I always wanted to build one of these. Even bought plans to the Q1 when I was 16. Now I'm nearing retirement it might be time.
@TON_KROW
2 ай бұрын
HAVE YOU GOT STARED YET,
@teslaroundup
5 ай бұрын
Hey Kim, I built one of the first Q2s - N82SC - and was the first customer to fly with the non-laminar flow carbon fiber canard. It was my experience that resulted in them designing the reflexer. Also was the first to put a speed brake on it, something the factory later did as well. A couple of years later I turned it into a Tri-Q. I hope to make a video some day. Hope you don't mind me referring your EXCELLENT video. Wish I'd taken 1/10 of the pics you did. Thanks!
@KimSingleton-gi3oq
5 ай бұрын
Great post from you, and Thanks for your compliments re mine.... Of course you may reference it. Meanwhile, Thanks for your innovation w the reflexer. It worked!! Well!! Best, Kim Singleton N729KS; N201TY
@jp-um2fr
2 жыл бұрын
All that work and dedication and just 29 comments - that's KZitem for you. I'm an ancient wrinkly engineer of the old school and what looks right is right and that plane of yours looks perfect.
@Benderisimo
Жыл бұрын
This is KZitem not PowerPoint old man! Stop with the boring slideshow with the move effect and add videos.
@paulogden7417
Жыл бұрын
@@Benderisimo So where is your masterpiece airplane? Oh that’s right, you’re just a troll.
@KimSingleton-gi3oq
5 ай бұрын
Hi JP; Thanks for your kind comments. Yes, building the Q2 was an amazing adventure. (If nothing else, I'm still really good at fiberglass layups!) I got lucky; my Q2 performed well.... Kim
@johndewey7243
Жыл бұрын
Everything about this was perfect!
@waltb4415
Жыл бұрын
This brings back memories; thanks Kim. I built N82QQ in 1981-82 and flew it from Southern Cal to Oshkosh for the 1982 airshow. It wouldn't climb over 6,000 MSL so we barely made it over the continental divide next to Interstate Hwy 10 near Deming, NM. The engine broke in Wichita Falls, TX. With help from local mechanics, we pulled the heads and had a valve job done at the local VW Bug engine shop. Then put it back together and flew NE to Oshkosh. In one rain squall, the airflow over the canard was reduced by raindrops so much that it wouldn't hold altitude. I did a turn out of the rain into dry air so it would keep flying. In Kansas it wouldn't hold altitude due to bugs on the canard so I landed and scraped every bug off the canard. The airfoil on the canard was super sensitive; bugs and rain would reduce lift enough to make it descend even with aft stick. The Piper Cub had a 40 foot wingspan and a 65 horse engine. The Q2 had a 17 foot wingspan and a 65 horse VW-derived engine. It needed either a bigger wing or a bigger engine. Landings were very hot, about 95 Kts with a long rollout. Although taildraggers like to have the tailwheel pasted on the ground with back stick, this wasn't possible because no elevator. Brake application would make it pitch down on the runway, so it took a long time to stop basically by waiting. Because the wheels were at the end of the canard, 17 feet out, any yaw or touchdown on one wheel would make it try to spin around on the runway, at best groundlooping. In flight, the Q2 was unstable in pitch and roll; hands-off flying not possible. The elevons were near the CG, not at the end of an empennage, so it was pitch heavy. I sold N82QQ to the Los Angeles dealer for Quickie while I was at Oshkosh '82. I never wanted to set foot in it ever again. A C-172 was a much better airplane, more responsive, climbed better, took off and landed shorter. That guy crashed it at Corona airport. My buddy who built a Q2 crashed it but survived. The president of Quickie Aircraft, Tom Jewett, crashed his (that made the cover of Popular Science mag) but survived. He crashed his next experimental airplane but didn't survive. Great guy.
@mtkoslowski
Жыл бұрын
-KEN- KIM 👍
@outwiththem
Жыл бұрын
So some mods could make it better. bit longer center wing, smaller lower wing maybe? Looks aerobatic too.
@kpsingleton
Жыл бұрын
Wow; thanks for the stories! "Yes" to 'hands-off flying was not possible' and the fast flat approaches for landing. Still, you took your Q2 into tougher situations than I ever experienced in daytime, dry-air, mid-west flying. Those were the days of being young (immortal?) and frugal. I'm back in certified planes now; a 1977 Mooney J.
@waltb4415
Жыл бұрын
@@kpsingleton You made the wise choice. There are old pilots and bold pilots but no old-bold pilots. Mooneys are outstanding. With homebuilts, there is a divergence between the image and the reality. Like marrying a model/actress, there are steep prices to be paid that aren't apparent before the marriage. At 23 years old, I believed the Q2 PR when it appeared on the cover of my trusted Popular Science magazine. That same aircraft crashed and was destroyed but that fact was never advertised. One of the Quickie partners, Tom Jewett, built another homebuilt which he crashed and died in on July 2, 1982. I was at Mojave airport when that happened. Another buddy of mine, Dan Mortensen, crashed his single-seat canard while racing at Reno. He lived but the plane was in bits. I am proud of anyone who actually built a Q2 (not dreamed about it), flew it, then put it away as they found that reality is divergent from PR. It's the Old Pilot maturity.
@waltb4415
Жыл бұрын
@@outwiththem Some people have put tricycle gear on them, which would help with the yawing moment on landing. The Q1 was a single-seat, 16 horsepower engine, and a 16'8" wingspan. Q2 was a mod on the Q1 but not an upscaling. The Q2 had a 16'8" wingspan (no change) and a 65 horse Revmaster engine. For comparison, a two-seat Cessna 152 has a 105 horse engine and a 33 foot wingspan. Hmm, which one will climb better? Yep, the 152. The Q2 had much less span and wing area and engine than a C-152 so it had to generate more speed to fly. That's why it needs long runways to take off and land. The Q2 also has an exotic laminar airfoil that loses significant lift in rain or when bugs hit it. Sure is pretty to look at, though. I later bought a C-152 with a taildragger Sparrowhawk conversion and a 125 horse engine. It was a much superior plane than my Q2, easier to fly, landed shorter, climbed way better, more cockpit room.
@QuickieBuilderNebraska
10 ай бұрын
Built on one for a couple years. Had to sell because I was getting married and financially I was not able to sustain it. Absolutely loved everything about it. Hand cut all the templates out of aluminum......
@thomasstover6272
Жыл бұрын
Hi, Kim! Tom Stover here…a voice from your past! I clicked on your video not knowing who had made it! Very nice to hear your voice and see the story of your Q2. All the best…
@vwagon5566
Жыл бұрын
I would really appreciate taking to you.
@KimSingleton-gi3oq
5 ай бұрын
Hi Tom; This is a belated reply to your kind comments re the Q2. I'm lucky to have continued flying, now in a J model Mooney. I appreciate all the work that went into getting this plane certified, but there are lots of times I wish it were Experimental, so I could do the mods that would make it a better machine. Oh well; for now will just wish you Safe Landings (and good eclipse viewing about 10 days away!) Kim Singleton
@RulgertGhostalker
Жыл бұрын
i am a big Q2 Fan....i think those are the neatest little airplanes .... i looked, and there is a small company in Minnesota keeping the Q2 kit dream accessible for people.. i would absolutely love one of those planes, but i would go with an HKS 700E engine, and put a large 12V LiFePO4 up front, behind the engine, in attempt to re-trim.
@NeroontheGoon
Жыл бұрын
I helped my uncle build a Vari-Eze, starting in 1978 and completed in 1980. It was truly an amazing aircraft and a tribute to the genius of Burt Rutan. What you could do on 100 hp was fascinating.
@Bimmerguy88
Жыл бұрын
Absolutely fantastic! What a Beautiful plane! Your organization, attention to detail, your drive and perseverance certainly paid off, that is a ONE-of-a-kind INCREDIBLY unique machine!
@KimSingleton-gi3oq
5 ай бұрын
Thanks for your very kind comment. It was a Grand Adventure. Kim
@brettbeekmann9324
Жыл бұрын
As a former aircraft maintainer, I appreciate the stubborn dedication that took so long and I love how she turned out. Gorgeous bird.
@lukasethan6429
Жыл бұрын
Awesome story! I’ve built aircraft since 1999 when I got my 1st aircraft job at 19, for Beech, then Raytheon, and eventually Beechcraft. Later on to Boeing, Spirit Aerosystems, and finished at GE Aviation before changing careers. Thank you for showing this, let’s me remember my past life. I’m building the Quickie myself, as Rutan was an idol of mine with the Starship. Thank you so much.
@kevintyrer45
11 ай бұрын
That's amazing that you worked in these companies. It must be quite an experience building some thing for yourself. 😊 I'd like to build one. & am sitting with plans. They are copies of a plane that plane. But dont have a a licence number or legitimate registration for them. Can a person. Purchase a legitimate registration number?
@pastorrich7436
Жыл бұрын
A GREAT story! Thank you for sharing it. I'm glad you got to build and fly your dream.
@shaneclee5512
Жыл бұрын
Thanks for telling us about your Q200. :) Very fond memories as a kid watching one being built by an absolute craftsman. It was absolute perfection of form and functionality, and won Concourse that year. My Uncle built one during the eighties in Melbourne Australia. I had to laugh at towing it to the airport, he had to do the same thing at 5:00am when there was little traffic. He was stopped by Police, WTF??? Once he explained, he had a free escort for the rest of the trip. Lol. I had some time at the controls when it was finished, my one and only flight, it was sooo cool to fly! However, in the late stages of final, wasn't so fun. I'd been a Pitts passenger a number of times before hand, but this was something else! Going like a bat outta hell, at not a breath less than 80 kts over the fence, with your arse just off the ground, on some tiny wheels with no give, only a bit of flex from the front canard, you had to be 'On it'. We touched down ok, but it wasn't going to stop! I remember thinking, 'I haven't seen this far down the runway before...' This was definitely not an aeroplane for country strips! It was this aspect of the aeroplane that contributed to his fatal accident while flying cross country. The amazing fuel economy and speed of running the O-200, allowed him to travel great distances, and into unexpected weather situations at a very quick rate as well. 160 kts at about 8 GPH in cruise if I remember correctly.... My Uncle was caught with closing weather around him, forced to come lower and lower due to cloud and rain, and ended up circling a paddock for about 45 minutes at a few hundred feet, according to the owner of the property he was above, nestled in the NSW Blue Mountains. He was an instrument rated pilot, however the aircraft was only equiped as VFR, and had no artificial horizon fitted, as it's not a mandatory instrument for VFR operations. A dollar saving that cost him much more... He tried flying the Q200 on 'Limited Panel' under the hood, however it only lasted about a minute before everything 'toppled'. Piecing together what his options were at the time, my Uncle would have looked at the paddock below to assess his chances of a forced landing, which would have been close to zero, knowing the speeds, the distance needed, with a wet soggy soft soil/grass surface. An almost 100% chance of destroying the aircraft. The owner of the property commented, '..after circling for about 45 minutes, he flew straight into the cloud and wasn't seen again.' The offical investigation concluded that the aircraft at the time of impact, had been performing a high G turn at full power, whereupon the left front canard struck a tree, causing the fuselage to split open along it's length, the occupants being thrown clear of the impact zone. My surviving Uncle, part of the rescue party at the crash site after the aircraft had been missing for 3 days, commented, 'The side of the aeroplane had been opened up like a sardine can, it was just peeled open. There really wan't much left of an aeroplane to sit in. They'd been thrown out of the aeroplane at some stage of the crash...' While the Q200 cannot be held responsible for the accident occurring in the first place, it's landing performance may have lead to making a decision to press on, rather than land in a paddock. Looking at the survivability potential of the aircraft after the incident as well, our fears seemed to be realised before the crash, there was absolutely no strength in the structure to sustain any impact from a rough/forced landing. Landing on a wet boggy surface may have had a similar result, of ripping the aeroplane apart. ??? A 'No Win' situation maybe? An awesome aeroplane, way ahead of it's time! That was Burt Rutan :) VH-OIO RIP
@qwertyplm13does51
Жыл бұрын
Thank you.
@vrsoundscapes
Жыл бұрын
Nice story and a well-done plane. I built an RV6A in the 90s, but before that in the 80s I got a ride in the original Q2 from Dick Sheehan in Mojave. An amazing plane - with a few quirks. Thanks for the memories.
@chrisbilly6203
Жыл бұрын
Badass man. Thanks for the video and breakdown of the journey 🫡👌
@SilvaAdventures
Жыл бұрын
Thanks for putting this together. You built a heck of an airplane…what a personal achievement! I love these planes. Blue Skies!
@jannsander
Жыл бұрын
What an awesome project and may I say, your documentation is wonderful!Everything about this video seems so soft and nostalgic but so exciting and inspiring at the same time.
@outwiththem
Жыл бұрын
Mechanics built our progress. You are a great one.
@SKYGUY1
Жыл бұрын
Really enjoyed this "record" of construction Kim. Thanks for producing it for us. A friend and I were considering buying a finished Q2 in the late 80s. We had the owner fly to our location and he took us up in it. It was kick in the pants but we couldn't reach a satisfactory deal for both ends of the deal. We did pay his expenses both ways as we had agreed to do. I really enjoyed the feel of the plane. I was a relatively new pilot at the time w/ maybe 300 to 400 hrs so it was really exciting. I finished my career three months ago (May of 23) w/ 40 years as a pilot and 22 as a Flight Instructor and about 3,400 hours. I've flown a TravelAir, a Stearman (through aileron rolls), an AT-6 (also through rolls), a Diamond DA-20, Remos Light Sport and I have .8 hr Goodyear blimp time and 2.5 hrs of Rotor time. The Q2 was as exciting to fly as any of those listed.
@ryanchurch5864
Жыл бұрын
This is a huge inspiration and an amazing story- and what a beautiful final result!!
@manjunathayr9348
Жыл бұрын
It was a pleasure watching your story. I can imagine your first flight with so much of an odds of mind, at least until you are flying in the air. You seem to be very brave, your belief in engineering is marvelous and you did it; I wholeheartedly admire your efforts to construct this great build, now i am building one for myself too. Thanks for the video.
@wes4v
2 жыл бұрын
Fantastic, accurate, and way understated! It shows the dedication, work, and confidence required to build and fly this aviation jewel (and hints at many of the struggles). Not mentioned was how difficult it was to complete the project in these early days just when the kits were released. The builders' community had not fully formed, and many of the engineering quirks of the Q's had not been identified, no less addressed. Some people died in this ignorance, and everyone got a good scare at one time or another. Today the problem is reversed: now there are few experts active, and liability concerns dampen the desire to share solutions, so much of the art of building and flying these is fading away.
@wilsonandremachadosilveira4200
6 ай бұрын
Beautiful airplane!
@AerialWaviator
Жыл бұрын
As a teen in the 1980's I followed stories of the Q2 and other Rutan designs. Q2/Q200 was a favourite. Thanks for sharing your story.
@nealfulco9399
9 ай бұрын
The Q2 was not a Rutan design. Rutan however did design the single seat Quickie. I built and flew one and it was a a really fun airplane.
@AerialWaviator
9 ай бұрын
@@nealfulco9399 Thanks, had not realized. I'd just assumed was a Rutan design too, as Quickie Aircraft Corp was based in Mojave. Reading Garry LeGare designed the Q2 in Canada.
@someotherdude
3 жыл бұрын
Thank You for sharing this! Wow what an undertaking.... I know my way around a workshop and I can see the fit n finish. What an inspiration!
@1212CRMD
Жыл бұрын
Nice looking aircraft! I wish to learn more about it. Its flying characteristics and so on. Thank you for sharing w us!
@mikedrop4421
Жыл бұрын
That's amazing. So cool to see innovative designs like this. Thanks for sharing
@lynskyrd
2 жыл бұрын
Awesome job. A friend of mine just finished a Cozy 3 after 7 years... now I'm getting 'the itch' :) Fly safe.
@andrewwolf4430
2 жыл бұрын
Kim, in 1987, you took me up for a ride, what a beautiful aircraft. Andrew Wolf
@KimSingleton-gi3oq
5 ай бұрын
Hi Andrew; Wow, it has been a Long Time. So glad you had a chance to experience the Q2, and that we could share it. Hope life continues to treat you well! Kim
@jdawson016
Жыл бұрын
Neat work! Thank you for sharing this with the world!
@miketierney7510
Жыл бұрын
Interesting idea. Two wings with different angles of attack so it won't stall.
@bradboardwell8295
2 жыл бұрын
Thanks for polishing up the old video footage and making this video. You did a great job!!! I will someday build or buy a Q2... thanks for keeping my dreams alive!!
@bobsyeruncle4841
Жыл бұрын
superb all round
@pilotavery
Жыл бұрын
It's amazing..
@codac493
2 жыл бұрын
Awesome undertaking. I recently acquired a Q-kit. I'm getting ready to match the shells and buy a couple billets of foam for new flight controls and wings. I also have to stabilize and repair the carbon spars.
@marc-bernardlevesque5016
Жыл бұрын
If you can get any information or measurements regarding the carbon spars please share this information. I don’t think anybody has access to spare to share this information.
@crystalclearwindowcleaning3458
3 жыл бұрын
I've dreamed for years of building a Q2. Thanks for sharing your experience.
@johntenhave1
Жыл бұрын
Excellent photography.
@landlocked4771
3 жыл бұрын
Nice job, its beautiful.
@stejer211
Жыл бұрын
Great show and tell, thanks!
@ponip1
Жыл бұрын
Greate idea!!
@turboed00SI
Жыл бұрын
This is awesome...congrats to you in building your dream in your garage!
@docrw
10 ай бұрын
Nice video Ken! From David H Q200
@igorarbichev2951
Жыл бұрын
Очень необычный и элегантный самолет. Браво!
@CuzznRickH14
2 жыл бұрын
Enjoyed the video as it was well done. And the airplane looks to be an exceptional piece. It must be pure joy to fly. Thanks for sharing.
@williamgray1056
Жыл бұрын
Great job and dedication sir.
@ColeAviation
2 жыл бұрын
AMAZING airplane!!! A friend of mine is in the process of getting his flying. 😁 You did a fantastic job narrating this video.
@kpsingleton
2 жыл бұрын
Glad you enjoyed it
@BFerris77
Жыл бұрын
i saw one at oshkosh this year! got me very interested in them
@marshmellomatey
2 жыл бұрын
Love it, even if the prop breaks you can still land it!
@keithfreeman5204
2 жыл бұрын
Since about 1963 I have been flying Model Airplanes. First C/L then in '76 got my first Radio, been flying R/C ever since. I Design, Build, and Fly. I learned a lot from watching your Build. Many of the same building style you used I use in building my planes. My planes are powered with 2 cycle Engines. Running the engines is just part of what I like. Most have full 3 axis control. Couple are Yank and Bank, 2 channel ,ail & elv. What engines could be used? Horsepower requirements? Prop sizes, dia & pitch? This airplane has a rep of being able to really go fast while sipping fuel. Thank You for a well done video You going to continue with more on this "Quickie".
@tinolino58
Жыл бұрын
Love it, love the video! But the landing speed is out of this world!
@PiInTheSky
2 жыл бұрын
Great video, thank you for sharing the journey!
@QuickieBuilderNebraska
10 ай бұрын
Btw.....incredible video!
@perfectscotty
Жыл бұрын
Great aircraft, Thanks for the video.
@edilbertosantana8307
2 жыл бұрын
Beautiful !!!
@AClark-gs5gl
2 жыл бұрын
I would really like to do with the Q-200, what Velocity did with the LongEz platform. Amazing video/build, btw!
@iamthefatstig
Жыл бұрын
Very interesting. I have one in Microsoft flight simulator 2020 and its a great plane to try and master. Seeing the build process was very insightful.
@jamesdoerr4318
Жыл бұрын
Thanks for sharing.
@brianwhippen7497
2 жыл бұрын
That thing is beautiful
@Boatin
Жыл бұрын
Well Done !
@Kiromos
2 жыл бұрын
Thanks so much for sharing
@charly0469
2 жыл бұрын
such an amazing work,bravo! thank you! maybe someone will build a scale rc q2 now!
@samuelrasnake227
Жыл бұрын
ditch the ICE...go all electric...embrace perfection
@carlott13
Жыл бұрын
First plane I ever flew in was a Q2, now I’m a cfi cfii!
@gordonyork6638
2 жыл бұрын
Um..... There is no April 31st. Anyways, I love Rattan's designs. I especially like this one.
@gulfair-cavalry-tango1011
2 жыл бұрын
BEAUTIFUL!!!! BEAUTIFUL!!!! BEAUTIFUL!!!!
@FelixSamulevich
Жыл бұрын
If wings can be fixed on the body by hinges and under it supported by suspension and amortization springs system .it can simplify the adjustment and prevent cracking which can lead to extreme situation . and more comfortable in landing time . But i like this system first it was planed and constructed by some Russian student as diploma work .Form was different more slender .
@TheBrohamExpress
2 жыл бұрын
to cool.
@arosnett
Жыл бұрын
Love it!❤
@donwright3427
Жыл бұрын
That's dedication folks
@michaelshan7141
2 жыл бұрын
Wonderful
@buzzbbird
Жыл бұрын
Nic vido. May I mak a suggestion? Background sound, including music must remain in the background.
@bartofilms
Жыл бұрын
Sweet! How many PPT hours did you have before flying this beauty? Was the 1st flight challenging w. Respect to trim, appr speeds? Cheers.
@goodisnipr
Жыл бұрын
It makes more sense to have the landing gear supporting the wings, because fuel is heavy. When landing gear supports the fuselage, the wings are flexed downwards by the fuel, and when you transition to flight, the wings are flexed upwards to hold the fuselage. When landing gear supports the wings, the wings are always flexed upwards at the root and therefore undergo less stress leading to metal fatigue. (I know, the aircraft in the video is carbon fiber. I'm speaking generally.)
@PC-vq5ud
Жыл бұрын
Fiberglass and resin
@goodisnipr
Жыл бұрын
@@PC-vq5ud yeah, that stuff. thanks for the correction
@anthonyrutherford758
Жыл бұрын
Great video,well done ! The loud music spoiled the video
@texel2000
Жыл бұрын
Beautiful aircraft, amazing lines. Job well done. Just curious, does anyone know what the maximum speed, cruising speed, and stall speeds are? I see that it was a 100 mph landing, probably due to smaller wing surface issues.
@alainremi267
7 ай бұрын
Great! I remember reading in early 80' the story of a gentleman, living in central USA, who built a Quickie Q2 to visit his sons on the west coast. I don't remember which magasine it was... Maybe Kitplanes, if anybody remember these two articles please let me know. Thanks
@Chyeahokay
Жыл бұрын
This things looks amazing! How does it fly?
@NickWindham
2 жыл бұрын
Awesome
@amgguy4319
Жыл бұрын
It's great looking, but you didn't tell us how it flys, how it compares to other aircraft.
@Xayuap
Жыл бұрын
¿do you really need the vertical?
@canerguener8664
Жыл бұрын
Any disadvantages of this design
@m118lr
Жыл бұрын
SO…WHAT became of it? Is it an absolute hit on the market? Reliable, fast..EASY to fly..?
@kevintyrer45
11 ай бұрын
Can a person still get plans or kits to build this craft?
@robertphillips3078
2 жыл бұрын
Burt Rutan certainly was way ahead of the 👏👏👏⏰⏰'s Love ur Q2 story. Fabulous 1st aircraft. Gr8 👀👀 flybird. . Q's 4U. Can u still purchase the planes 4 this aircraft for the 200hp engine. If so would u mind steering me in the right direction. Thx 4 sharing.
@scheusselmensch5713
2 жыл бұрын
The most powerful engine that was installed in the two place Quickies was the Continental O200 (200 cubic inches) of 100 horsepower.
@marcolattimore8101
Жыл бұрын
I can't hear what the narration says when the second canard plane is purchased. What type of plane is added to the fleet?
@kkiwi54
Жыл бұрын
Would be easier to watch without the intrusive music
@felixaudet5860
2 жыл бұрын
Seems like that thing would be a good candidate for electric conversion: super low drag and efficient.. Would it handle the extra weight of a battery, with some reinforcements?
@dmisner100
2 жыл бұрын
Please give me your overall view, pros and cons, etc. of the Revmaster engine. I am going to be using a 2300 on my Sonex and always like to hear from the experience of high-hour users. Thanks.
@Sorarse
2 жыл бұрын
8:10 April 31st? Must have been a double leap year.
@tazkrebbeks3391
2 жыл бұрын
My uncle, who was an avid flyer, once told me. Any Landing you can walk away from is a good landing.
@jonathanprince2667
2 жыл бұрын
Thanks for sharing, where can I obtain accurate building plans?
@zachansen8293
Жыл бұрын
why is your voice only left channel?
@igo-r
2 жыл бұрын
👌
@worldtraveler930
Жыл бұрын
Unfortunately you're background music Almost Completely and Totally washed out your narration!!! 🤠👍
@FlyMeAirplane
3 жыл бұрын
Well done video on the construction! How come N729KS is deregistered now?
@kpsingleton
3 жыл бұрын
Hi, FlyMeAirplane.... I gave the airplane to a aviation buddy, but deregistered for legal/liability reasons. I don't want even a glimmer of "manufacturer liability" if a subsequent pilot has an issue....
@FlyMeAirplane
3 жыл бұрын
@@kpsingleton Good idea!
@justiniida176
2 жыл бұрын
Very nice video! I am glad I stumbled across it. I have N729ks tucked away in a hangar in Indiana.
@visekual6248
2 жыл бұрын
I have heard that this is a difficult plane to land
@waltb4415
Жыл бұрын
Very difficult, because you must touch down absolutely straight with both wheels simultaneously. The wheels are so far away from the CG that significant yaw and groundlooping is a risk. Single-engine airplanes must have a stall speed of no higher than 54 knots to be certificated. Not so for experimental class. The Q2 generally approached at 95 knots and wouldn't fly at less than 80 knots. This made for hot landings with long rollouts because there's no elevator to paste the tailwheel down while applying brake. So little braking was possible until taxiing. A Pitts is easier to fly and land than a Q2. So I always picked long runways pointed straight into the wind. Crosswind landings were not feasible. I have an ATP with DC-3 type rating, CFI, CFII, tailwheel, sailplane, and seaplane ratings and 3,000 hours. This was the most terrifying plane I ever flew. After selling it, I bought a C-152 Sparrowhawk tailtragger conversion, which was a much better plane. Not nearly as cute-looking but everyone I knew who built a Q2 like me crashed it. Some survived.
@nealfulco9399
9 ай бұрын
Can’t speak for the Q2, but I built and flew the single seat Quickie. It was a very stable and easy to fly aircraft….and super FUN. I had no tail wheel experience so got checked out in a Cub. Then flew the Quickie. The Quickie was not difficult to land. In fact landings got to be the most fun part of flying it. I wouldn’t even try to land a Pitts. Mine landed around 60 mph because of the lack of flaps so it was a little fast on touchdown. The plane was very stable with harmonized controls.
@Sapphiresoul2
Жыл бұрын
my right ear is lonely
@richtrost2676
2 жыл бұрын
Sorry but the music almost overruns your voice. I was interested in your project but had to bail out. Sorry!
@kpsingleton
2 жыл бұрын
Hello Rich; Sorry that my voice/music mix didn't work for you. I did my best but when it comes to videos, I'm a beginner. Hope you find an aviation project that captures you as the Q2 did me. Best wishes, Kim Singleton
Пікірлер: 159