Round two folks! This time we run you through the entire process of importing the guitar body 3d model into carve, getting your file set up and carving into a sweet chunk'a wood! Follow along a we share lots of tips and tricks to make your co guitar journey a rockin' success.
At the end of the day...Nevermind
Chapters:
00:00 Buying Supplies
03:00 Guitar Video 2 Intro
04:00 Onshape File Export
05:50 carve Import
07:50 Setup
09:25 2 Sided Carving Buttons
12:30 Limit Planes
17:40 Adding 3D Tabs
25:00 Lets Talk About Indexing
26:45 Creating Index Holes
33:00 Creating the Roughing Pass
40:15 Finishing Pass
49:35 Saving Toolpaths
52:14 Backside Setup
54:38 Creating Index Holes
57:19 It's Getting Rough in Here
59:47 Reaching My Limit(Plane)
1:02:52 Finishing Pass
1:04:20 Tab Vector Toolpath
1:10:40 Offsetting Body Vector Toolpaths
1:26:30 Take a Breath
1:28:06 Onshape Guide Vector Export
1:29:18 carve Guide Vector Import
1:33:20 Ferrule Holes Math
1:53:05 Neck Plate Refining
2:02:55 Saving Toolpaths
2:03:52 Carving Setup
2:16:13 Let Us Carve!
2:23:50 Flip It. On the Back!
2:31:10 Moment Of Truth
2:33:15 Chop and Sand
2:34:40 Thanks for Sticking Around!
Project Files:
rb.gy/9rylxd
Onshape
rb.gy/osqdyk
Bits used in Parts 2 and 3:
Sienci 1/8" Downcut End Mill
sienci.com/product/1-4-spiral...
Sienci 1/8" Upcut Ball Nose End Mill
sienci.com/product/18-balinos...
Sienci 1/4" Upcut Ball Nose End Mill
sienci.com/product/1-4-balino...
Sienci 1/4" Downcut, End Mill
sienci.com/product/1-4-spiral...
Sienci 1/8" Precision Collet for Makita RT0701
sienci.com/product/1-8-precis...
Feeds and Speeds:
cuts2.com/tPEDf
Check Out Our Feeds and Speeds Tables!
resources.sienci.com/view/Imk...
Helpful Fret Spacing Links:
FretFind2D
www.ekips.org/tools/guitar/fr...
StewMag
www.stewmac.com/fret-calculator/
Fret Install Mastery:
www.gunsandguitars.net/
Materials Used:
Body and Neck: Black Limba.
Body blank dimensions: 383mm × 427mm × 44.5mm (15.0787in × 16.811in × 1.752in)
Neck blank dimensions: 80mm x 735mm x 25.9mm (3.1946in x 28.937 in x 1.0197in)
Fret board: Black Ebony
Fret board blank dimensions (before surfacing): 69.4mm × 613mm x 10.9mm (2.73in × 24.125in x
0.43in
Sand paper:
120, 180, 240, 320, 400 grit random orbit and hand sandpaper
Guitar Parts Links:
Pick ups, bridge, selector, jack, tuner keys, neck plate, strings:
rb.gy/uyqyx8
Fret wire:
rb.gy/cghwkp
Ferrules: (Mine are black, but they don't seem to be selling the exact same ones in black at the time of posting this rb.gy/hogo5k
Nut:
rb.gy/pwz6cp
Truss Rod:
440mm version
rb.gy/xeay5g
Pickguard:
rb.gy/tm250w
Fretguru Dagger 2.0
rb.gy/cnaf54
Fret rocker/gauge: (a nice to have, but not necessary)
rb.gy/ayaeh4
Fret trimmers: (I already own a pair of flush cut end trimmers, so any pair similar to these should work)
rb.gy/3pexhz
Other Supplies and Materials Used:
12" long 3/16" Drill bit:
rb.gy/u3knjy
1" Aluminum tube for sanding:
rb.gy/nqqyb3
Sandpaper for aluminum bar:
rb.gy/nqqyb3
Crazy glue & accelerator, painters tape, red sharpie (just not black),
Know the new AutoZero Touch Plate
sienci.com/product/autozero/
Know the Starter End Mill Set
sienci.com/product/sems/
Know the Sign Makers End Mill Set
sienci.com/product/sign-makin...
Know the 3D Carver End Mill Set
sienci.com/product/3d-carver-...
Know the Machinists End Mill Set
sienci.com/product/machinists...
Know the LongMill MK2
sienci.com/product/longmill-mk2/
• Resources
Long Mill Resources Page I Sienci Labs
resources.sienci.com/view/lm-...
// FEATURED TOOLS & SOFTWARES
•Softwares
gSender | Sienci Labs
sienci.com/gsender/
Vectric V-Carve Pro V11
sienci.com/product/vectric-vc...
Vectric V-Carve Desktop V11
sienci.com/product/vectric-vc...
Carveco Maker
sienci.com/product/carveco-ma...
• LongMill Add-ons
Dust Shoe I Sienci Labs
resources.sienci.com/view/lm-...
TouchPlate I Sienci Labs
resources.sienci.com/view/lm-...
Checklist Poster
bit.ly/checklist_LongMill_Sie...
// PROJECT IDEAS
• resources.sienci.com/view/lm-...
// JOIN US
• Facebook Group | / mill.one
• Instagram | / siencilabs
Hashtags:
#LongMill #Sienci #CNC #touchplate #autozero #gender #train #DIY #Maker #gift
Негізгі бет Building a Guitar on a CNC - Part 2: The Body
No video
Пікірлер: 34