Savage video Conor, thinking of doing something similar soon. Great pair of hands on ya lad 👌👍
@connormcmahon3724
Жыл бұрын
Thanks a mil Adrian👍🏼
@stoicfarmer
Жыл бұрын
Brilliant video, very instructional and unlike a lot of others on the subject, you make it very easy to understand and replicate. 💪👍
@connormcmahon3724
Жыл бұрын
Thank you, glad you enjoyed! 👍🏼
@PaddyGun
Жыл бұрын
Great video, one suggestion I would have is that when you do big projects like this you should split them into 15-25 min videos, not because everyone has short attention spans but because when people click out of a long video tk take a break KZitem assumes that the video is boring and Doesn’t recommend the video to as many people. Splitting up the project and maybe spacing the video releases a day apart and having people watch all 3-4 videos forces viewers to come back to the channel further boosting your analytics values and boosting views and recommendations. I know it sounds like a bit of waffle and I’m certainly not complaing as it was a fantastic video as all of yours are and I learned a lot just a bit of advice
@connormcmahon3724
Жыл бұрын
Your 100 percent right, but the time is the problem Paddy so I decided to roll it into one to keep it like a package deal! 👍🏼 Thanks and glad you enjoyed!
@kevinwalls19
Жыл бұрын
When you did the line at the back to keep the top roof sheets right how did you keep the top of the sheet from getting away on ya what did you come of , and how do u get the first sheet square to start so it doesn't run of on you brilliant video your a great worker doing it all by yourself 💪👌
@connormcmahon3724
Жыл бұрын
@@kevinwalls19 the big part is to ensure the building is square and once you start your first sheet you will have a reference. When installing the sheets you can adjust them slightly on the lap edge if you are running off slightly. 👍🏼
@richardparsons8320
Жыл бұрын
I'm glad you made the odd mistake, you made it so easy ,a brilliant job keep it up .
@connormcmahon3724
Жыл бұрын
Thanks Richard
@shotgunharry980
Жыл бұрын
Yet another savage video!! Tidy job 👌
@connormcmahon3724
Жыл бұрын
Thanks man
@philhyde2635
Жыл бұрын
A great job. I now have shed envy.
@nk11090
Жыл бұрын
Great job Connor, you should be doing that for a living. Tidy piece of engineering👍
@connormcmahon3724
Жыл бұрын
Thanks! 👍🏼
@mf-yz4qn
Жыл бұрын
Lukn for a video like dis for a long time. Fair play great job.
@johncoakley4279
Жыл бұрын
Well detailed video, tasty work and a fine shed you have, for reasonable cost.
@connormcmahon3724
Жыл бұрын
Yes very reasonable except for the cladding which is not cheap at the moment!
@decalshedsignsco6849
Жыл бұрын
That is a savage job you done there, unreal work for one man. great video.
@connormcmahon3724
Жыл бұрын
Thanks 👍🏼
@jamesscully2374
Жыл бұрын
On the side sheeting where it meets the roof I always bolt a 3x2 timber into the web of the beam and fix the sheeting to it then place the flashing over it. It gives the sheet great strength. Great job fare play.
@connormcmahon3724
Жыл бұрын
Cheers James, great advice for the next one 😂👍🏼
@mead6754
Жыл бұрын
Top job mate all the best from Sydney Australia
@jackmcelwaine6405
Жыл бұрын
great video Conor and amazing job with the shed if only every farmer could build a shed like that you did an amazing job top class shocking tidy job you saved some money doing it urself compared to getting some1 fair play to ya
@connormcmahon3724
Жыл бұрын
Thanks Jack, yes huge saving!
@conaran7039
Жыл бұрын
Great video and great work. You can't beat it
@Maceiretruckandplant
Жыл бұрын
Great video Conor, really enjoyed it. South Armagh?
@connormcmahon3724
Жыл бұрын
Cheers for that!👍🏼 Not south Armagh but very close, just on the Monaghan side of it👍🏼
@Arvindb3
Жыл бұрын
I dont know how come you guys making these projects look so easy 😌. I was removing a stuck screw by drilling a hole & using screw extractor, it felt so tough 😔
@connormcmahon3724
Жыл бұрын
It’s not all easy, don’t let it all fool you. Practice and some patience along with some motivation is generally all you need! Good luck! 😊
@bobbyfidgeon4567
Жыл бұрын
Super bit of work connor fair play
@connormcmahon3724
Жыл бұрын
Cheers Bobby, hope your keeping well lad👍🏼
@shaneflynn7676
Жыл бұрын
Clamp an end plate on the column for drilling,saves a load of time marking every single hole. Great job all the same
@connormcmahon3724
Жыл бұрын
Cheers Shane, the problem I had was getting enough magnetism from the mag drill to not lift off when drilling and the plate wasn’t just long enough. But thanks and great suggestion. Glad you enjoyed 👍🏼
@harkbelial
7 ай бұрын
Oh the struggle of the angles😂😂😂
@connormcmahon3724
7 ай бұрын
😂
@ciaranconeely8579
Жыл бұрын
Comment for the algorithm to help the channel 👍 👍👍.
@connormcmahon3724
Жыл бұрын
Thanks a mil Ciaran👍🏼👍🏼
@youngfarmer5414
Жыл бұрын
Brilliant video, have found the irish Andrew Camerata🤣👍
@connormcmahon3724
Жыл бұрын
Cheers man, he’s probably my favourite tuber actually and inspired me to start the channel👍🏼 thanks for the compliment and the good feedback 👍🏼
@markdunne7128
Жыл бұрын
Savage video really informative!!! Super job
@connormcmahon3724
Жыл бұрын
Thanks Mark
@ciaranconeely8579
Жыл бұрын
Great video, great content.
@connormcmahon3724
Жыл бұрын
Thanks Ciaran!
@aidandonaghy8853
Жыл бұрын
Great job tidy well done 👏
@johnoleary5612
11 ай бұрын
Super Job. How much do you reckon the steel would of cost to buy it off the shelf (unfabricated of course)
@connormcmahon3724
11 ай бұрын
At a rough guess John, probably somewhere from €4-5k.
@DAVID-bv2gv
Жыл бұрын
Great Video There ,,what you doing with that CLASSIC HILUX 👍🏻
@connormcmahon3724
Жыл бұрын
Cheers, it’s a brothers restoration project 👍🏼
@davidefogacci178
Жыл бұрын
Nice video! Keep going make this kind of video !!
@mikeysky8917
Жыл бұрын
That was a really good watch. Really enjoyed it. Is there a pitch degree that shed manufacturers stick to? Solar panel companies seem to recommend a shed with a 15 degree angle
@connormcmahon3724
Жыл бұрын
It is a question I’ve asked but no, not necessarily. I am in the engineering field and it all depends on your snow loading. So if your roof is capable of carrying large snow load then it can literally be as flat as you like! If you put a slope on it it reduces the size of i-beam you need to use in your main structure. Glad you enjoyed, it was enjoyable to build!
@stephenduncan1663
Жыл бұрын
Thank you very instructive. Is it done under permissive development?
@francisconnolly7952
Жыл бұрын
Well done , fair play for sharing all the information, how many hours you reckon you put in
@connormcmahon3724
Жыл бұрын
Thanks Francis! A lot of hours! Using old steelwork was the worst for time consumption! I would say there was a couple of weeks work altogether in it. The assembly of the shed itself only took around 8 full days or so. Cheers 👍🏼
@haizor2000
Жыл бұрын
Mighty job that. Roughly how long did it take to put up once you had all made? Fair play 💪👍
@connormcmahon3724
Жыл бұрын
Had the steel frame up in around 10 hours and altogether the entire assembly took me around 8 days, just jigsaw stuff as long as you have all your levels correct to start with and you square it off properly! Thanks for the feedback, much appreciated 👍🏼
@BackyardMechCon
Жыл бұрын
Great job in fairness! 😃. How do you get a fall in the guttering if it is aligned to the roof?
@Corfine
Жыл бұрын
Great worker you can Buy steel in BQ Galway if need small amount for shelfs or small project for small money halcon steel sell metal for sheds
@wildcat22
Жыл бұрын
Fine shed. What ya doing with the Hilux?
@connormcmahon3724
Жыл бұрын
Thanks man. Hilux isn’t my project, it’s my brothers restoration project👍🏼
@wildcat22
Жыл бұрын
@@connormcmahon3724 nice, I had a 1992, same colour and stripes, 6" lift, 35" tyres and a real nice set of bars all round. Had to sell it as got into financial difficulties. Sheeting down the side of the shed overhang is a good idea. Might do the same on the weanling shed if I get a chance. Good channel lad.
@connormcmahon3724
Жыл бұрын
@@wildcat22 thanks man. Yea that Hilux is a 1995, unbelievable machines!
@matthewgreen4970
Жыл бұрын
How do you get the run on the gutter? Is it folded so it runs or do you pack it out with something?
@georgedoorley5628
Жыл бұрын
well done that is a very very tasty job .............bet its not your first rodeo ....!
@connormcmahon3724
Жыл бұрын
Well not really but it is on my own at the same time 😂 thanks George!
@stjepanvorkapic1430
Жыл бұрын
Pity, you have no longer drill
@vincentmcdonnell7986
Жыл бұрын
Ok
@danielcunningham5052
Жыл бұрын
Would u not be better make shorter 15 or 20 minute videos and more of them??
@connormcmahon3724
Жыл бұрын
Unfortunately time to do those things sometimes isint as easy as it seems but thanks for the suggestion Daniel. I just decided to roll it all into one to keep it as a package deal!
Пікірлер: 72