2 жыл бұрын
Great job. You do some good work. Can't wait to see more. Very informative and right to the point. Wouldn't mind seeing your press. I use some hand clamps and a board to apply even pressure. Nothing this complicated. Keep it up.
@TwoMooseDesign
2 жыл бұрын
That’s how I did my first few! It’s an automotive press, sold a few boards and bought one and thanks!
@jacoblafave8164
2 жыл бұрын
Looks really good 👍
@TwoMooseDesign
2 жыл бұрын
Thanks! Learned a lot!
@RobSandstromDesigns
2 жыл бұрын
Very nice work. There is a lot to learn to this type of inlay or the multicolor epoxy inlays, but the end result is worth it.
@TwoMooseDesign
2 жыл бұрын
Agreed! And thanks
@FirstFruitsDesignCo
2 жыл бұрын
Glad to see another video from you guys!
@TwoMooseDesign
2 жыл бұрын
Thanks! Should be posting more often now 🙌🏼
@ttg5291
7 ай бұрын
Great Job!
@TwoMooseDesign
7 ай бұрын
Thanks!
@rickpouley2857
Жыл бұрын
Beautiful!
@TwoMooseDesign
Жыл бұрын
Thanks!
@CrowWood.MetalWorks
2 ай бұрын
great video I am just starting to do inlays
@TwoMooseDesign
2 ай бұрын
Thank you
@ronnorris1504
2 жыл бұрын
Really beautiful cutting boards. Thanks for sharing the video
@TwoMooseDesign
2 жыл бұрын
Thanks for watching!
@billysmether6237
2 жыл бұрын
Cut some dowel holes for alignment. Huge job. Thanks for video.
@EthanCarterDesigns
2 жыл бұрын
That's so cool how you do the inlays!
@TwoMooseDesign
2 жыл бұрын
Thanks!!
@rodneysnoddon588
2 жыл бұрын
Look great I am still not there yet but love to see more help Thanks Rod
@TwoMooseDesign
2 жыл бұрын
Thanks! You'll get there just keep practicing!
@vabearhunter401
Жыл бұрын
Totally AMAZING!!
@britneyjohnson9624
2 жыл бұрын
That was awesome. Love seeing your progress as I am working on inlays as well. Is just a really special touch. You all are amazing
@TwoMooseDesign
2 жыл бұрын
Thanks! We appreciate you following along 😁
@chadb3100
2 жыл бұрын
WOW those look awesome I'd love to see more of these
@TwoMooseDesign
2 жыл бұрын
Thanks! I’ll have to come up with some more advanced designs 🙌🏼
@DanielBulyovcsity
2 жыл бұрын
Hey! You mentioned it is difficult to center the machine. You have two option to make your life easier. First is free, always center with a pointy endmill (like your 15deg endmill). Zero X and Y then swap endmills then zero Z. Second option is to program a way in your machine to zero itself with touch probe. This may not work for every machine so you have to look into it but this is the easiest and less prone to error.
@hdl4259
2 жыл бұрын
Well done, phantastic boards.
@TwoMooseDesign
2 жыл бұрын
Thanks!!
@jeffmueller9422
2 жыл бұрын
Outstanding guys! Alot of work for a beautiful board!
@TwoMooseDesign
2 жыл бұрын
Thank you!
@jeffmueller9422
2 жыл бұрын
I have a CNC, but have never tried inlays. This is very inspiring! Thanks!
@TwoMooseDesign
2 жыл бұрын
@@jeffmueller9422 they are fun and very challenging!
@dhmphoto
2 жыл бұрын
Great job! The video is very inspiring. I look forward to the next one!
@TwoMooseDesign
2 жыл бұрын
Thanks! I still have lots to learn! It’s a fun process, I’ll definitely post more 🙌🏼
@Reign_In_Blood_963
2 жыл бұрын
I've very interested in learning how to create this process for myself. Just got my 1F CNC up and running and I'm eager to learn new ways to use it.
@TwoMooseDesign
2 жыл бұрын
Nice! That’s exciting! Inlays can be tough!
@perrynwhite7666
2 жыл бұрын
They look great! Definitely would like to see more on inlays!
@TwoMooseDesign
2 жыл бұрын
Thanks! Definitely will!
@ShadeTreeMachinist
2 жыл бұрын
For just being your second attempt cutting out these types of cutting boards you sure did an outstanding job! Enjoyed the video!! Would diffidently would like to see a video showing the process from designing in software, setting up tool paths and the the cnc machining!!!
@TwoMooseDesign
2 жыл бұрын
Thanks 🙏🏼
@bbgakame
2 жыл бұрын
Beautiful. Suggestions: Have a very stable X,Y fence or use dowels (many use pvc, I use wood dowells) that you reference in holes that the CNC drills. Zero the project at the machine zero point then go to your project zero point, RECORD the X,Y numbers. You can remove the project any time, do other work and then replace the project back in the machine using the fence, dowells, zero at your machine zero, proceed to the X,Y points you recorded earlier and you'll have a repeatable zero. Hopefully this is clear. Keep up the great work.
@TwoMooseDesign
2 жыл бұрын
thanks for the tips!
@lancedavies2472
Жыл бұрын
Just found your channel. Great work. Only one thing I would question though.... Who would ever use these works of art as a cutting board? Hope to see more. Cheers
@JeffZ137
2 жыл бұрын
very nice! Would definitely love more cnc content. Just starting with inlays too and had not thought to use a tapered ball nose bit , will have to give it a go!
@TwoMooseDesign
2 жыл бұрын
It doesn’t break super easy like the fine v bits 🙌🏼
@chrisdemeglio7983
2 жыл бұрын
Great job, love the boards and videos like this are great. Just bought an Xfinity cnc, haven't unboxed it yet or decided what software I'm gonna use but these types of boards are perfect. Thanks for sharing.
@TwoMooseDesign
2 жыл бұрын
Thanks! I use v carve pro and easel. Definitely v carve pro if you plan on doing inlays
@chrisdemeglio7983
2 жыл бұрын
@@TwoMooseDesign thanks. I bought the stand as well because I'm gonna use it in my garage shop which is small. I'll def check out vcarve. Thanks
@derekpeterson8005
2 жыл бұрын
Amazing!!
@TwoMooseDesign
2 жыл бұрын
Thanks!!
@garyainslie8200
2 жыл бұрын
your machine looks rock solid. mine struggles to do large doc. probably user error lol. your boards look amazing. you should do a series on making inlays, i would watch the hell out of that!
@TwoMooseDesign
2 жыл бұрын
Thanks! You’re probably going far to fast for your ipms not sure what machine you have, I’ll definitely make more!
@xRenegade44x
Жыл бұрын
those boards are beautiful! great job.
@grumpywoodchucker
2 жыл бұрын
Absolutely love these boards and this video. They turned out perfect. I would love more info on how you program the inlays!
@TwoMooseDesign
2 жыл бұрын
I’ll definitely have to make like a beginner guide, most of the videos I watched just left me more confused than when I started 😆
@grumpywoodchucker
2 жыл бұрын
@@TwoMooseDesign #truth Thanks for helping out us beginners!
@TwoMooseDesign
2 жыл бұрын
@@grumpywoodchucker it’s harder than it looks! Not only do you have to learn the Cnc and bits you dang near have to learn graphic design lol
@Human_OU812
2 жыл бұрын
Would like to see a video on the design and how you went about in the computer. I’m wanting to try these on my CNC but have no idea where to start.
@TwoMooseDesign
2 жыл бұрын
I definitely will eventually
@calebsanz9826
2 жыл бұрын
Killed it bro. Didn’t read all the comments, but wouldn’t xyz probing solved the alignment issues? At least that’s how I’ve been doing mine. Great work though
@TwoMooseDesign
2 жыл бұрын
Thanks! and Sure it could definitely help, for me it was more so my shotty fence lol I'm not a huge fan of probes i haven't used one in a few years, i feel more precise when i do it manually. Its just personal preference though, i always recommend new users to get a probe.
@kingrichard232
2 жыл бұрын
Great video and the boards look amazing. looking forward to pushing my limits with my onefinity. Keep the videos coming.
@TwoMooseDesign
2 жыл бұрын
Doooo it! It’s a fun journey
@cecilferris1163
2 жыл бұрын
This is awesome as always, great work.
@TwoMooseDesign
2 жыл бұрын
Thanks!
@BJHermsen
2 жыл бұрын
Gorgeous work!
@TwoMooseDesign
2 жыл бұрын
Thank you!
@martinburdge8820
2 жыл бұрын
This was a joy to watch I would imagine these must have taken you 1-2 weeks to produce, The mistake you made I thought you recovered very well 👌, Love the end product please keep making more it’s very entertaining and a marvel to watch, Have you a web sight to buy things like you produce would be very interested in purchasing
@TwoMooseDesign
2 жыл бұрын
Thanks! Yes they are very time consuming 😅😅 we do have a website with products! Twomoosedesign.com let us know we can always make custom orders
@naturesliveedge9849
2 жыл бұрын
Great video!! Have you thought about using alignment dowels in the back side of the cutting board and into the spoil board? I use this concept for repeatability all the time.
@TwoMooseDesign
2 жыл бұрын
Thanks! I’ll look into that thanks
@dangoras9152
2 жыл бұрын
Looks good.... I been wanting to try and do a big inlay just haven't found the wood keep it up brother...
@TwoMooseDesign
2 жыл бұрын
Thank you 🙏🏼
@billysmether6237
2 жыл бұрын
more on inlay please. thanks.
@TwoMooseDesign
2 жыл бұрын
will do!
@vampyrew0lf
2 жыл бұрын
Dude, these turned out awesome! This is Gearsandfire btw. I'm working on another inlay currently and I can confidently say that I still haven't got it 100% yet 😃 I'm damn close. I'll post my current inlay when it's done and hopefully get your thoughts. Nice work man!
@TwoMooseDesign
2 жыл бұрын
Hey! And thanks! Lots of practice! Even the clamping part is super important
@countrysideworkshop
2 жыл бұрын
Would like to see a more detailed how to on inlays
@TwoMooseDesign
2 жыл бұрын
Definitely will!
@donaldmatthies6026
2 жыл бұрын
Very nice shop! Really nice build! I think if you do a shop tour, and explain some of your equipment and what you like and dislike about it, that would be good also! Nice job on the inlays with the CNC. Thank you for taking time to film, edit and post this video liked and subscribed.
@TwoMooseDesign
2 жыл бұрын
Thanks for the feedback! I’ve been meaning to do a tour for a while now 😅
@donaldmatthies6026
2 жыл бұрын
@@TwoMooseDesign yeah no problem! I wish you the best of luck on your adventure and wish you success.
@TwoMooseDesign
2 жыл бұрын
@@donaldmatthies6026 same goes to you!
@waterdonkey
2 жыл бұрын
Nice work!
@TwoMooseDesign
2 жыл бұрын
Thanks!
2 жыл бұрын
So nice!!!
@TwoMooseDesign
2 жыл бұрын
Thanks!
@dustytrailsworkshop
2 жыл бұрын
Great boards they are Fing beautiful. I definitely would enjoy the CAM/CAD aspect. It looks like you changed your centers when you were cleaning back the inlays, so just curious on why?(you can save that for a video.) I'd also like to hear why you'd start from a certain Inlay and how you managed to keep your Z depth consistent in the future. Enjoy your videos, love how y'all just build and discuss the project as you go, Not a typical KZitemr who utilizes on the talking head transition. I also did enjoy the howl pun, intentional or not!
@TwoMooseDesign
2 жыл бұрын
Hey! I’m not exactly sure what you’re asking. My actual zero never changed. And as for what layer to start with its pretty much personal preference as long as it doesn’t mess with any of the other layers/inlays. I’m also learning and barely know what I’m doing so a lot of it is trial and error lol
@dustytrailsworkshop
2 жыл бұрын
I'm right there with you on being green to a CNC. Maybe I'm overthinking it but between inlays... You'd be changing out bits. How can you maintain that constant z depth between your female/male/clear/female/male/clear. I tend to loose my original Z depth along the way. Then resurface the whole board.
@TwoMooseDesign
2 жыл бұрын
@@dustytrailsworkshop ohhhh I set a new z depth every carve and bit change
@sagitaire121271
Жыл бұрын
Yes I like more videos please 🙏🏻 how to video
@TwoMooseDesign
Жыл бұрын
More coming soon!
@palonso99
9 ай бұрын
Great video. Thank you for sharing. A CNC related question. When you use the tapered ball nose bit does it not taper the sides and enlarge the opening as you go in deeper ? Also I would love to see more cnc inlay content. Thanks
@TwoMooseDesign
9 ай бұрын
Yes which is why you set the flat depth to ensure it’s the same throughout. Thanks!
@John-xo3cv
Жыл бұрын
Love the CNC inlay work. Can you go more into the technical details?
@markperkins9437
2 жыл бұрын
Really nice work! I do have a question though. Rather than using a tapered ball nose bit shouldn't it be a sharp pointed engraving bit? You mentioned that you had some small gaps in the inlay. Perhaps that was because of the all nose.
@TwoMooseDesign
2 жыл бұрын
There are many possible reasons for gaps. I get great results with a ball nose. This was one of my earlier boards. Check out @broinwood he uses a tapered ball nose as well. To me the tapered ballnose are far more durable than a 15 or 30 degree v bit
@getfastfish5020
2 жыл бұрын
this board looks like a million dollars
@TwoMooseDesign
2 жыл бұрын
thank you! learned alot!
@garywilson3902
2 жыл бұрын
love watching your videos do you have a video or doing one on how to create the inlay on easel ideally. sorry if that's been asked already
@TwoMooseDesign
2 жыл бұрын
Thanks! Easel only has pocket inlays, I do these in v carve pro. Check out the apps in easel and cut a few simple practice inlays!
@garywilson3902
2 жыл бұрын
@@TwoMooseDesign I need to learn v carve then in order to do more complex inlays, thanks again
@TwoMooseDesign
2 жыл бұрын
@@garywilson3902 correct, it’s more forgiving with the tapered plug
@joeydjoe
2 жыл бұрын
When you’re running your carves do you run your clearing passes first and then your Vcarve last?
@TwoMooseDesign
2 жыл бұрын
Doesn’t matter to me, if the v bits in there I’ll run that first but typically I’ll run the upcut first. Haven’t noticed much of a difference at all
@Epoxy-Inlays
2 жыл бұрын
I also would like to learn how to do this inlays. Specially the design I think you do in a vectric software. The depths of the plugs for example. But show the whole process please.
@TwoMooseDesign
2 жыл бұрын
I definitely will! Thanks for watching
@tk.designs
2 жыл бұрын
These boards look amazing, whether first attempt, or if you had years of practice with the inlays. I like that there is a little bit of sapwood in the walnut gives it a nice little contrast. What are the other types of wood that you used? I am still learning myself, and want to expand the types of wood that I use. Great Job!
@TwoMooseDesign
2 жыл бұрын
I agree I like a touch of sapwood 👌🏼 thanks for watching!
@charlesthomas9294
2 жыл бұрын
So, do those larger planers eliminate snipe, or is it about the same as the DeWalt 13"?
@TwoMooseDesign
2 жыл бұрын
It’s definitely better as it should be at 4x+ the cost of the dewalt. You can adjust the rollers and feed drivers to eliminate snipe
@CaseySS423
2 жыл бұрын
These turned out great. I have tried twice for endgrain inlays. First one shifted on me and the 2nd the glue never dried(impatient). Would love to see/heard some of your settings for the tool paths and setup
@christiantardieu7561
2 жыл бұрын
Do you clamp the plug or it’s not needed?
@brasswell1
2 жыл бұрын
Can you do more A to Z on the CNC side of things . Thanks
@TwoMooseDesign
2 жыл бұрын
What do you mean?
@TheWoodPastor
2 жыл бұрын
I want to learn alongside you.
@TwoMooseDesign
2 жыл бұрын
You got this, just need to practice a little. I’ll be waiting for that Texas inlay
@mooseguinn6905
2 жыл бұрын
@@TwoMooseDesign what kind program do you using ?
@TwoMooseDesign
2 жыл бұрын
@@mooseguinn6905 I use v carve pro
@mancandy8964
8 ай бұрын
목공은 역시 장비빨,,,
@lagger551
2 жыл бұрын
Butiful work. I would love to se more like this. And also see how you build op the file. What program do you ues
@TwoMooseDesign
2 жыл бұрын
Thanks! I use V carve pro to create tool paths
@nancej100
Жыл бұрын
Thanks, would love to learn how to make inlays, do you have any videos show settings. Thank you again
@johndolleslager1270
7 ай бұрын
Do you have a detailed video about how to do the inlay? On the software side? Thanks in advance.
@gunracksonline
2 жыл бұрын
very nice work. Inlays are on my list to do but have not gotten the time to do them yet. Question when you are zeroing off the center, why are you not going from the corner so every time you have to remove the board and put it back on the bed the reference point will always be the corner?
@TwoMooseDesign
2 жыл бұрын
I just prefer the center 🤷🏼♂️ I never liked using the corner, no real reason
@g_rad111k6
2 жыл бұрын
What game controller are you using for your cnc? Does it work well? I have yet to see someone use one.
@TwoMooseDesign
2 жыл бұрын
It’s a onefinity thing, and it’s an x box control. It’s amazing for moving it around and setting zero. I don’t know how to do it with other machines 🤷🏼♂️
@glennbrunson3406
2 жыл бұрын
These came out amazing. Great work! I'd love to see more like this! Doing inlays is something I would love to start doing with my 1F. I haven't been able to find any good tutorials. Any recommendations?
@TwoMooseDesign
2 жыл бұрын
Those videos are tough to digest, most of them are pretty confusing. I learned from broinwood. He also just put out a course on getting a good inly fit. I’ll do one eventually but I really want to “master” it before I do anything in depth.
@PeterGross-co7vr
Жыл бұрын
Why didn't you do all the carving on the walnut board at the same time so there was no shifting? Thanks!
@TwoMooseDesign
Жыл бұрын
It makes gluing all the pieces a lot easier. With the different wood types you would run into a bunch of problems and it would be hard to tape or mask off areas so glue doesn’t get in the areas not being glued.
@PeterGross-co7vr
Жыл бұрын
@@TwoMooseDesign Got it. Thanks. And very nice result!
@keithdavenport7009
2 жыл бұрын
Sorry I haven't watched this before, Its amazing!! I love the art is it available from you?
@TwoMooseDesign
2 жыл бұрын
I bought the file on Etsy, then I redrew most of it so it would work with the inlay, it’s not something I can really sell.
@keithdavenport7009
2 жыл бұрын
@@TwoMooseDesign can you point me to the original Esty file? I'd be willing to purchase it and possibly re- work as well. I really like what you did with it.
@martinburdge8820
2 жыл бұрын
I love the boards they looked fantastic, The question I have do you sell them on a web sight, Plus yes it would be great to see more boards made like this.
@TwoMooseDesign
2 жыл бұрын
That’s a very complex question lol learning to sell items is generally a lot harder than learning to make them
Пікірлер: 265