Imagine the embarrassment of dying to a guy using an etch-a-sketch in an FPS game.
@gamingcat341
4 жыл бұрын
Mask 1O1 If that was me I would throw my computer across the room and buy an etch a sketch
@shoudehuang1244
4 жыл бұрын
basically a worse controller
@cmbaz1140
4 жыл бұрын
I defeated some people using my feet in COD 2...nothing special
@straypaperplane
4 жыл бұрын
There was one time I got carried in comp on csgo by someone who had never played cs before, and they were using their laptop's trackpad
@twoarrow9134
4 жыл бұрын
Ryan Rice there’s a guy with no arms or legs who has 509 fortnite wins with a mouth stick
@123TeeMee
4 жыл бұрын
Now hook it up to that mouse controlled etch-a-sketch
@Uzedrname
4 жыл бұрын
hmm yes the etch-a-sketch is controlled by etch-a-sketch
@KoDi82
4 жыл бұрын
Ah yes, engineering until redundancy, the best kind of engineering.
@sha-384thegreatest
4 жыл бұрын
Etch-A-Sketch but more real
@otesunki
4 жыл бұрын
ROFLMFBO
@Izolus
4 жыл бұрын
Finally, true analogue etch-a-sketch
@dragoncracker
4 жыл бұрын
I feel like this should be used with e-ink display to make an etch-a-sketch with a save function
@busteraycan
4 жыл бұрын
I think to avoid damage, display would have to be refreshed for every 4-5 pixels drawn next to each other, which happens nearly all the time. I'm not sure tho.
@dragoncracker
4 жыл бұрын
@@busteraycan Applied Science did a video on e-ink that i would have to revisit to have a better understanding of how driving the display would work
@wichaelalone
3 жыл бұрын
Eink
@TheJamesM
2 жыл бұрын
@@wichaelalone "Eink eink" is the sound made by a pig with an unusual accent.
@dizzydyzy
8 ай бұрын
Had the same idea seeing this.
@LoganDark4357
4 жыл бұрын
0:28 That "depends" hit my subwoofer HARD.
@SreenikethanI
4 жыл бұрын
haha
@otesunki
4 жыл бұрын
dePPPPPENds
@ajahnmara3316
3 жыл бұрын
dont have subwoofer, problem solved
@Ocawesome101
3 жыл бұрын
Fancy seeing you here! Small world, lol
@bob-ny6kn
2 жыл бұрын
You wear Depends, too?
@nicnl255
7 жыл бұрын
Awesome project. The shots are well framed, your explanations go straight to the point, both the mic and your voice are nice to hear. There's a lot of work in this video (and in the others too) and you deserve at least some recognition about it.
@Slash0mega
4 жыл бұрын
meh, he could do with some mixing down on the stereo channels and volume equalization. wearing headphones his voice is drifting all over the place. left to right, quite to loud, and on another video, his voice was in my right ear while he was standing on the right side of the shot.
@runforitman
4 жыл бұрын
the amount of elegant solutions your videos have is so inspiring I just know I would've gotten stuck with "I need more pins" and never have investigated this thank you for reminding me that problems should be investigated multiple ways
@sporehux8344
4 жыл бұрын
9:22 the right click cancels the line your currently drawing, how many hundreds of hours i've used ms paint and never knew about this.
@hakureicirno6059
3 жыл бұрын
It's not "cancel", it's because drawing with right button means using color 2 (so obviously, your "normal drawing", with left button, is using color 1), which is white on default. If you set color 2 to different color then you can draw in other color by using the right button. What's more astonishing, the eraser is not "erasing something off", it's just a brush with its color 1 and color 2 reversed. So by abusing color 2 you can even "erase" something to black.
@creator-link
3 жыл бұрын
Hakurei Cirno it is cancel I just checked, I set the 2nd color to a non white color and then drew a line, right clicked and it canceled it
@doggfite
3 жыл бұрын
@@creator-link I think that he means it's not a feature, it's not intended to cancel your line (there is an undo, who why would cancel be a feature to build into it). I think that it's just a side effect of it trying to draw in color 2 while it's already coloring and just not knowing how to handle that so it freaks out.
@creator-link
3 жыл бұрын
But it does cancel it, and it does not try it with the 2nd color
@sanjacobs6261
4 жыл бұрын
This was really cool until you said mouse acceleration
@pomegranatechannel
4 жыл бұрын
why
@floof5359
4 жыл бұрын
@@pomegranatechannel FOURTY FOUR SECONDS AGO
@NightVisionOfficial
4 жыл бұрын
yup, true disappointment
@OrangeC7
4 жыл бұрын
@@pomegranatechannel If you do anything other than browse on your computer it can get annoying
@isaacfullerton
4 жыл бұрын
Pomegranate It isn’t accurate to how an actual etch a sketch works, and it can be frustrating to use in some cases. Not usually just everyday work on a pc though.
@SustainedFuture
4 жыл бұрын
Next feature: turning it upside down and shaking to erase the screen.
@doggfite
3 жыл бұрын
*Shakes controller* Command Prompt: del C:\WINDOWS\system32
@anon_y_mousse
2 жыл бұрын
This is quite possibly the coolest electronics project I've seen in years.
@moth.monster
4 жыл бұрын
yo i can't believe they made Shenzhen i/o into a real thing
@JasperJanssen
4 жыл бұрын
Shenzhen io?
@AdamsBrew78
4 жыл бұрын
Jasper Janssen It’s a difficult assembler programming based logic/puzzle game on steam.
@Bluscream
4 жыл бұрын
Shenzen is a city in china
@Tuxfanturnip
4 жыл бұрын
@@JasperJanssen Shenzhen I/O is a puzzle game about designing and programming embedded systems for cheap Chinese electronics, squeezing out all the use you can get from limited hardware and optimizing for various parameters.
@RupeeRhod
4 жыл бұрын
Cool project, for the future consider volume of your audio. I'm currently playing the video at 2½ times my standard volume to have you audible, and the laser cutting was louder than your narration before it, but after as loud making me drop the volume to only twice as loud as my standard volume.
@Em.P14
4 жыл бұрын
uhm wouldnt it be easier to just take appart an old ball mouse and use its sensors for the ball ? EDIT: ah shit he even mentioned it, sorry
@arduinoguru7233
4 жыл бұрын
I may self love doing thing from scratch , many think it useless but I feel myself more free independent person .
@xpeng121
4 жыл бұрын
USB Mouse × SDVX Controller ✓
@xpeng121
4 жыл бұрын
@@ThatStella7922 XD
@JOELwindows7
4 жыл бұрын
This is your daily dose of Recommendation Mouse a Sketch
@fartsniffa57
4 жыл бұрын
Now build a mouse controlling the etch a sketch
@marshmellominiapple
4 жыл бұрын
and then plug the etch a sketch controller into the etch a sketch
@georgebeard2337
4 жыл бұрын
considering it's a step motor you could turn it into a game controller knob with force feedback (very tiny racing simulator wheel) and then all you have to do is make an etch a sketch game with force feedback.
@ajahnmara3316
3 жыл бұрын
now if you put one of them at a 90 degree angle and use a ball to move these around, flip it all upside down so that the ball rolls over the table when you move the contraption, you are back where we started
@ianbrown3689
4 жыл бұрын
I was kinda hoping this build was gonna be a giant etch-a-sketch with a ton of wires coming out of it. Saying I’m disappointed is a vast understatement
@theredstormer8078
2 жыл бұрын
3:47 gotta love those crunchy stepper drivers
@Spartanhero613
4 жыл бұрын
that stereo audio voice is hurting my brain
@DDMultitracks
4 жыл бұрын
HOTHEAD for me it was when he said any word starting with P without a pop filter
@MrBubz_
4 жыл бұрын
*Then you use a etch-a-sketch mouse to control a computer that controls an etch-a-sketch*
@isaacsegura
7 жыл бұрын
i guess i can make a etch-sketch. device with strings and puleys, and actually work it backwards, moving the center point to move the knobs
@akelli0429
4 жыл бұрын
-ты не сможешь нарисовать прямую линию в пеинте -подержите мое пиво
@shittestcat
4 жыл бұрын
Ok, i will translate - You can't draw straight line in paint - Hold my beer
@Scaramouche122
4 жыл бұрын
Minecraft's
@clicksandbeeps61
2 жыл бұрын
I was thinking of doing this myself, unless someone else had done it. Amazing job on this project, well done! 👍
@bob-ny6kn
2 жыл бұрын
Do it anyway. It will give you more ideas during the build/code as the pieces start to work together. My first etch-o-sketch (not copyrighted) was just pots on the user port of a C64. Totally useless and flawed, except for the fun of building and ideas it created.
@zachbrown7272
6 жыл бұрын
i love your videos so far, but the sound of the laser cutter is killing me ;)
@joefederico1501
4 жыл бұрын
This is basically how ball mice work if people even remember them
@4.0.4
4 жыл бұрын
Some people still use them, due to masochistic tendencies.
@ketmax2805
4 жыл бұрын
Trackballs are still very cool in this day and age. But ball mice are just sophisticated BDSM equipment
@proxy1035
4 жыл бұрын
8:30 that's usually handled by the OS not the mouse itself (atleast i think so), in windows it's an option known as "enhance mouse precision" and basically anyone i saw online said to disable it because it's trash.
@uggima1
2 жыл бұрын
:D LOVE the "ahhh but we can just not go low on the reset pin and still use the analog input"
@easlern
4 жыл бұрын
The encoder ladder is such a good idea 👏
@diamondjplayer5599
4 жыл бұрын
Im not sure if you realized but you just told us sound to build a SDVX controller... Thanks
@rascalwind
4 жыл бұрын
Love the point to point. Some of the best guitar amplifiers are hand wired point to point.
@bloodypommelstudios7144
4 жыл бұрын
Needs an accelerometer and be coded to start a new drawing when you shake it for a few seconds.
@evlshoots
4 жыл бұрын
personally, i don’t know much about the inner workings of much technology, and i’m learning along the way, i just wanted to mention that this reminds me of Evan Kales PS2 controller (essentially the same thing but it still uses start and select buttons) that used motors instead of rotary encoders because it was cheaper to recycle motors.
@jumpsplat120
6 жыл бұрын
Oh man, I've seen other videos of your and didn't even realize it. I really enjoy your stuff! Subbed.
@pokemonhacker01
4 жыл бұрын
Nice seeing The School of Life's Alain de Botton doing something different!
@SDWNJ
4 жыл бұрын
This is very much like the very first mouse which had two wheels on the sides of a box, at a 90 degree angle. The wheels would roll as you moved the box around on a surface.
@timh.6872
4 жыл бұрын
Obviously there's an issue of friction in that case, but I wonder if using smaller omni wheels undeneath the palm could solve that problem? Arrange them in a V shape to make it symmetric, and you could actually keep the encoders clean via closed wheel wells. I like this idea. I suspect we haven't bothered because it's cheaper to use an optical sensor.
@skatingskelly
2 жыл бұрын
@@timh.6872 consider: ball mouse
@Exaris79
Жыл бұрын
Actually this is useful for building 3D models as u have finer control on navigating the 3d environment. 3D mouses are very expensive and this might be a good starting point project.
@pannekook2000
2 жыл бұрын
unrelated to the cool project but you should sample that wood burner bc the noise it makes goes hard
@QUINTIX256
4 жыл бұрын
If you put an accelerometer in there and make it a keyboard/mouse you could map picking up and shaking to ctrl+z
@neonsilver1936
4 жыл бұрын
adhesive rubber pad on the bottom for grip would have really finished the controller nicely, imo. more of a user-comfort thing than necessary for the purposes here, though
@mheermance
2 жыл бұрын
I'm late to the party, but you're a madman, but in a good way.
@agustinsida8877
4 жыл бұрын
now that i know how to make usb devices, i feel more powerful..... extremely powerful
@IronKeroro
2 жыл бұрын
I haven't seen all of this video but these would probably work for sound voltex because the game uses two knobs and Unnamed sound voltex clone uses up/down and left/right mouse input by default.
@hampushallberg7590
4 жыл бұрын
interesting project, well done too I'd say. I've thought about an easier way of making one of these, using just a dissasembled ball mouse. The really old ones usually had two small rotary encoders, which could probably be replaced and used the same way as in this video. You would need some buttons added to use as Left and right click/reset if necessary. Just a thought though.
@trashtrash2169
9 ай бұрын
Somebody didn't watch the whole video.
@swirlingabyss
2 жыл бұрын
I love point to point wiring.
@ThisIsNotADrell
2 жыл бұрын
Oh the pain, such horror you have created. Now I will have to use etch-a-sketch for *everything*!
@tristan6509
4 жыл бұрын
you should add a dpi button to toggle between the speed
@SreenikethanI
4 жыл бұрын
or a DPI rotary encoder...?
@2.7petabytes
4 жыл бұрын
You sir, are BRILLIANT!!
@Sonnentau1
4 жыл бұрын
Wow That cheating on the !RESET Pin is some next level solution-ingenuity
@yeong126
4 жыл бұрын
The mouse button hold mode trigger was interesing. I would've done that by adding a new button just for that..which is not good.
@SreenikethanI
4 жыл бұрын
ikr
@keith429
4 жыл бұрын
This is like a ball mouse but you remove the ball and rotate the x and y sensors for the ball
@AstoundingAmelia
2 жыл бұрын
Id recommend adding a non velocity mode to it like with the toggle mode
@williammurphy6708
4 жыл бұрын
I was expecting Jimmy Carr to start cracking jokes.
@kaiyuanchen2107
4 жыл бұрын
I think you should change your profile pic as others may be misleaded into thinking you are a mere meginner in youtube
@someguystudios23
4 жыл бұрын
Sometimes when I need really straight mouse movements I take the ball out of an old mouse and move the little rollers.
@wellnotme9354
4 жыл бұрын
it just needs rgb, and black finish, and now it's Razer Etchatrine
@ClosestNearUtopia
3 жыл бұрын
@3:15 you sai: It supposed to work from high to low, but mine works high to open. High-> it results in an positive circuit. LOW-> ir results in an nutral circuit. Closed cicruit: Switches are creating closed circuits Open circuit: switches are breaking circuits. Active low-> closed circuit, not activated component. Can be called Normally closed signal/contact. Active high, closed circuit, activated component. Can be called Normally open signal/contact So tell me what is ''high to low ,isnt that the same as active low???? Do you mean high to open circuit something has to become high to result the circuit to be low? what you talking about. Are you talking about active high/low, the term high is used for indicating a present voltage or even bit. or has to be something high so you can open something up?? The term open just suggest the circuit is not closed. You are mixing two different terms for one purpose which makes totally not a sense. imo Hihg to low is equal of high to open, because you open (contacts) cirtcuit resulting in low voltages. and high to low I will not even try to explain.. Never use those terms crossed, it will not make sense, especially when you have to talk about the electrical stuff and how to install them mechanically. You will use the word open and closed only in the mechanical scene. nobody knows what you where talking about and if you even ment that electrical or mechanical if you cross those terms in the electronics. We only talk about open and closed state if we speak of contacts for everything else use high or low instead of open or closed. another example of what not to do int his scene is calculating imaginary numbers and still use i for indicating those numbers.. next to some sweet current calculations, goodluck crashing your rocketship because you could not keep up a good conversation and distribute information the right way, yes this is really important.
@clementpoon120
4 жыл бұрын
Open paint and you've got yourself a etch a sketch.
@matteopiomuscat2649
4 жыл бұрын
Now play Doom with that
@sanjacobs6261
4 жыл бұрын
I guess it wouldn't be too dissimilar to actually playing the original doom, haha
@bob-ny6kn
2 жыл бұрын
What are the hours of operation, and what is the location, of the Mitxela Museum of Art?
@EmilFihlman
8 жыл бұрын
This is really awesome!
@atakheli3608
4 жыл бұрын
This guy speaking minecraft redstone
@tails64dsntchannel8
4 жыл бұрын
Normal People: Oh Cool Etch-A-Sketch on PC! Me: CAN I PLAY SDVX WITH THAT?
@yeldardeerttoille
4 жыл бұрын
oh your poor laser cutter! sounds like it needs some oil, or some screws tightened
@skyjoe55
4 жыл бұрын
OMFG this is such a great idea
@TheRogue12
4 жыл бұрын
Can you talk a little louder? I have my volume at the maximum and I can barely hear you.
@Sqwaush
4 жыл бұрын
IS THIS BETTER
@SreenikethanI
4 жыл бұрын
*IS THIS BETTER NOW?*
@raymondbulte3891
4 жыл бұрын
Anybody else have no idea what the fuck they are watching but still like it
4 жыл бұрын
wym? point2point wiring is art...
@AshvinRanjan
4 жыл бұрын
Question: What was used for the USB adapter, I am trying something like this and am unable to find that they were using.
@trialen
8 жыл бұрын
Very nicely done.
@bland9876
4 жыл бұрын
If you cut this thing in half and add a physical button to it and then made four of them then you could use it to play Warlords
@pete3897
3 жыл бұрын
My gosh. Whisper whisper whisper so I turn my AV right up to hear you then at 4:00 off of a sudden that god awful noise!
@dominikwettel6800
4 жыл бұрын
C++ or C#?
@nrdesign1991
7 жыл бұрын
5:50 now *that's* evil
@stavrosps1238
4 жыл бұрын
i dare you to play minecraft with this
@maximbarry
3 жыл бұрын
9:21 nice weewee
@atomspalter2090
4 жыл бұрын
nice video
@notsurt
2 жыл бұрын
HDMI controlled etch-a-sketch for a very low frame rate monitor.
@Narigopia
2 жыл бұрын
Genius!
@Yevgen4000
4 жыл бұрын
wait you can press the buttons to toggle an etch a sketch i didnt know that
@ez4pz
4 жыл бұрын
Next video: I turned my wood lathe into a MIDI synthesizer.
@theenderman9042
4 жыл бұрын
Only Etch-a-Sketch fans will remember.
@MLFranklin
5 жыл бұрын
That is really cool.
@girrrrrrr2
3 жыл бұрын
This could have been done differently. Just take an old ball mouse, take it apart, move the encoders and remount them, vertically And boom. done lol
@BlueClefto
4 жыл бұрын
Well, I have the most recent mouse technology.. the BALL mouse. it's weird that i'm the only one using it. I'm from the future.
@leavewe
4 жыл бұрын
did anyone else hear 'toggle mode is enabled by holding one of the mouse buttons when plugging in the usb' and then try it on your mouse? i was disappointed to not have my mind blown , w,
@doggfite
3 жыл бұрын
11:30 it was at this point that I realized his name was not *Mix*tela...
@TheToric
3 жыл бұрын
Isnt mouse acelleration usually an OS function?
@Toasterloaf
3 жыл бұрын
Has anyone ever told you, that the manner in which you speak in your videos, sets-off binaural cues for ASMR sensations? If you could keep your machinery quiet in future videos when explaining your latest invention, it would be greeted with tremendous appreciation.
@OnnieKoski
4 жыл бұрын
I was t watching the screen when you started the laser clutter video and I thought you had started playing some very crunchy chip tunes.
@jay89452
4 жыл бұрын
beats a mouse. I haven't even watch the friggin' video yet I just came here to say that.
@pizzahutjr7925
2 жыл бұрын
make a etch a sketch screen with working etch a sketch controls
@B_dev
4 жыл бұрын
Now send it to anomaly and have him play csgo with it
@paulgupta2454
2 жыл бұрын
what kind of laser did you use there? k40?
@mylofryett9160
4 жыл бұрын
Controlling a Etch-a-sketch with a computer while controlling rhe computer with an Etch-a-sketch
@drexxco
4 жыл бұрын
why do you sound like tom scott?!
@Sithhy
4 жыл бұрын
It's not like 2 people can't have a similiar voice
@drexxco
4 жыл бұрын
Sithhy I never said so?
@SreenikethanI
4 жыл бұрын
@@drexxco but the way you asked sounds like you didn't believe that two people could have a same voice well probably "you sound a lot like TomScott" might've been better?
@Pockeywn
9 ай бұрын
i’m actually cracked at the etchasketch. i could game on this.
@Pockeywn
9 ай бұрын
i’m really bad at most games though..
@beniven-dev
10 ай бұрын
me realizing his channel name is his name backwards
Пікірлер: 245