USE discount code TW-WHEELS for a 10% off on all LIGHTBICYCLE wheels and 5% off on all rims!
@TecraTube
Жыл бұрын
so I'm not sure what is better - the intro part of video OR the chief mechanic giving it a once over 😀
@TwistedWheels
Жыл бұрын
Haha thanks John! No bike is leaving the shop without chief mechanic’s seal of approval 😆
@anton.sokolov
Жыл бұрын
Из Севкабеля в Лондон! Чума! Сижу и улыбаюсь от уха до уха! Байк космический вышел!
@MiceSkillz
Жыл бұрын
Damn what an underrated channel! Ur build videos are some of the best I’ve seen! Instant sub, been watching ur videos all night
@TwistedWheels
Жыл бұрын
Thanks mate. Comments like these keep me going 👊🏼
@timdixo
Жыл бұрын
Love it,light but still so functional…no idiotic integrated cockpits,a cinch to tweak position.
@TwistedWheels
Жыл бұрын
Agree
@firstinhealth
9 ай бұрын
Kia Ora Oleg, I've just discovered your channel. What a breath of fresh air you are! I enjoy your artistry & devotion to creating bikes that are not only aesthetically beautiful but also truly unique. Damon from New Zealand
@landonthings
Жыл бұрын
Beautiful build and great video! Thanks for sharing, enjoy the ride!
@TwistedWheels
Жыл бұрын
Thanks!
@SayMcGillicuddy
Жыл бұрын
smashing build, very envious. Love the powder blue colourway
@simonwatkins9431
Жыл бұрын
Gorgeous bike and a great video to show it off.
@TwistedWheels
Жыл бұрын
Thanks Simon!
@projectcycling
Жыл бұрын
Man, gorgeous build! Anyway these new AR25s are really nice
@aliaksandrkharashun4539
Жыл бұрын
Респект за такой байк,и за слова на фреим сэте)
@georgprenzel146
5 ай бұрын
Wow 😍 what an amazing bike. Thanks for this real motivational video.
@wolfgangvonf16
9 ай бұрын
U´re an absolute artist and Your builds are so much more interesting than everyone else´s more mainstream ways - Peace
@TwistedWheels
9 ай бұрын
Thanks mate!
@AdamWilkoszarski
Жыл бұрын
Great bike! It really is a dream build!
@RanchoLaEscondida
Жыл бұрын
Amazing build as always!!! Currently building my first gravel bike using a Revel Rover frame. I’m going to use many similar components as uou except will use Berd spokes to make the wheel set around 800g.
@TwistedWheels
Жыл бұрын
Sounds like a great project! I’ll be using BERD on my next XC wheelset.
@grantmartin829
Жыл бұрын
Such a good video and it was a great ride. Saw so many more details on the bike than I did in real life 🙌
@TwistedWheels
Жыл бұрын
Thanks for showing the route mate. Looking forward to the next ride in Kent!
@genqua228
Жыл бұрын
Love the video, what an amazing built!
@festerofest4374
7 ай бұрын
I love it! I want it! With the lighter wheel set it's about 7 lbs/3.1 kilos lighter than my gravel bike... I can't imagine how nice it must feel.
@JeremyLawrence-imajez
Жыл бұрын
I like the detail of the chain spelling out TW in overhead shot at start.
@user-ot6gw5yi9c
Жыл бұрын
Каталка в конце шикарная. Вес велосипеда впечатляет.
@jamiepeirce526
6 ай бұрын
Crazy to think the steel touring bike I jut built is almost twice as heavy. Now all I can think about is building another. Thanks for the videos.
@mikegluckman3132
Жыл бұрын
Gorgeous build dude!
@TwistedWheels
Жыл бұрын
Thanks mate!
@skryukov1
Жыл бұрын
В поддержку канала! 🔝🤘✊
@TwistedWheels
Жыл бұрын
Спасибо!
@lanceoa
Жыл бұрын
Huge fan of weight weeny builds however I recently added a RockShox Rudy fork and it has absolutely been a game changer!!! Highly highly recommend!!
@TwistedWheels
Жыл бұрын
I prefer redshift sports stem + high volume tyres for gravel. But it’s great that we have a choice of components for all tastes 👍🏼
@lanceoa
Жыл бұрын
@@TwistedWheels I have yet to try suspend the rider type tech vs traditional dampening…. I know it transformed my nearby singletrack course from doable to quite a blast and as fast as hardtail mtb that I ride with
@davefave4351
Жыл бұрын
I recognise that coffee stop/bike shop at the end there! A quality build!
@TwistedWheels
Жыл бұрын
It’s in Penge :)
@davefave4351
Жыл бұрын
@@TwistedWheels Aye, I know Winnie. I'll pop in and have a word over the weekend and have a look out for what are obviously your builds - I'm too old and past it to ride a bike anymore so just ogling past glories!
@neilk22
7 ай бұрын
So much detail in this video thats easy to miss. The steerer tube shape and the space for the hydraulic cables and the cannondale spacer modification could be a 30min "how to" in its own!
@TwistedWheels
7 ай бұрын
I know! And that’s what other KZitemrs would probably do and make 10 videos instead of one (which would be better for channel growth). But I value your time and try to provide as much value in one video as possible ✌🏼
@neilk22
7 ай бұрын
@@TwistedWheels totally appreciate that - but there is an oppertunity (based on popularity) to revisit some of your optimisations. Another one ive already adopted is the move to RX4, totally broke my stigma on 4-pot calipers.
@TwistedWheels
7 ай бұрын
@@neilk22for me, optimisation is making one video where I build the whole bike and showing all interesting things about it rather than talking about the same bike for the whole year upgrading one part after another. Too many interesting builds happening in 2024 to spend the whole year talking about the same bike 🤷🏻♂️😃
@lkeh67
Жыл бұрын
Well done, I've also done first rides with my build up. Force, DT350+Carbon and Ritchey landed at 8.0 kg. I enjoy the feeling how it rides also very much.
@TwistedWheels
Жыл бұрын
Congrats on your new build! Also Syre, I assume?
@lkeh67
Жыл бұрын
@@TwistedWheels sure
@philmeanor2638
Жыл бұрын
Awesome as usual. Then there are two of u. I could get much more done if I could do that. Kee up the great work. -Phil
@TwistedWheels
Жыл бұрын
Haha, I definitely need the second me to get everything that I plan done.
@trackar134
8 ай бұрын
Inspired me to do a similar themed build, but used a winspace g2 and mostly AliExpress parts. Waiting on a few parts but should weigh in at 6.74 kg with pedals and bottle cages. All in cost was about $3,000 usd. Not too bad!
@Pedalfix
Жыл бұрын
Loving your channel! Can I ask... what Ti bolt kit did you use for those new Force leavers (Risk RT120 or RT212) and what were the jockey wheels again?
@h-works9071
Жыл бұрын
Nice build! Great video!
@TwistedWheels
Жыл бұрын
Thanks guys!
@user-dr8hf4hg8e
Жыл бұрын
Волшебный вел!
@ilanpi
Жыл бұрын
Congratulations on your new bicycle! I'm not sure about the carbon stem, as far as I can tell, these are generally heavier than light aluminium stems, especially Extralite which has a nice computer/GoPro mount. I also believe that your choice of Tubolito inner tubes is lighter than tubeless, as the sealant is generally heavier (and messier). Finally, I like KCNC disc rotors for religious reasons. By the way, I have the same Park scale and it seems to vary by as much as 100g when repeating weighing the same thing.
@TwistedWheels
Жыл бұрын
Extralite stem was my original choice, but Extralite advised not to paint their stem for some reason 🤷🏻♂️ Also I think that carbon stem looks better with this frame as it has the same shape as the frame and they are usually stiffer.
@ilanpi
Жыл бұрын
@@TwistedWheels Thanks for the explanation! I went to a real bike shop today for the first time in years, and there was just this sea of bikes with proprietary stems 😱. I'm not sure about stiffness concerns on this type of bike, since you want shock dampening. One of my favorite bicycles was a Ritchey Road Logic, which was a real noodle.
@bennettshfd2
Жыл бұрын
Love it!
@minminnie2312
Жыл бұрын
Beautiful build! How's the shifting for axs rear mech on rotor 12 speed cassette?
@TwistedWheels
Жыл бұрын
Thanks. Cassette works great. I also have Rotor 11-39T on my Colnago road bike.
@cb6866
Жыл бұрын
Thanks Oleg...that bike looked amazing , AND...uh , dude , you are hilarious ! You , in the background , spinning a chain like a stripper...ish ?
@KMAN10694
Жыл бұрын
do you know if the frames are actually built in St. Petes?
@DrunkDrynasty
9 ай бұрын
Also I really like the idea of modifying your Cannondale spacer for internal cable routing. Do you have to worry about water getting in there? Does it just train out the bottom of the frame? Or is there a way to seal it where the cables enter?
@antonsallinen
Жыл бұрын
Круто! Очень полезно! Спасибо автору
@bennettshfd2
Жыл бұрын
What was the total build cost in USD?
@Sinc28-95
Жыл бұрын
Top video as always! Random idea, would you do a video on lightweight clothing and gear that you use? Helmets, shoes, repair kit etc - might be good for weight weenie to look at all their gear not just the bike
@TwistedWheels
Жыл бұрын
Thanks Callum. I might disappoint you, but I don’t weigh my clothing :) When it comes to clothing I pay more attention to the looks and qualities. It’s not always about the weight :)
@DrunkDrynasty
9 ай бұрын
Are you Austrian? You sound a little bit like Arnold. It’s awesome and your content is even better! I was looking for a channel that builds do-it-all gravel bikes. I live in a city and also use my gravel bike for commuting but take it on the roads and trails every chance I get. I’m very interested in learning how to build wheels like these. Do you have a video that goes into detail about how you started building wheels and what you need to get started? Thanks! Just subscribed 🤙
@TwistedWheels
9 ай бұрын
I’ll take it as a complement haha. I don’t have educational wheel building videos, but one of the best ones I’ve seen is from Ali C: kzitem.info/news/bejne/0WiguqaAknx4l20si=vxAfxvx32h4Fx_vS
@mlee6050
6 ай бұрын
How are the carbon wheels? I been looking at aluminium frame and rims to make sure they last longer and worry less on rim scratches
@TwistedWheels
6 ай бұрын
Carbon wheels are good :)
@bennettshfd2
Жыл бұрын
What was the temp outside when you were riding?
@TwistedWheels
Жыл бұрын
-3 degrees
@rickpatinama5363
Жыл бұрын
Where did you buy the clamping hardware for the shifters?
The light wheels rims are the unpainted version or the painted one? Not sure which one to buy
@TwistedWheels
4 ай бұрын
Unpainted PRO
@craycraykovich6996
9 ай бұрын
If you had read the instructions, you would have found out that the wiring is done from the back to the nose, then conductors and similar cable catchers will not be required
@craycraykovich6996
9 ай бұрын
Rear wiring according to the instructions is done instantly without help
@AlexeyChepenko
11 ай бұрын
Where did u paint the Bontrager stem? What’s the color in RAL?
@TwistedWheels
11 ай бұрын
On Syre factory
@jpragmatic7759
Жыл бұрын
Nice one! Those wheels are on my wish list! Let us know how you get on with them :)
@TwistedWheels
Жыл бұрын
Thanks, will do!
@mkalajian
Жыл бұрын
Amazing work. Love this and the aethos build. I’m wondering what the trick to getting the xx1 chain to work with xplr is. I’ve had some trouble dialing it. I’ve got red crank/garbaruk ring. Red xplr rd / cassette. Could it maybe be the garbaruk pulley wheels? Rotor cassette? Both? Thanks!
@TwistedWheels
Жыл бұрын
Thanks. It’s the cassette. If you are using a sram road/XPLR cassette, you need to use a flattop chain
@TheOkinawaBoy
Ай бұрын
Nice bike. Do you think AR25 wheels will be good as climbing wheels on the endurance bike? with 30mm GP5K and latex tube?
@TwistedWheels
Ай бұрын
For sure. That’s the setup I use on my road bike, just with Tubolito tubes.
@TheOkinawaBoy
Ай бұрын
@@TwistedWheels thank you. I was concerned about 70psi max allowed pressure. I have their 45 mm wheels which are great.
@НазарЗавертаный
10 ай бұрын
Что скажешь насчет Furious Fredов?
@tomastorres7497
Жыл бұрын
What did you use under the steam? There seems to me two small black things around your cables?
@TwistedWheels
Жыл бұрын
I am using some cable connector (not sure how it’s called)
@JC-un4bg
Жыл бұрын
What route was that . Didn’t look like London
@KNURKonesur
Жыл бұрын
Looks great! Not a bike for me though, I'd break it in half before even mounting bikepacking bags on it :P
@TwistedWheels
Жыл бұрын
Are you weighing 200 kg? :)
@perasperaadastraandback
Жыл бұрын
Приветствую из Белгорода,не самого мирного города😢 Я русскоговорящий,и мне очень сложно воспринимать русский акцент, что забавно. Порой по паре раз пересматриваю моменты в ваших видео, чтобы понять модели деталей, которые вы ставите. Я думаю и native спикеры тоже иногда могут не понять, было бы отлично добавлять подписи всегда,а не только с весами. Некоторые люди наверняка хотят повторить хотя бы часть билда. Лично я ищу другие обода и расширяю горизонт по покрышкам,у меня тоже challenge сейчас, но strada bianca, и ещё kenda Мой китай карбон 7.8 кг весит с топталками, но на механических тормозах. А вышел мне он в 95 тысяч рублей, на тот момент 1300$. Сейчас купил LTWOO gr9 гидравлические, буду ставить их F#€K это мерзкое СВО. Однажды мы возьмем в узды кровожадных быдланов
@TwistedWheels
Жыл бұрын
Привет. Ты можешь включить английские субтитры, они автоматически генерируются Ютюбом.
@TwistedWheels
Жыл бұрын
Ещё все детали есть в описании к видео ;)
@perasperaadastraandback
Жыл бұрын
@@TwistedWheels 🤗 мерси. Просто я нудный😂 иногда вы пишите,а иногда нет, я об этом, судя по моим наблюдениям люди далеко не всегда открывают описание. Субтитры спасибо, но интереснее слушать, тем более они нередко косячат, причём забавно чаще всего. Спасибо за видео и ответ, здровья вам и вашему главному механику❤
@andrejandre2732
Жыл бұрын
Классный велосипед получился! ХВ
@philipaddyman7402
2 ай бұрын
How cab it be light at 7am yet -3 in London? If you fake the weather, what else are you faking?
@TwistedWheels
2 ай бұрын
lol. Will invite you to all my rides next time as an auditor hahaha
@61vik
Жыл бұрын
Какие подшипники во втулках? Типоразмер? Сейчас стали везде 6802 ставить и это провал...
@Skukota
Жыл бұрын
Beautiful build! Could you please share what's the computer mount you're using?
@sbart23
Жыл бұрын
Great build, what BB did you opt for?
@daniels.2720
Жыл бұрын
@ 1:52 > Chris King T47 internal cup
@captainsparrow6400
Жыл бұрын
Tubolito on gravel bike.. gluck
@user-ls2pn1xb3o
Жыл бұрын
Аееее Красавчик так держать
@relaxe4you23
Жыл бұрын
Whats the complete price for this build?
@lancescarborough1
Жыл бұрын
What is the tire clearance for that frame my friend?
@laurinweisser4967
11 ай бұрын
How much did you spend?
@matthewdreyer5058
Жыл бұрын
where did you get the Ti shifter bolts for the sram rival axs
@TwistedWheels
Жыл бұрын
On Aliexpress
@dzhuk
Жыл бұрын
Hyi vione!
@TwistedWheels
Жыл бұрын
Hyi indeed!
@JK_Fansky
Жыл бұрын
Получилось отлично! Во сколько встала сборка?
@fontpartners1695
Жыл бұрын
Lightbike AR25 + H-Works hub. Lightweight products, but do they last? And then for offroad? That is the question...🤔🤔
@TwistedWheels
Жыл бұрын
I’ve been using Lightbicycle rims on my road, CX and MTB bikes for many years and never had any issues, so I’m pretty confident. As for H-works, they are a new player on the market, so durability to be confirmed, but just from the initial observations they are made pretty well and I’ve done about 700km - so far so good 🤞🏼
@jeremybrechbuhl1573
Жыл бұрын
Are the pulley in 12/14 teeth good for Sram Red ? Did you notice something ?
@TwistedWheels
Жыл бұрын
Yes, they are good. No issues
@jeremybrechbuhl1573
Жыл бұрын
@@TwistedWheels thanks ! Very good video 👍🏻🤙🏻✌🏻
@chrismccannIRL
3 ай бұрын
Imagine doing it with a crux frameset. Surely sub 7 easily
@TwistedWheels
3 ай бұрын
Watch my latest video 😂
@chrismccannIRL
3 ай бұрын
@@TwistedWheels lol I see that now. Superb. Love the Aethos one you did routing the cables internally. First saw it on GCN then watched the video you did. Bought an S Works Aethos on the back of it. Cheers
@danalec4742
Жыл бұрын
Хуй войне! Make bikes, no war. That's my moto now 👍 Wonderful work. A bike made with love and passion. The most important components I assume. I like the idea of using TPU tubes. This makes tyres and wheels choice more affordable . I am using these and I have no complaints. Good build. I wonder if you really use Chinese 'quality' groupset components in your next project. I believe that I'm not the only one building bikes and loving alternatives. All the best.... Велосипед 😂😂😂
@TwistedWheels
Жыл бұрын
Thanks man!
@wandafool1
Жыл бұрын
Amazing build! What helmet are you wearing?
@TwistedWheels
Жыл бұрын
Thanks Oliver! It’s Sweet Protection Outrider.
@wandafool1
Жыл бұрын
Thanks for replying. Can I find out where you bought the h works hubs from? Can't seem to find them anywhere online. Did you get them straight from h works?
@johnbusby6
Жыл бұрын
can you share the total cost of the build
@mnlh3b
Жыл бұрын
can you run the rotor 11-46 casette with the Sram XPLR Rear mech without any modification?
@TwistedWheels
Жыл бұрын
That’s what I do!
@Hunttherider
Жыл бұрын
Awesome. Thought 45T was max. Stoked that the 11-46 will work!
@jasonbaker4275
Жыл бұрын
I wonder how light you could get an S-Works Crux?
@TwistedWheels
Жыл бұрын
Crux does not meet all my expectations of what I want from a gravel frame, but purely weight wise it will be around 500g lighter
@JorisBokkerink
7 ай бұрын
Tenet?
@emanuelpradera9717
Жыл бұрын
Nice Build, what's the final cost?!
@vanCapere
Жыл бұрын
How do you like the saddle? Maybe even compared to the Specialized Mirror ones?
@TwistedWheels
Жыл бұрын
Love the saddle! Spent 4 days in Scotland doing rough gravel and it’s been super comfortable with the PNS Escapism shorts. Was doing road trip in Spain on a Specialized mirror saddle and it started hurting after first 60km, so resulted in 2.5 days of pain :( But saddles are very individual. All Bjorn saddles work very well for me.
@vanCapere
Жыл бұрын
@@TwistedWheels Thanks! Guess I'll just have to try it then. Been honestly quite happy with my Power Mirror - if only it weren't so heavy haha.
@user-ec3pw2kj1l
Жыл бұрын
Those Hubs, did you buy them polished from H-Works? Inquiring minds want to know. Also, you have some very trick wheels built over the course of several build presentations, I would be great if you could talk about ride quality and durability after riding them several times.
@TwistedWheels
Жыл бұрын
Yes, I bought the hubs polished. No issues with the wheels, really enjoy riding them.
@user-ec3pw2kj1l
Жыл бұрын
Thanks for the reply@@TwistedWheels I visted the H-Works site and did not find polished as an option. I was also interested in carbon spokes from Brisk Wheels and they said they don't sell their spokes separate from their wheels. Any suggestion on sourcing carbon spokes? Thanks again!
@ikkeikke4419
Жыл бұрын
Beautiful bike, where can i buy the saddle and -post ?
@TwistedWheels
Жыл бұрын
bjorncycles.com
@vasiliipopov416
Жыл бұрын
I don't even want to think about how much it all costs
@CurdPattysRoll
Жыл бұрын
Envy..
@ionutcelgroaznic
Жыл бұрын
is that a russian made frame?
@konstantinrudakov3331
Жыл бұрын
It is.
@dferrerll
Жыл бұрын
Berd spokes for when? Some1 told me about them
@TwistedWheels
Жыл бұрын
BERD for XC bike. Gravel wheels could be built below 1kg even on steel spokes :)
@Jacob99174
Жыл бұрын
Some1 is only one key stroke shaved off from “Someone” lol
@alexmur5751
Жыл бұрын
how much the build?
@kami4542
Жыл бұрын
I calculated with quick google searching and without the hubs (price not readily available, you need to ask for a quote) it's at least 8000$
@zanekoogler4763
Жыл бұрын
You could find almost any aluminum stem and save hundreds of dollars and 20-40 grams.
@TwistedWheels
Жыл бұрын
I paid £50 for this used carbon stem on Ebay and I like how it looks with this frame in terms of overall aesthetics. To save 40g compared to this 120g stem, you would need to use either an Extralite stem or Intend stem. Both cost £180. But again, it’s not always about weight! In all my builds, I am trying to achieve beautiful looks and keep the bike functional while keeping the weight low.
@sanaez
Жыл бұрын
КЛАССНЫЙ ВЕЛ ВЫШЕЛ
@sergeybusorgin7873
Жыл бұрын
Одной звезды в системе хватает?
@TwistedWheels
Жыл бұрын
Более чем
@sergeybusorgin7873
Жыл бұрын
@@TwistedWheels Понятно. Однако при подъемах как? Ну если торчки метров по 50-80 с градиентом 15-20%, или длинный подъем километров на 5-7 со средним градиентом 5%? Я сдохну на одной звезде...
@TwistedWheels
Жыл бұрын
@@sergeybusorgin7873 у меня 40/46 передача :) это эквивалент 34/39. сколько надо-то?
@sergeybusorgin7873
Жыл бұрын
@@TwistedWheels Ну лан, понял. У меня на одном из треков спереди 40 стоит, ну...как-бы...Поработать иногда приходится! Ну на то он и вел, крутить надо!😂👌🖐 Че там с crux? Продвигается?
@TwistedWheels
Жыл бұрын
@@sergeybusorgin7873 крукс я продал
@bike_holiday_live
Жыл бұрын
Включите субтитры!
@TwistedWheels
Жыл бұрын
Я не отключал. Возможно ещё не сгенерировались 🤷🏻♂️
@Aeroskiii
Жыл бұрын
Frame is super heavy tbh
@TwistedWheels
Жыл бұрын
Lighter than Open Wide and 3T Exploro that have similar tyre clearance, but don’t have internal routing and threaded bb. It’s also 250g lighter than carbon Cannondale Topstone and 300g lighter than Trek Checkpoint, and definitely much lighter than Specialized Diverge. So I would not call it “super heavy”. It is not the lightest - for sure, but the only one that meets all my requirements.
@Aeroskiii
Жыл бұрын
@@TwistedWheels imo just use a ht frame like the specialized epic ht at 750g
@TwistedWheels
Жыл бұрын
@@Aeroskiii with long front triangle, long chainstays, designed for high 29er forks, no invisible cable routing and limited space for bikepacking bags - nah, i’m good thanks :) There is a separate video on my channel about why I chose this specific frame and what other options were - there are certain things I wanted my frame to have.
@Aeroskiii
Жыл бұрын
@@TwistedWheels nonetheless if a mtb frame is 750g and the gravel bike is over 1100g
@TwistedWheels
Жыл бұрын
I also have a Cannondale F-Si Hi-Mod frame that weighs 890g - so what? If you watch my previous video, you’ll find out that I did not have a goal to build the lightest possible gravel bike, otherwise I would have gone for Spesh Crux. But I didn’t.
@pmcmpc
8 ай бұрын
Was interested in the Syre until I saw the geo ... it's garbage. Short front center, short wheelbase, slack seat seat tube, relatively steep head angle. Geo doesn't match the tire clearance at all.
@TwistedWheels
8 ай бұрын
Have you ridden it to say that it’s “garbage” or you are an armchair expert? 😄 I’ve ridden this bike for a year and it’s the best gravel geometry I’ve tried: this bike gives the punchy road bike feel, but at the same time allows for 29x2.0” tyres. I’ve done gravel racing, cyclocross racing and some rough bikepacking in Scotland on this bike and I absolutely love it. But of course if your skills doesn’t allow you to handle the bike with the short geometry and you need a long base and slack head tube angle like on a mountain bike - then Syre is not for you 🤷🏻♂️
@PaulLightman
Жыл бұрын
Жесткий акцент :)
@TwistedWheels
Жыл бұрын
Учился у лучших! 🤣
@PaulLightman
Жыл бұрын
@@TwistedWheels London is the capital of Great Britain!
Пікірлер: 177