The best diy awning I've seen so far. And I've seen a lot.
@PatrickRemington
3 жыл бұрын
Thank you! 🙏🙏🙏
@marlonllaneta2130
2 жыл бұрын
i agree
@jeffwelsh1185
2 жыл бұрын
Nice awning, simple design, easy set up. Very easily sourced materials. Thanks for the video. I would like to see you do a diy build on a pop out shower stall and shower heated by solar. I see some made out of big pvc or abs pipe and they pressurize them with air, I have also seen one that was a military water can with a submersible 12vdc water pump. Thanks again for the video.
@mathewhunt81
2 жыл бұрын
hell yeah!
@donniehelmly4920
5 ай бұрын
I put one on my 8' truck topper. But, I used the C channel mounted on the topper. Trap slides in the C channel.
@cosaelperro1972
4 жыл бұрын
the part about building the awning is great... but the part that you use a hose piece instead of a fixed attachment is just genius... it removes all the stress .. and if/when it fails.. is a $2 dollar fix and back in business, you can even carry some extra in your tool box... Awesome.
@PatrickRemington
4 жыл бұрын
Thank you!
@tactical_overland_zr2188
3 жыл бұрын
Yeah, I was just about to say that he needs to submit a patent application for this immediately before CVT, Darche, Smittybuilt etc see this video. We had a 6’ CVT awning and that was my biggest complaint. The tension rods had no flexibility and allowed minimal adjustments. I was always afraid I was going to bend them. Then when the sun was low or in the rain you couldn’t adjust the awning low enough to block. This is pure genius.
@604roger
3 жыл бұрын
I told him about it 🙂
@Sophos1964
Жыл бұрын
Using the hose is genius! In fact, his entire design & build is genius! Having his daughter watch dad work…priceless! Great job Patrick!
@norsefalconer
4 жыл бұрын
1. Great Finished Product. 2. Thorough Step-by-Step Presentation. 3. Low Cost, With No Special Tools. Excellent!
@PatrickRemington
4 жыл бұрын
This is my exact criteria for all my videos.
@mattgibson6426
2 жыл бұрын
Auto trimmer tip for you. When setting vinyl a longer stitch length is stronger than a shorter stitch length is. This additional vinyl (or leather) material between the needle holes prevents the seamline from becoming a perforated tear line under stress.
@DL-by8el
2 жыл бұрын
Wow good point
@chrisglen5025
4 жыл бұрын
The problem with rooftop tents is getting dressed sitting down in the tent and you need somewhere to sit/prepare food etc. when the weather is bad. I have added zips to three sides of the awning and made three individual zip on sides to make a fully enclosed tent. The end section has a zipper door and the side pieces have mesh screen windows with a roll up canvas cover. Also added side panel to fit between the wheels to close the gap under the vehicle. A spare extendable pole placed in the center of the awning ensures good run off in heavy rain. Flipping the roof rack mounting brackets upwards will increase the head clearance. It is essential to have guy rope mountings to secure the awning in windy conditions . Pegging down the side panels makes the set up fully windproof.
@marciabrainard9837
4 жыл бұрын
Your "build" was the first to be explained totally......have watched others for 2 years who denied all the measurements details....you were wonderful..thanks for sharing
@PatrickRemington
4 жыл бұрын
You are welcome! Glad to help!
@PatrickRemington
4 жыл бұрын
I’m definitely going to add straps to the sides and tie downs at the corners! Y’all chill! 🤣🤣 I accidentally edited out the clip where I mention this.
@fastfoodvwFL
4 жыл бұрын
People can be ridiculous
@fastfoodvwFL
4 жыл бұрын
Until they can work a sewing machine the way that you do, they should stfu. Thanks for your help in the area of DIY
@joejojo4751
4 жыл бұрын
Gréât stuff i love watching you build this stuff, you inspire and I definitely want to make an awning like yours for my Mitsubishi L200 . Thanks for your videos keep making them.
@timbenracing
4 жыл бұрын
I think that goes without saying. As creative as you were with the rest I doubt you would have forgotten that. Lol awesome build. Thanks.
@McDonaldLyle
4 жыл бұрын
I'm going to give it a good go like haha
@Ravenwood82
3 жыл бұрын
Thanks so much for these! Definitly going to make this. One thought. I always put a small fender washer under the head of the rivet when using it with fabric as it helps relieve the stress under the head.
@kristaneils2907
2 жыл бұрын
Y
@shaunvickers7272
2 жыл бұрын
You’re an absolute genius sir! I’ve took 95% inspiration form your post and my awning looks so professional, thank you so much for your inspiration Shaun here in UK
@PatrickRemington
2 жыл бұрын
Thank you for saying that! Great to hear that your project turned out well! 🙌🙌
@mathewhunt81
2 жыл бұрын
hey we'd love to see it! make a video for us?
@eireanneruss9325
2 жыл бұрын
I have watched several of your videos. You are a natural teacher, making sure to explain all steps AND the reasons behind each step.
@caidhg
4 жыл бұрын
That was super clever with the heater hose.
@Boediprasetya
4 жыл бұрын
Smart Choice using Heater Hose....Heavy duty and flexible
@dustymojave
2 жыл бұрын
This video reminded me that I need to repair the end of the vertical poles for the similar awning on my pop up trailer. The year before Corona the bag for our awning was falling apart. So I bought some Sunderland fabric online and my upholstered friend made a new bag. Had to add web straps on the outside with clips to keep it from blowing around on the road. Velcro straps on the sides for wind flap would be good or there are plastic clips for the same available from Amazon. In my part of the world (Mojave Desert), tie downs are necessary on the outboard poles.
@goldenglowladore3842
Жыл бұрын
I'd love a video on how to build/ sew an enclosure that could attach to your awning.... with zip up windows and door. Lol.. I'm not asking for much 😂... I love your build and your daughter excitement and smile when sewing how handy sewing is! Daddy's amazing!
@goldenglowladore3842
Жыл бұрын
Phenomenal build and skillset young man! Multi-talented. Showing the materials (and what they're called) helped simplify it and makes the project not be overwhelming. I love the hose idea. I'll probably think of questions later. One thing I might also sew on along the sides of the fabric is velcro straps to snug up to the support poles. Thanks for re-teaching me how to install a zipper etc, etc, etc!
@XroorX
2 жыл бұрын
The cover you made was cherry on top!! Awesome
@PatrickRemington
2 жыл бұрын
Thank you! 🙏
@Mistakes_Were-Made
4 жыл бұрын
Your ingenuity and her smile earned this like. Great tutorial. If I wasn't so lazy I would follow this walkthrough for my awning
@sherrymuzykazekestravels6793
3 жыл бұрын
I am amazed at your talents. I couldn’t believe how many technics you used to create this amazing awning. You are a great teacher and this project is simply amazing! I couldn’t stop watching and wanted to learn more! I wish I could pay you to make me one!!!
@moawiyaalrawas270
8 ай бұрын
I love the overall design and simplicity. I specially like the hose connection as it provides better durability against wind. If it gets blown up, the hose connector should provide enough flexibility. Amazing, thank you.
@loadmasterc141b4
3 жыл бұрын
My brother learned to sew in the Air Force when he was a parachute packer. He passed that on to me. Great skill to have. Great awning and great video! Can't wait to build mine...
@haroldgc1140
4 жыл бұрын
Great job mate, I'm going to give it ago for sure. I just wish you had sawn in 3 or 4 valcro strips along both side to keep it tight wish would omit the sag.
@CarolinaChrisOutdoors
4 жыл бұрын
Very cool Sir. I think I was most impressed with the vinyl cover. I’m new to sewing and I haven’t attempted sewing a zipper yet. Why us guys aren’t taught how to sew at an early age is a mystery to me. So many cool pieces of gear to make! 👍🏻
@ratherbfishing455
2 жыл бұрын
Girls are rarely taught to sew. People are too busy on their electronics:(
@DL-by8el
2 жыл бұрын
Love it that you want to sew. Take a look at the information about the stitch length. Wider stitch is better and stronger. As to not create a tear where vinyl is puched from the needle. I am a 61 lady now learned to sew and watched my dad and brother work on cars. I learned though by watching. Thus Jeep Wiz I put a new radiator, hoses, thermoostat, radio, head rests, missing screws, and other things recently to an 04 jeep. Remember you can walk through a vehicle scrap yard for things as well. You can remove interior items like the black hooks from jeeps and use them in camper builds. I also found roof racks cheap. I want to find a Subaru rack but have not yet. Sold my jeep.
@Prepping2endure
4 жыл бұрын
cool idea for using the fabric tape to hold the zipper... sure beats pinning it down.. Thanks for sharing
@PatrickRemington
4 жыл бұрын
Yes it does! You are welcome!
@andrewchong1154
3 жыл бұрын
The awning looks great! Coolest part of the video is seeing you share the experience with your kid.... thumbs up!
@rudyfisher7660
Жыл бұрын
All you have to do is go to Academy and get some scotch guard. Tent spray and spray on it. But that canvas, and it'll be waterproof and Scott's guard of tent spray waterproof.
@startingoverat5722
2 жыл бұрын
So I just saw your video on how to make the 270 tarp and I was thinking about making one myself and running through some ideas, but you nailed it. You completely solve the problem that rhino has with theirs that if the pole suddenly drops down from wind it’s gonna snap the hinges. Just started following you and I am looking forward to going through all of your videos.
@JohnDoe_toetag
4 жыл бұрын
Very nice. I would suggest double stitching the zipper to the vinyl. Also, why not have the zipper run around the corners? That way the cover would open completely up & get out of the way.
@vxphan2601
2 жыл бұрын
Very slick design. I wish I see this video earlier before buy the awning
@mathewhunt81
2 жыл бұрын
wow! i cant imagine the factory made brands working any easier, faster, or better! awesome!
@davidashley2719
4 жыл бұрын
You could sew a 4 or 5" piece of velcro in a few places down both sides so you could wrap the velcro around your left and right support arms. That would keep the canvas tight in the wind and creat more support on all 4 sides. Just a thought. Awesome job! I have saved this and will watch it again when I go to make one for my truck!
@waynedyer3475
3 жыл бұрын
Thank you. Impressed for sure. Also nice seeing you with your child while you were sewing. Outstanding! Will make one for my bug out. Be safe and enjoy camping.
@ZZme31
2 жыл бұрын
Great work! I like that you had the little girl showing anyone can sew! I’ve been sewing since I was a toddler. Two pieces of advice. One, mount the awning the other way on lower cars to give about 4” more head room and two, since you know how to sew add a few Velcro straps to the sides of the duck cloth to strap to your side bars. 👍🏼
@garywhelansr5602
4 жыл бұрын
You are a genius with common man savings n ideas great job..
@PatrickRemington
4 жыл бұрын
thank you!
@duceanahalf
4 жыл бұрын
For the zipper, if you sew the zipper on the face side with the teeth away from the edge first, then fold it and stitch it down you get a nice finished edge and a double stitch for more strength
@joeyt684
2 жыл бұрын
Awesome idea!
@paulcleveland100
28 күн бұрын
Great design and easy to follow build also very cheap to make .brilliant!
@9w2xyz
3 жыл бұрын
Did the same thing, in order to strengthen the poles at the hinges, I put in a broomstick and drilled it through.
@anamoraes6768
4 жыл бұрын
Thank you for sharing with us. I will try to do it on my Chevrolet Spin. I loved seeing your daughter's smile. 🇧🇷
@MonkeySpecs301
3 жыл бұрын
probably one of the better ones ive see build. i thought about building this and some other things, but decided to buy instead due to resale value, and if you take into account the time and driving to get parts basically spend the same after you resell an ARB while a home made one most likely has no value at all. thx
@marymacfarlane4275
2 жыл бұрын
Excellent instruction and showing all the steps. TY!
@iseaalbert
3 жыл бұрын
No need to watch any other awning video. Simply the best!
@deepakshrivastava3572
Жыл бұрын
Amazing work Patrick ....I love the way you describe each process in simple terms that even Dummies can understand. ... but the highlight of today's video is the live doll you're holding ... your daughter is sooooo cute.. God bless her 🥰🥰🥰
@cheeto.1
3 жыл бұрын
Nice 👍 best DIY I seen. Gonna use this for my Square Drop Trailer Build. Thanks a bunch for sharing
@JU59vlogs
5 ай бұрын
Thank you for this! I have actually built my own awning based on your design. ❤
@derykmacleod4979
4 жыл бұрын
Thank You! You have given me some ideas, I have a 2010 transit connect I have been converting into a camper for some traveling. I added a hand held shower head to my 15 gallon water tank so I can take a "room temp" shower out back of the van, and a spot to stick the porta potty if I am camping there for a few days. Will add side walls and this way I can close the back doors of the van for security and still have this set up.
@authenticarkansas
3 жыл бұрын
This is great, I particularly love that you showed sewing the case and how to put it on standard roof rack crossmembers on the Subaru. Makes me want to go buy a drill press and make one!
@PatrickRemington
3 жыл бұрын
thank you! and a hand drill will do just fine I promise!!
@virginiagerardi2056
2 жыл бұрын
You are a true craftsman! Great design and fabrication.
@Sco33a101
3 жыл бұрын
What in the man of many talents just happened? Im shocked and very impressed, I was originally going to watch the other awning video but came here first. 1st class 👌🤙
@putridperrier
4 жыл бұрын
If you cut a notch on the “pushing rod” to add the button, you can correct for twist as you get close to the pole button hole.
@e.g.m6598
4 жыл бұрын
brilliant!
@PatrickRemington
4 жыл бұрын
I just drew a black line so that I knew when I was getting close and in alinement
@chrissolomon8868
4 жыл бұрын
Very simple and easy, good work.
@zachpendergrass8831
3 жыл бұрын
Dude! That's sweet!! Nicely done sir!! 10/10
@asnawiu.solaiman6648
8 ай бұрын
I'd like to make it just like that, thanks for the video it really helps a lot. I just noticed that the height of the installation is a little bit lower there is a probleb in closing and opening the door of the car. All in all its the best DIY I've seen..❤
@GoneBroke
Жыл бұрын
Awesome build the only thing I'd add would be some velcro straps to the sides to attach to the side poles to stop the droop. 👍👍
@DB-yj3qc
2 жыл бұрын
I thought I would tell you that I started building one a few months back after I got just to the point of getting the material for it. I got a offer to buy a 6×8 awning for $107 including S&H so still a win. Now I'll just have to convert the one I was building to a 270° awning for the other side. Great job! Thanks many times over.
@sergiovelazquez6681
4 ай бұрын
Greetings from Mexico, this weekend the project started
@richarddagobert2703
Жыл бұрын
WOW, you did a really nice job on this awning, I'm thoroughly impressed with your ingenuity, great idea using the rubber hose and I have to add I'm jealous of your sewing skills...LOL.
@ttonAb2
4 жыл бұрын
after getting drenched for a week on the coast this is what I will be building next! thank you!
@gerryward7
4 жыл бұрын
I’m going to use a retractable projector screen for my awning (hopefully it will work) Had a few ideas for poles onto i seen this video 👍👍👍🇮🇪. Another cracking video.Thanks
@michaelosmon
4 жыл бұрын
Nice, you can let it hang to the ground and watch movies on it
@coltonoberhansly7823
6 ай бұрын
I've had this idea for years. You ever get to it?
@thetipsygypsy2019
2 жыл бұрын
I appreciated the awning bag! I was going to hire one made BUT not now. I will use your video and make my own. I've been hanging onto an old canvas awning and poles from a popup camper the I will now attach to my van luggage rack. Thank you ... bet there's NOTHING you can't do! Your absolutely amazing!! P.S. what a nice well equipped work shop.
@delguingaro
4 жыл бұрын
my wife and I had the same idea, but it came out a little differently! very good!
@friolo
4 жыл бұрын
THAT HOSE!!!!! MINDBLOWN!!! DEFINETLY BUILDING THIS! greetings from PANAMÁ!
@GoAndStay
2 жыл бұрын
I just love your assistant! They grow up so quickly
@haydenrines685
4 жыл бұрын
Figured you'd enjoy knowing that I will be using this idea for my next work vehicle. You'll have made such a big difference in my quality of life come next summer. Thanks for the idea.
@rexwilson6598
4 жыл бұрын
Brother I Manufacture Awnings for a living you did A GREAT JOB ON THIS , HATS OFF TO YOU ! TAKE CARE OF THE LITTLE ONE SHE'S PRECIOUS ! I ALSO SUBSCRIBED TO YOUR CHANNEL !
@garymyers4496
2 жыл бұрын
What a sweetie you had as your boss.I hope she can show you how it is opens and closes.lol. good work.
@keniferusxj7047
3 жыл бұрын
You are truly a craftsman 👍👍
@rwind656
11 ай бұрын
Fantastic!! Thank you very much for sharing your design!
@jonluchessi1643
9 ай бұрын
This was awesome, you’re a brilliant guy👍👍👍👍
@richpatten4195
4 жыл бұрын
You might want to add 3-5 velcro straps to the awning along the edge to reduce sagging
@Alx2672
4 жыл бұрын
Awesome canopy! Couple ideas... Snap straps where the middle is drooping. You can use rivits in the wood plug instead of screws. The roll straps, attach them to the brackets that attach to the roof rack so they don't come loose, a fender washer might be good to add strength to the straps. Add hoops to the end so you could tie it to another person's roof rack, a tree, or the ground for rough weather/wind. The keyholed brackets use those same spring clips to lock it in rather than bolts or with the bolts for easier connection. I LOVE YOUR VIDEOS, they get me thinking, you have great ideas! Thanks!
@PatrickRemington
3 жыл бұрын
Thanks for the recommendations! Working on a 270 awning now!
@geekytechycool
3 жыл бұрын
Awesome diy solution, very cool Patrick!
@BeardedBassBrawler
4 жыл бұрын
I am highly impressed. There are some ideas you came up with that I wouldn’t have connected the dots on.
@billcashman4006
4 жыл бұрын
I see only one issue in your construction. You used steel flat bar to make your c channel. Steel and aluminium next to each other will cause galvanic corrosion which could cause the joints to fail. You can fix this by using aluminum flat bar instead of steel or put a piece of plastic or rubber between the two. Also if you use aluminum rivets on the steel, they could fail as well. Just a tip for future reference. Besides that, outstanding! Love your ability with sewing machine as well. I am always impressed with people who try to do it themselves before buying an expensive item
@PatrickRemington
4 жыл бұрын
Thanks! I’m glad you like the build! I definitely wasn’t thinking about the dissimilar metals when I built it but I did paint the flat bar before riveting it on and the rivets and bolts are galvanized which should have much less of a reaction with the aluminum. It feel like it would take a really long time to fail either way.
@wallywo7392
11 ай бұрын
What a great job, I'm after an awning tent, would have like to have seen how you do that. Thanks for sharing.
@deborahsmith9232
4 жыл бұрын
You are very talented and smart. Very interested project.
@official_starlord
4 жыл бұрын
This is really a fantastic build, and it looks like any pro/commercial built unit at first glance. Nice work man! Couple of recommendations...maybe for a future update: - Double-hinged horizontal supports would allow you to pull the whole thing out at once, and eliminate the need for the heater hose. - On that note, real deal heater hose snap clamps (like the ones you find in your engine bay) will not stress the rubber as much, but still provide a secure hold and super low profile - Condsider sewing those webbing straps to the inside of the vinyl cover so they don't fall on the ground/get mucked up/get lost. Again, this is an ingenious build and so inspiring for your fellow DIYers. Thanks for the great content 👍
@PatrickRemington
4 жыл бұрын
Cody Villa glad you enjoyed the video and thanks for the feedback! What is a double hinged horizontal support? Have a link to that?
@official_starlord
4 жыл бұрын
@@PatrickRemington No problem man! Thanks for the reply. Think of grasshopper legs, but with the "knees" folding inward to rest inside your c-channel when put away. A lot of RV awnings have them mounted vertically, rather than horizontally. I'll see if I can link a pic.
@brandinwetzel1549
Жыл бұрын
I know this is a few years old, but when making the legs you should have left the threaded part and have that part be the going to the ground. You could then make attachments for the ends of the poles depending on your terrain. Say you are a place with soft enough ground for a stake to sturdy the post, or in a parking lot and you want just a weighted attachment. Just a thought.
@traderryan713
Жыл бұрын
Cool build. Thats how its done!
@iliaskoutsouris630
2 жыл бұрын
Good job man,congrats from Greece.
@ByteMeDammit
2 жыл бұрын
Two to three strap ends on each side either with a buckle system or just Velcro to be able to strap the long sides to the supporting poles will allow the material to be stretched taut and prevent rain buildup and sag in the middle. Washers under all the rivets going through cloth and relief holes where the flat aluminum rides over the bolt ends for the supports. Better yet, integrate the support bolt such that it passes through the flat and cloth with an additional washer. Great overall design!
@PatrickRemington
2 жыл бұрын
Thanks for the suggestions! Love those ideas 🙏🙏
@ByteMeDammit
2 жыл бұрын
@@PatrickRemington Wow, happy to see you're still reading new comments a few years later. I looked but did not see a followup video. Are you still using the awning? Any modifications? How has it held up? Things you would do different knowing how it performed?
@snowhiterover
4 жыл бұрын
I used a heavt duty painters drop cloth....Scotch guarded it and it works perfect....the heater hose was genius....i epoxied the wooden dowels in.
@PatrickRemington
4 жыл бұрын
Nice!
@onemorep6
Жыл бұрын
Now you got my mind a thinking, great detailed build.
@PatrickRemington
Жыл бұрын
Mission accomplished 💪
@David-jv4fw
3 жыл бұрын
Everything presented was amazing. Great job and thank you. 🛠🤘
@SirWilliamGoes
3 жыл бұрын
Awesome. Added rivit gun and sewing machine to the list of tools needed
@PatrickRemington
3 жыл бұрын
Every man needs to know how to sew.
@theshop5331
5 ай бұрын
😍amazing build, awesome skill set, love the Jax sticker, FoCo here 😍 🤩and who could not smile with that kiddo on your lap🤩
@PatrickRemington
5 ай бұрын
Thanks man!
@camponwheels4088
3 жыл бұрын
well done. It's looks very professional.
@edwinhewson2354
4 жыл бұрын
I'd like to see you tackle a Batwing Awning!
@fixmeuphandyman
4 жыл бұрын
DO IT. Bacardi and Cola, do it do it.
@pmwilliams123
3 жыл бұрын
Heads up. You win. He done it. See new video from him.
@grumpybugger110
4 жыл бұрын
It might be worth sewing velcro loops to the side of the tarp to connect to the conduit. Maybe also add an extra bolt to either side of the far brace so you can use tie-downs if it gets a bit windy. Good build overall, I'm just going to buy one as I'm lazy.
@PatrickRemington
4 жыл бұрын
Yeah definitely.. I thought I had mentioned that I was going to do that in the vid but it must have gotten cut out
@grumpybugger110
4 жыл бұрын
@@PatrickRemington to be frank you may well have, i'm not the sharpest tool in the box :D
@gershwinstephen2543
3 жыл бұрын
You gave an exceptionally creative mind. Great project build.
@downdirty8543
4 жыл бұрын
Man....that’s sweet. One of the best DIY awnings I’ve seen. I have an F-150 and no roof rack, I’m about to build your awning and the roof top tent and if my wife gets mad I’ll be sure to send her your way since you are 100% responsible for my new found obsession lol! No seriously man, this is off the charts kool! Thank you! Keep it up!
@henrikm4657
4 жыл бұрын
Really cool project!
@sibco96
2 жыл бұрын
Thanks for posting parts links, especially the spring clips. This opens up so many possibilities.
@cowboyscoffee
4 жыл бұрын
Wish you where my neighbor. Great job 👍
@PatrickRemington
4 жыл бұрын
I wish you were my neighbor too. Mine are kinda lame. 😂
@TH3W1P30UT
3 жыл бұрын
Not going to lie, but there were a few parts I was thinking umm? But im glad I watched to the end. Those hose bits really seem to make it easier to set up and make it more adjustable. Well done.
@barryp4700
4 жыл бұрын
Great build! I love the stickers on the sewing machine, publicly declaring that it’s a man’s machine 😁 The wife’s one would just have the manufacturers logo on it, we pimp them....
@chuky151
4 жыл бұрын
My '57 Kenmore model 35 is a beast! Knowing how to sew is an essential skill.
@cooperken11
4 жыл бұрын
Well done mate, I’ve just folded my old awning in two around a tree so this great video will breath new life into what just looked like rubbish yesterday. Thank heaps.
@peem1244
4 жыл бұрын
Hi Patrick, super job on the awning. A real alternative if you've got the skills and the gear. Small point...Alum and stainless don't really like each other but it's an awning so no worry. I sometimes use the steel 'nail' from the pop rivets if i'm short of panel pins for woodworking, and i sometimes use the aluminum parts as solid rivets so i don't get the 'lump' on the back. I think your little apprentice has a bright future! Thanks for sharing Patrick. Stay safe and keep up the good work. 👍🖖😎🐶🦴😺🚙🌈
@TomNguyenalwaysfortylove
2 жыл бұрын
Awesome DIY, I love the flexible hose joint, that is just a great idea!!
@martinwise784
4 жыл бұрын
Good job. now just sew the retaining straps to the inside of your cover so they are always in the right palce when you roll it back up again
@joejojo4751
4 жыл бұрын
Hi great project, if you sewed some Velcro tabs along the sides of the material you could then strap it to the side poles once it was all deployed to stop it flapping in the wind. Joe
@PatrickRemington
4 жыл бұрын
Thanks! Yep! Definitely going to do that. I accidentally edited out where I said I was going to do that.
@cambobby2011
4 жыл бұрын
I'll make one and I'll try to add some bugs screens that I already have from a previous gazebo. I'll probably use some rivets like you did. But first, I'll let it marinate in my brain until it's cristal clear for me. I'll come back here to let you know guys. Tks for the brillant ideas to all of you.
@richardspearsii286
3 жыл бұрын
Work on your version ?
@christopherbiomass7155
4 жыл бұрын
It is well thought out. You nailed your criteria, plus sturdy, clever, etc.
Пікірлер: 704