So impressive that you are doing all of this on your own. Getting anything to work is hard and you are getting this huge project to work. impressive!
@vinayakjadhav1719
5 жыл бұрын
Your videos are so clear and knowledgeable that I wish you make videos more frequently.
@flyaway7169
5 жыл бұрын
So excited, always shocked , inspired by you sir!
@danielmartuniac9928
5 жыл бұрын
Really amazing. Your videos helped me to graduate college and take my bachelor degree.
@Joop_Brokking
5 жыл бұрын
That is great to hear :-)
@AppliedMetaphysician
5 жыл бұрын
Hello "Stranger"! :) So good to see that you are well; and still MAKING!
@robertparenton7470
3 жыл бұрын
Thank You! Just finished the build and worked on it for 1 month. Took some time to get all the parts in. Now I have better control over my stock of parts. Upgrading the STM32F1 to STM32F4.
@divyanshu_harkhka
5 жыл бұрын
After soldering and cleaning of PCBs I always coat both the sides with 2 layers of conformal coating. This prevents the PCB from dust and moisture and ensures no water damage just in case. Also, it gives a nice shiny look to the board. A great and informative video as always. Just wonderful.
@puriap250
5 жыл бұрын
Amazing as always. I really admire the effort you put into the YMFC and how perfect it has become.
@chandravie
5 жыл бұрын
I like your videos a lot, systematically and easy to understand. Thank you.
@Avionics1958
5 жыл бұрын
A truly impressive project!. Thoroughly enjoyed every seconds of it.
@fpvrealpilot
5 жыл бұрын
You are amazing!!!! I need to update my application for your project! 🤩
@fpvrealpilot
5 жыл бұрын
@Keep Robotizing I hope it will be ready soon :)
@alfadex50
5 жыл бұрын
Mr. Brokking great time to see you around ! You done great work one more time, i have done this quad and it flies really good but i have also to make some improvements really tnxxx
@gyoosuhnjee8698
5 жыл бұрын
One month ago, I made the waypoint moving quad with your code. It was cool. And also the gcs system with Android App through telemetry. Thanks a lot! You are great !
@MrPnew1
5 жыл бұрын
Great job as usual Joop. Your work is top notch
@AlvaroPandolphousa
5 жыл бұрын
Another quality job by Mr. Brokking. Thank you for share
@HardFault0x00
5 жыл бұрын
Excellent Jobs Mr. Brokking, i really really like the position of GPS, that's cool :D Btw about auto return home, are you saving the first takeoff GPS coordinate in RAM or Flash as Home? Or saving it at controller (either in Remote or Laptop) so when you toggle the return to home switch, the controller send GPS coordinate to copter and it goes to that coordinate?
@Joop_Brokking
5 жыл бұрын
The home location is stored in the SRAM as an integer. You can find more information and an example of auto land in this video: kzitem.info/news/bejne/x2ao0Jmfap-WmII
@HardFault0x00
5 жыл бұрын
@@Joop_Brokking Thank You Mr. Brokking :D
@ndaymungala8607
4 жыл бұрын
joop, your channel helped me alot through my journey with drones and as a kick starter on the blue pill. than k you very much
@kevinwalker2529
5 жыл бұрын
Nice build. Thanks for the video!
@mohammadsaeednaseri7445
5 жыл бұрын
Thank you ,,keep up the good work, Cant wait for the next video
@markgreco1962
5 жыл бұрын
As usual,,, fantastic
@aashutosh3721
5 жыл бұрын
your channel is so good , Im always wait for your next video :)
@OllieInTheOutdoors
5 жыл бұрын
Very keen to see more of that program you made for your laptop!
@ahmedallam9612
5 жыл бұрын
we are really happy to get your New video, very interesting
@flyaway7169
5 жыл бұрын
I hope you sir can integrate your copter into ROS as a node, and try to use SLAM or the other same sort of stuff for autonomous fly. Just a suggestion. Your jobs are awesome.
@vishal01mehra
5 жыл бұрын
Was eagerly witing for your video, Great info. Keep up!
@pascalou95pascal52
4 жыл бұрын
Hello Mr. Joop, I already made the first version with the STM32 and I'm happy. I would like to do another, but I would like to know how to connect ATtiny and what code to put? this is not indicated in the diagram. in addition I wish to buy a PCB to do a clean job, your gives too much to envy it is super beautiful. forgive my english, but i use the google translator. thank you in advance
@Joop_Brokking
4 жыл бұрын
I don't sell these boards. The ATtiny is not necessary as it is only used to reset the STM32. So you can design your own pcb from the schematic that I provide on my website.
@decomb
5 жыл бұрын
I'm waiting for the latest video from you and here it is 🙏🏻😊
@WorldHRN
Жыл бұрын
I see your tutorial about arduino quadcopter using UNO and STM32. If you don't mind, please give us tutorial about Transceiver NRF24L01 with PA or not for drone and other projects. THANKS. I really enjoy your channel. First reference for my arduino projects! So, never stop making please, WE NEED YOUR AWESOME TECH POINT!
@zahidid7846
5 жыл бұрын
Welcome back
@janrodo4978
5 жыл бұрын
You have amazing videos. Impressive how awesome audience you gained, 307 likes and zero dislikes. Thank you Joop.
@thu-alfikarfalih3278
5 жыл бұрын
Impressive as always 👌
@ethannf502
5 жыл бұрын
This is so cool! This is beautiful
@miriamramstudio3982
4 жыл бұрын
Excellent, as always !!!
@junuhunuproductions
5 жыл бұрын
Wow, welcome back!
@redlines2535
5 жыл бұрын
Very impressive, congrats
@gatisozols
5 жыл бұрын
Just great!
@myetis1990
5 жыл бұрын
excellent sir, it worths to redesign the layout which sums all seperate modules in one PCB, it would be great in terms of space in the frame and making the drone more lightweight, if i find enough time, I will do it.
@Joop_Brokking
5 жыл бұрын
Time is always a problem ;-) I just hope that this video gets you motivated ;-)
@myetis1990
5 жыл бұрын
Exactly motivated Thank you for such a great documentation which teaches makers
@edisusanto2146
5 жыл бұрын
@joop brokking. fall in love with the PCB. please share the PCB file for CNC printing.
@ttkoh123
5 жыл бұрын
Hi Joop, I suspect DJI bottom camera is for dead lock hover using digital image stabilization like the digital mouse reading the surface or the canon camera digital image stabilization except in this case, it's not for the image but for gathering the movement vector that the gyro or the acc cannot compete. I declare, I don't know any about it or how to do it. I am learning a great deal from your videos. Of course, it's not going to be easy and most likely commercial secret. When you do complete it, please allow download. thanks for sharing.
@satiromedeiros6876
5 жыл бұрын
JooP, You are simply the best!
@eyal4
5 жыл бұрын
hey, 1 more question - do you think it is possible to use Arduino as FC and raspberry pi as the master to send commands?
@amonrhapataya2629
5 жыл бұрын
so good
@04prashant
5 жыл бұрын
Amazing work.
@shlomibarg
5 жыл бұрын
love your chanel you are the best 🤗
@fermatwiles5220
5 жыл бұрын
Thanks Joop .very informative as usual
@cnrgal
2 жыл бұрын
how does Joop attach the reciever and other componenets that aren't on the PCB to the PCB mount? Any ideas on how I could attach something? Does he use electrical tape as it doesn't look like the drill holes are being used
@aldiriswandi4655
4 ай бұрын
error : 2. how can i do to solve this problem. this is caused by main program loop exceded, even i never change or add on original codes
@joshuawallace1065
5 жыл бұрын
legend
@eyal4
5 жыл бұрын
great project!
@jacks4321
5 жыл бұрын
After A Long Time your video came
@AndradeAndre109
5 жыл бұрын
@joop_brokking. following your channel for a long time, this project is amazing. I learn so much with your videos, but i have one question: why attiny25 in the schematic? Is it connected via I2c? make a video about this!!! thanks for such a well great channel in youtube.
@fusca14tube
5 жыл бұрын
FANTASTIC!!!!!
@fidelodok4393
5 жыл бұрын
So excited😁🤗😍😝 to see this.
@gholiamirza7102
5 жыл бұрын
Vielen Dank für soviel schöne Arbeit. Ich verfolge Sie seit zwei Jahren auf KZitem und habe jede Menge von Ihnen gelernt. War sehr besorgt, das Sie mit der Arbeit aufgehört hätten. Danke vielmals für so viele tolle und professionelle Leistungen. Ich bin momentan mit Altitude holding beschäftigt. Benutze gy-91 und Nano. Habe die bmp280 auch nach Ihrem Vorbild dekodiert. Magnometer funktioniert auch sehr gut. Im Setup Bereich benutze Systemtimer um die Escs am Laufen zu halten. Wenn PPM richtig funktioniert, dann kann ich auch Kanäle 5 & 6 für Funktionen wie rth oder waypoint benutzen. Eine Frage an Sie habe ich noch und wäre dankbar für die Antwort : Ist das möglich statt Attribut-holding die Accelerator im Zusammenhang mit elapsedTime so einzusetzen, dass die Drohne jede kleine Bewegung entgegen wirkt und quasi in der Luft fixiert bleibt? Vielleicht hat jemand das schon erfolgreich gelöst. Ich bekomme eindeutige brauchbare Signale in alle drei Achsen. Aber um sie richtig auszuwerten fehlt mir das Grundwissen. Vielen Dank im voraus. MfG.
@nileshmundphan4475
5 жыл бұрын
The excellent project you need make YMFC-32 Arduino drone your DIY kit for sell it great to start with it for others.
@sujaykadam99
4 жыл бұрын
how to switch return to home via radio control?
@robertparenton7470
3 жыл бұрын
Would be nice to get the Gerber files.
@marcusvinicius-ib1uk
2 жыл бұрын
dude you are very good congratulations for the projects how can i get this pcb?
@marcogongora2503
4 жыл бұрын
Great video!
@yasinrezaei4955
3 жыл бұрын
Nice
@juhiagarwal4700
5 жыл бұрын
thank you for your channel,,really amazing,,,
@sidharthtalia
5 жыл бұрын
Everybody gangsta until joop comes out with his stuff. Good going!
@autodidactamm7625
5 жыл бұрын
As always perfect
@mattelanni
5 жыл бұрын
If it was a product, i would buy it
@anishp3677
5 жыл бұрын
Where can i get the pcb you designed
@jobaptist
5 жыл бұрын
pcb design is copyrighted and dont dream of asking for it free of charge!
@anishp3677
5 жыл бұрын
@@jobaptistthen we would buy
@AmineMahdhiChaine
5 жыл бұрын
You are the best Joop Thanks a lot
@user-wc7fi6gx6r
5 жыл бұрын
thank you foe come back :)
@abutaherdin1561
5 жыл бұрын
I have a question just like you said that your code can run on flip 32 . The main question is can I use betaflight in ymfc 32 the coad for flip 32
@pascalou95pascal52
4 жыл бұрын
hello, thanks for that answer. I will therefore realize a PCB. little question, the led high moon diode that you use replaces the green led and the red led? I suppose the value of the resistances is different, since it consumes more?
@professorEduardoBrasil
5 жыл бұрын
Your job is really great! Could you consider migrate your code to ESP32 Lora?
@pascalou95pascal52
4 жыл бұрын
Hello I also have a problem with the calibration of the sticks, the lowest value is 1050 or 1060 and the highest value is 1960 or 1980. this on all the sticks. how to lower this value to obtain 1000, 1500, 2000? thank you
@nachocortizo3321
5 жыл бұрын
Awesome nice job!
@premkumar-pt1gj
3 жыл бұрын
Joop which code should i use for this ymfc ,and plese share verber files
@martinchege8487
4 жыл бұрын
have you implemented how todo with programming a fight path to capture aerialphotographs in a certain defined field as per the flight plan
@pascalou95pascal52
4 жыл бұрын
Hello, I would like to know which schema to use with the latest version using the stm32. because the former used the signal ppm (A0) and the other uses each output of the receiver (A0, A1, A2, A3, A6, A7 so the connections on the stm32 are different. I guess the program is different too. thank you
@sukhee5
5 жыл бұрын
I love it.
@mechatronicsevolution1624
4 жыл бұрын
Can I use a 5000mAh 25C 3s battery?, it says only 2200mAh or 3800mAh in the Schematic. Does the battery have any implications on the code?
@vleiswalker9374
4 жыл бұрын
Thank you very much Joop! It is an amazing project, appreciate your efforts. One question please.... If I observe the pcb in this video, there appears to be more components (cap, 4-pin led, small micro, diode and resistors) as on the schematic which is included in the software download zip. Is there an other schematic I must use to produce a similar pcb, please? Thank you
@aissaguezoul5044
3 жыл бұрын
can i get pcb of this tutorial ?
@basirsharifi1806
2 жыл бұрын
Hello! I wonder where can I find the circuit board that are you using?
@Pavana_sai
5 жыл бұрын
Waiting for this 🙂
@byvoldnnikkei5929
5 жыл бұрын
Thanks for your sharing...
@shoaibakhtar2484
5 жыл бұрын
I wanted to ask you whether I can use the teensy development board as I am not able to program my stm32 and the forum for it is also closed now. Please help me. Hoping for a fast reply from your side.
@juhiagarwal4700
5 жыл бұрын
sir can you help me to make communication between multiple drones?
@sandideas5993
4 жыл бұрын
juhi agarwal what do you wanna build?
@bogenriederlukas
5 жыл бұрын
such a sexy design
@pengembarasejati173
4 жыл бұрын
This is need to know gravity center of drone ?
@sandideas5993
4 жыл бұрын
Hi Joop,share your PCB design files and all components as you were attaching more resistor,RGB led,capacitors and diodes so please consider sharing PCB design file or atleast this new schematic with all components,will be waiting for your reply..
@RogueBro
5 жыл бұрын
joop thanks for the updated video
@cloudcamdrones
4 жыл бұрын
This works without the barometer? (I don't need this resource now)
@MrJoshua49651
4 жыл бұрын
Great video! Would it be possible to use this flight controller on a fixed wing?
@yasharyasrobi2750
5 жыл бұрын
How can I find out what is the optimum distance I need to avoid noise on GPS? And how come DJI can put their GPS into their frame and not have any problems? As always great and informant video! I relly enjoy and learn alot watching your content. Thanks.
@Joop_Brokking
5 жыл бұрын
The reason that the GPS is on top is because of the compass module. The GPS itself can be placed (shielded) inside the frame without any problems.
@DeJanottama
3 жыл бұрын
it is Amazing !!!
@osamaomar9096
5 жыл бұрын
you are the best ❤
@Jordian0
4 жыл бұрын
Hey joop! Can you please provide the gerber format of pcb...
@wisehomo
4 жыл бұрын
how many hours did the whole project take you to finish?
@raymondmichael4987
5 жыл бұрын
Watched the full video, impressed and subd with notification ON, looking forward to more videos and explanation. I would like to diy it, is the arduino code available on your site? Greetings from Tanzania 🇹🇿
@Alexander-ri1bp
4 жыл бұрын
Hello Joop and thank you for your great work. Is it possible for us to buy or get the pcb layout file somehow? I have startet to build a YMFC inspired by you :-)
@eyal4
5 жыл бұрын
can you explain the code that you used for reading the PPM signal from the receiver? I saw the video of the PWM but I'm trying now to implement this with the PPM signal. Thank you Great videos!
@Joop_Brokking
5 жыл бұрын
You can find some tiny details in this video: kzitem.info/news/bejne/x2ao0Jmfap-WmII
@premkumar-pt1gj
3 жыл бұрын
Joop can u share schematics or gerber files please
Пікірлер: 172