Wow😮its so nice and beautiful,thats the quality, can i buy that one?
@kostasgold
11 күн бұрын
Very nice
@atelierkanagawa
Жыл бұрын
Looks beautiful, do think the handle and jointing will stand up to water and pressure/usage over time? The shape is beautiful too, I love the dynamics/curves of it! How long did it take from start to finish?
@MHMDAMEN
Жыл бұрын
Where do I get the trigger?
@claudio.i
Жыл бұрын
hello nice job!!🤩 May I ask which cutter did you use for the bar and which cutter did you use for the springs? the back curvature is very nice Have you thought about creating a Rollerball 😉
@rafaelsevillano1437
Жыл бұрын
wow very nice . hope to have one someday
@checkmateChannel
Жыл бұрын
Thank you!
@viacheslavbaburin3307
Ай бұрын
What wood you used for making gun?
@lmnop20sharks
Жыл бұрын
Hi, if I make a wooden speargun wit 3 horizontal laminations would that be OK?
@Maumroobci
Жыл бұрын
Hi friend very good 👍
@checkmateChannel
Жыл бұрын
Thank you mate 🙏🏼
@benjamincyr1697
Жыл бұрын
where did you get that piece of rubber for the stock ? looks awesome !
@cristiand.mbricosybarcos4455
Жыл бұрын
hey nice job incredible, but you have not placed a counterweight??
@checkmateChannel
Жыл бұрын
Surprisingly, the buoyancy was not very high so no counterweight was necessary.
@reybanalo803
8 ай бұрын
Good job
@checkmateChannel
8 ай бұрын
Thank you 🙏🏼
@randommadman7348
Жыл бұрын
Bro's gonna counter under water labs.
@szwarcbarteli
4 ай бұрын
What’s the dimension ?
@islavlog3650
Жыл бұрын
Nice SG I hope I can have the same SG like this one😢
@Geerods-gh5du
5 ай бұрын
All the effort must pay off.
@tristancombalot-giorgi1875
4 ай бұрын
Bonjour où est-ce que je peux vous contacter car j’aimerais beaucoup faire mon fusil roler en bois et je besoin de conseils est-ce que cela serait possible
@WAVE440R
Жыл бұрын
my opinion is that the speargun wont last long because you took the wood as it isand you didnt cut and glue it with the woods upside down. the glue protects the wood from warping take a look other manufacturers and see. its a nice try although
@checkmateChannel
Жыл бұрын
Maybe. I saw it in many videos but I simply don‘t have the knowledge and machines to do that. It even looks nice though. I hope the best. Thank you 😊
@WAVE440R
Жыл бұрын
@@checkmateChannel you dont need sophisticated machines or much knowledge just cut them in half make them with a sandpaper and a square tube straight and glue them together. The tip is to put the first wood opposite than the second so the stripes of the wood go in two ways. Patience is the key... You put so much efford thats why i tell you do it right the other time
@somaszentkiralyi-toth3058
Жыл бұрын
Warping is only an issue, when the wood wasn't allowed to dry. If the wood was completely dry at the time of the video, it'll be fine most likely
@tioputra7093
Жыл бұрын
What did you used to fill the name? What liquid?
@checkmateChannel
Жыл бұрын
I used black epoxy resin to fill it.
@unregisturd
Жыл бұрын
Nice job mate! Have you caught much with it?
@checkmateChannel
Жыл бұрын
Thank you 🙏🏼. I caught some dusky groupers, Sargos and a goldblotch grouper in Greece. Not as much as I expected to catch in the whole holidays but that was more due to the lack of hunting skills 😄. It was a nice lesson though 😊
@jorebenbabiano9213
10 ай бұрын
Kuya mag kano ang ganyan kahaba?
@mikeunleashed1
9 ай бұрын
Wow
@inggo303
Жыл бұрын
How much
@albisalija4177
Жыл бұрын
what tipe of wood did you use?
@checkmateChannel
11 ай бұрын
I used Teak 😊
@davidmarsh2880
6 ай бұрын
Bro how much would it cost for you to build 1 for me??? Serious enquiry
@santusantu2416
Жыл бұрын
Sar price feshing gan
@junreynuena
Жыл бұрын
How much sir.?
@checkmateChannel
Жыл бұрын
I'm sorry but I only built it for personal use.
@nyongsirken2790
Жыл бұрын
goog👍👍👍
@oscarjafwt2527
Жыл бұрын
Cuánto vale el
@DebarghaChatterjee
7 ай бұрын
Order he
@oscarjafwt2527
Жыл бұрын
Quiero comprar un arpón de eso
@checkmateChannel
Жыл бұрын
Lo siento, pero solo lo construí para uso personal.
@pedrocostareis8330
Жыл бұрын
...You don´t make the slightest idea of what you are doing, right?...
@checkmateChannel
11 ай бұрын
No, it was the very first time I made such a project. I learned a lot from this and have very few experience with spearguns. But I can tell you it‘s such a great feeling when you see it works. I shot a nice dusky grouper in Greece a few days ago…I think it looks good, it was a fun project, it works! - That counts more than doing everything as told in textbooks.
@badrcoach
5 ай бұрын
عمل متقن
@elmisteriodelapiedad9412
Жыл бұрын
Hola, podrías decirme de cuantas pulgas es la madera para iniciar el arpón? Te lo agradezco
@lmnop20sharks
Жыл бұрын
Hi, nice. What kind of wood did you use? What is the price of the trigger mechanism?
@checkmateChannel
Жыл бұрын
Thank you! I used old (ca. 40 years) Teak wood because it was so hard to get teak in the size I needed it. The handle is made of „new“ Teak. I paid 52€ for the trigger mechanism.
@lmnop20sharks
Жыл бұрын
@@checkmateChannel I was trying to source teak but I can't find any to make a speargun. I used mahogany instead. The gun I made is awesome and I want to make more. I made it about three months ago.
@lmnop20sharks
Жыл бұрын
Nice job
@checkmateChannel
Жыл бұрын
It‘s an awesome feeling to hunt for fish with your own handmade speargun, isn‘t it?
Пікірлер: 62