Hi! Really sorry for the late reply, I used washi tape to wrap the top casing & used an x-acto knife to clean up the slack. In retrospect I probably should have kept that extra slack to wrap around the top entirely since just small sections are starting to peel, but up until now it's been holding up pretty well. Maybe if I ever decide on getting another keychron or something I'll make a tutorial idk
@kudziisuuASMR
8 ай бұрын
was that tape you put on the top plate? im confused thank you
@kozai
8 ай бұрын
If you’re talking about 4:36 then yeah, it was washi tape I used to cover the top half of the case
@therealmorganfreeman2875
Жыл бұрын
How hard do you have to push on the key caps for it to fully lock in place I feel like I have to give mine a good amount of pressure before they lock in, is that normal. It is new btw
@kozai
Жыл бұрын
Hi! I'm really sorry for the extremely late reply, you probably already have it figured by now but I'll still try to answer. If you're talking about just putting the keycap on the switch, sometimes depending what keycaps you get the new ones usually have a tigher tolerance, which isn't abnormal but I don't think it's normal either. I've seen some cases where keycaps actually break/chip because of the said tolerance.
@neogem200
2 жыл бұрын
Really nice q3, the use of type is probably the best I have seen on a keyboard ever the way it matches gmk red samurai is perfect. Just got my q3 yesterday put inkv2s and gmk laser while I wait on parts to mod and build it to my liking.
@kozai
2 жыл бұрын
Yo! Sorry for the late response, but thank you so much, and good luck on your build if you haven’t already finished it!
@neogem200
2 жыл бұрын
@@kozai Sadly my q3 is still stock, I am waiting on the polycarbonate plate, but will be doing a green theme with some tape inspired by your video. I hope to see more videos from you maybe modding the q3 or some other boards I like your creativity.
@kozai
2 жыл бұрын
@@neogem200 Much appreciated man, thanks for your support, it's the first time anyones ever complimented my creativity, I'm also working on a new video at the moment so defintely look forward to that soon! And if you don't mind me asking, by the time you finish modding your keyboard, do you want to share it on my discord server? My friends and I would love to see it.
@neogem200
2 жыл бұрын
@@kozai Excited to see your next video, and depending on how well the mods go I am down to share it on your discord.
@Congclose
2 жыл бұрын
Nice
@roderlol
2 жыл бұрын
Hey what tape did you use for this? It looks pretty good
@jacobhayman8856
2 жыл бұрын
was wondering thwe same thing
@kozai
2 жыл бұрын
Hello! Sorry for the late response, I got this tape in a pack from a friend of mines, I don't know where they got this tape in particular, but maybe you could find it off etsy I think
@takeshisatou2371
2 жыл бұрын
Its washi tape. You're welcome.
@roderlol
2 жыл бұрын
@@takeshisatou2371 my brother in Christ there are about 2000 variations of washi tapes online, I was hoping for a little more specification but it is what it is
@takeshisatou2371
2 жыл бұрын
@@roderlol mate, i've already helped you identify what type of tape it is. All you had to do is to put into amazon. Ain't rocket science.
@bigdasu83
2 жыл бұрын
Where did you get the lube station? Edit: End build was very nice looking and sounding. Very impressed!
@kozai
2 жыл бұрын
Hello! Sorry for the late response, I bought it off etsy but the seller doesn't make them anymore
@bigdasu83
2 жыл бұрын
@@kozai boogars but all good. the glorious station looks very inviting to use just liked the angel that one can be set at to make it easier and more ergonomic.
@ddot9182
2 жыл бұрын
Best Q3 I've seen
@biohazardmonkey12
2 жыл бұрын
yooo bro what tape did you use to customize the frame of the q3?
@wetcow
2 жыл бұрын
I just bought this board and keycap set, but I got the yellow milky pros. I am so exited. Thank you for posting this so I know the gmk keycaps will fit on the Q3! :D
@1Vnarine
2 жыл бұрын
thank you for not talking.
@ToroKeVODs
2 жыл бұрын
YOU NEED MORE LIGHTS, TRUSTT MEE, MORE LIGHTS
@jigsawmental3224
2 жыл бұрын
Hi, do you think the Drop Red Samurai TKL will fit on the Keychron Q3 knob version? As yours are non knob version.
@kozai
2 жыл бұрын
It should, the knob shifts the function keys slightly and that’s it. So you should be fine.
@jigsawmental3224
2 жыл бұрын
@@kozai alright, did you get the TKL version of the key cap?
@kozai
2 жыл бұрын
@@jigsawmental3224 Yeah, saves me some money compared to the full kit
@clement990
2 жыл бұрын
are you selling this :( how much
@kozai
2 жыл бұрын
Hello! Sorry for the late response, I'm not selling this since I'm still new to the keyboard scene. This is my first build after all so it's more just for my enjoyment & experience. Maybe when I grow bigger I might be more open to build more and start selling, I hope you can understand, thank you!
@plsw9250
2 жыл бұрын
Where did you get the pom plate?
@kozai
2 жыл бұрын
I got it off etsy, if you search up "pom plate" it should be there
@RaiderFMX
2 жыл бұрын
Dude what tape is that
@kozai
2 жыл бұрын
Hello! Sorry for the late response, I got this tape in a pack from a friend of mines, I don't know where they got this tape in particular, but maybe you could find it off etsy I think
Пікірлер: 38