Great Job! I’m waiting on 2 FX3 for our cooking show. This episode was an excellent one. Helped me lots on what I need for my upcoming Culinary Documentary. Thank you very much. Aloha🤙🏾
@MichelangeloBaffoni
2 ай бұрын
connecting both monitor and camera to the same v-lock there is the risk of a short circuit, it has already happened to me on two cameras, I burned two HDMIs, I don't understand why all the KZitemrs continue to assemble rigs in this way without warning of the possible risks.
That is one beast of a rig!!! Very tastelful, clean, functional rig.
@jaredlank
2 жыл бұрын
Thank you! I appreciate it 🙌🏼
@SteezyKane
2 жыл бұрын
7k?? Bro you need an fx6
@justinchow13
2 жыл бұрын
Hey Jared! Thank you so much for this amazing video! Just a quick question in terms of the Matte Box, how quick are you able to do a lens change? I was thinking of mostly using the 35mm and 50mm gmaster and was wondering if it was as easy as being able to swap the lens and just shift the Matte Box back and fourth on the rails or was there any further adjustments required?
@rodrigomacias
2 жыл бұрын
Well, I finally got my FX3, now I just need $2500 more dollars to buy the rest
@shyaboutmyart6254
2 жыл бұрын
your rig was 6k and mine is 11k , I don't see much of a difference from mine and yours
@rezjrprod
Жыл бұрын
Dig the hat. Great video
@noahburt2722
2 жыл бұрын
I just found your channel and noticed you haven’t uploaded in a while. I love the look and feel of your videos and hope you get back on the KZitem train. Your filming is beautiful and sparks my own creativity which I’m super grateful for. Hope whatever you’re doing, you’re enjoying it. Going to search for your other socials for some more content!
@DrewProject
2 жыл бұрын
Awesome video man. Id love to see this compared to the fx6, what it can and can’t do. Gotta say i was surprised to see that you’re a small/new channel, your video quality is so good i thought you were anothe one of those 2-300k subs channel! I’m sure you’ll get there quickly with this quality of video! Right on and hoping to see that comparison soon.
@jaredlank
2 жыл бұрын
Thank you so much! I really appreciate that, I had a lot of fun making this and I’m looking forward to sharing mor this year!
@PerfectGuyLife
Жыл бұрын
Nice hat
@Samiam-mu5ln
2 жыл бұрын
Might be a pet peeve of mine but more B roll would have been nice as each piece was being added to the main one. You had a lot of jump cuts and an easy fix for that is put some b roll in-between those cuts and it makes it a lot more smoother! Other than that, great video! Love seeing people build custom rigs!
@jaredlank
2 жыл бұрын
Thank you! I appreciate the feedback! For the next review I’ll try to incorporate more broll of the build so there’s a better view. I’ll probably try using an actual script too. A lot of the jump are in there simply because of my lack of experience talking to the camera so I cut out a lot of uhs and ums lol
@fullbars
2 жыл бұрын
Great video. Very useful
@progun1corn
2 жыл бұрын
That looks so good, the part of the Vmount and screen, my FX3 rig is also inspired by DSLR shooter. Love that handheld look from a rig like this, always give me great results
@jaredlank
2 жыл бұрын
Thank you! It’s super functional too, being able to see all the camera settings quickly has been super useful for me, I always hated having to peak behind the Vmount!
@danjdickman
Жыл бұрын
How do you change batteries mid shoot! Do you have a 2nd plate?
@progun1corn
Жыл бұрын
@@danjdickman there's nothing prevent me from doing this, the rig can freely open battery door. Actually there's no need to change frequently because V mount id too good.
@danjdickman
Жыл бұрын
@@progun1corn I meant change the V-mount battery not the internal Sony battery! Since the release mechanism of the Vmount plate is removed.
@progun1corn
Жыл бұрын
@@danjdickman oh, I didn't remove it since my rig fits. It's a matter of how high your rig is, I use Nitze's V mount and Smallrig baseplate, it just fit right very tightly. If there's a higher V mount plate then it's gonna be easier
@mezzanineh15
2 жыл бұрын
Super vid! Just a quick note, you can easily take off the stoppers on the mini FF. If you dismantle it, take them out. It’s quite a simple design and easy to reassemble. Another cool option would be to have an upgrade version with the Tilta side follow focus handle with nucleus N set up. Subscribed ! 💪🏻
@MichaelKefeder
2 жыл бұрын
Amazing break down, thanks! And I like you mentioned that the price and weight end up being like a FX6 once your FX-3 rig reached feature parity. I also noticed that when looking to buy FX3 or FX6 and I did my comparisons. Probably will go with the FX6 now that it has firmware v2.0, the advantages of FX3 are no longer there. Except the small size, doing public shooting without getting bothered will be hard with the big one ;)
@jaredlank
2 жыл бұрын
That’s awesome! I’m considering pick up an FX6 this year and running it as my primary and using this as my secondary because of the update and built in NDs. Hope you enjoy the FX6!
@devlevy
2 жыл бұрын
this setup is a dream!! what tripod are you using for your a-cam set up? also if i have the PM VND 2-5stop mist, what matte box might you recommend instead?
@jaredlank
2 жыл бұрын
Thanks! This is the Manfrotto 504HD head and 535 carbon fiber tripod. Also, you can use the circular PM VND on the Tilta Mirage, they can mount right to the front threads inside the matte box. Hope that helps!
@devlevy
2 жыл бұрын
@@jaredlank it does! Thanks so much
@rcruz262
2 жыл бұрын
The link you have is for a full cage. Do you have a link for the cage you have on the video?
@heyhey5963
Жыл бұрын
Hi Jared, have you had any issues with the WD 1TB SSD for the Ninja V? Atomos' site lists it only supported under ProRes RAW, not ProRes RAW HQ nor 2k 240p as well. I'm about to purchase everything so any insight would be very helpful!
@BluprintStudios23
2 жыл бұрын
Love this! Thank you for the breakdown! Just picked up the FX3 and want to start building it out…this was extremely helpful.
@jaredlank
2 жыл бұрын
Sick! Have fun building it out and using it, it’s an awesome camera!
@multitaskmedia3636
2 жыл бұрын
did you have any problems with Rode microports with FX3?
@jaredlank
2 жыл бұрын
No issues so far!
@jeffelstone
Жыл бұрын
So I also removed the release lever on the V mount plate so that the camera's screen can tuck against the side of the battery nicely, but here's my question - How do you get the V mount battery off the plate without the release lever??
@palojusrinivascharypssppp1603
Жыл бұрын
🙏🌹🇮🇳 PSSPPP 🇮🇳 PALOJU JAI SRIRAM 🇮🇳🌹🙏
@FabianBrucker
Жыл бұрын
How much does you setup weigh? Did you messure that maybe? Feeling I need to rethink my A7siii Rig because I really need a EasyRig for mine and I want a more versatile Run&Gun Setup. Thanks in advance!
@lockehollandknight
2 жыл бұрын
What would you recommend to do if I wanted to be able to use this rig set up but also be able to quickly put the camera on a gimbal without having to take everything apart?
@jaredlank
2 жыл бұрын
I think that this setup would mount to the ronin rs2 and you could just take the monitor off to mount onto the gimbal handle. You could also just quick release the fx3 from the rig and mount it to a gimbal! It takes ~45 seconds to take the camera off of the base plate system. Hope that helps!
@Danieljoforiatta
2 жыл бұрын
This video is perfect! Best FX3 rig I’ve seen with all the links and prices, and the production quality itself is amazing, especially the studio shots of the rig🔥 looking forward to your future content!
@jaredlank
2 жыл бұрын
Thank you! I’m really glad you enjoyed it, and that listing everything was helpful!
@MandoOutdoors
Жыл бұрын
Question, are you able to use the XLR and wireless mic inputs at the same time?
@diegopaleta94
2 жыл бұрын
I've been here the hole time wondering about if that tilted camera setup in the back near your Mac is for film scanning. Is it? It'd be awesome to see a small break down if posible. So many doubts on this one. SUPER NICE video btw. It just made me want a FX3 even more of what I did hahaha. Keep on! 😁
@jaredlank
2 жыл бұрын
Haha yeah it’s a film scanning rig! It’s the basic kit from Negative supply, I have the 35mm and 120mm carriers so I can scan both types of negatives
@BIZFILMZ
Жыл бұрын
Quick question for the small rig v mount battery plate what screwdriver do you use to remove the red lever. Trying to do the same thing with having my camera screen flip out but the red lever is blocking it. Thanks!
@GoodBloodGames
2 жыл бұрын
This is a beautiful breakdown. Thanks for all the detail!
@filmsbytrav_
2 жыл бұрын
Love this rig! Thanks for sharing 🤙🏻 Do you find the 35mm is all you need in a doc style shoot? My go-to is the 24-105 for it's versatility but obviously zooms wouldn't work with a setup like this (matte box etc).
@jaredlank
2 жыл бұрын
Thanks! When I need a zoom that is telescopic I typically swap out the Tilta mirage matte box for a circular VND and run it that way! This setup takes no time to swap out lenses though so it’s never held me up. I usually try to stick to primes for handheld doc stuff just because I prefer the look over zooms, but the zoom I use the most is the Canon 70-200 2.8 mkiii and that lens is fully contained so there is no telescoping and can be used with a fixed setup like this. Hope that’s helpful!
@filmsbytrav_
2 жыл бұрын
@@jaredlank Great to hear with this setup you’re still able to quickly swap out lenses, that was the main question in my mind. Cheers mate!
@bentonpix
2 жыл бұрын
Great full featured rig! But it should be pointed out that while having filter threads on the Mirage lens adapters is great, if you have a filter on it (like a Pro-Mist) you won't be able to use the main 95mm filter slot on the matte box. You can add a second stage 95mm filter tray, one for the VND and one for a Mist or other filter, but then you're limited to a maximum wide lens of about 35mm because of vignetting the additional tray causes. If you want the combo of the Tilta VND + Mist + wider than 35mm, you'll have to put the mist filter directly on the lens before the matte box adapter or use a 4x5.65 Mist filter $$$ in the front of the matte box. Alternatively, and ultimately the best way (but slower) is to use the Vaxis fixed value ND filters (superior to the VND) combined with a mist filter in the Tilta Dual 95mm filter holder in the main slot.
@jaredlank
2 жыл бұрын
Solid points! I have run into that issue and used a couple of the solutions you mentioned, I also really prefer the fixed NDs to a VND. Slightly more annoying to get in place but the color / image is significantly better, thanks for pointing that out!
@vahidamini1863
Жыл бұрын
Thanks! That was very HELPFULL...✌
@GooniesVideos
2 жыл бұрын
What was the tripod you used in your intro? Can you throw up the link to buy. Great video ty.
@sahandnayebaziz
Жыл бұрын
Thank you for this amazing video. This gave me so much clarity and finally helped me figure out what all these pieces are and what they are supposed to do. This was super valuable to me.
@easyshavemediasolutions
2 жыл бұрын
Great rig mate. Do you have any issue when you are recording sound using ECM-MX1 because Atomos Ninja fan is pretty loud? How you fixed that ?
@jaredlank
2 жыл бұрын
Thanks! I haven’t had any issues with fan noise issues from the Ninja with the ECM mic. Also, I think the latest firmware update allows fan control for the Ninja, so if there was a notable issue you could reduce the fan speed. Hope that helps!
@easyshavemediasolutions
2 жыл бұрын
@@jaredlank yes, we updated firmware.. but we didn't shoot anything yet with this setup.. So we just wanna double-check with you cause u have more experience. And to be honest, we thought no one will use that ECM mic... it's super old model but still outstanding :) Good choice to save some money!
@mattliller
Жыл бұрын
I wish I had a nickel for every FX3 rig build vid I’ve watched, and this is by far my favorite. I’ll definitely be copying most of these components!
@KrishnenduKes
3 ай бұрын
Did you copy?
@HighGravityAdventures
Жыл бұрын
so would this same setup work with the 24-70 GM or does the matte box/rail mount only work with primes?
@sixofsix
Ай бұрын
Sony dedicates millions of $ in R&D to craft a nice compact camera, just for us to spend an addition $2000 to build them out to a larger form factor of an FX6 without XLRs, Built-in VNDs, or button layout :( FX3 Rig: $5400 FX6: $4800 (used market)
@livodeadrock
2 жыл бұрын
Amazing rig setup. Best I’ve seen! Do you ever use zoom lenses for your documentary run and gun shooting? If so how do you get around the matte box/VND issue? It’s the only thing that’s making me question this over the fx6 (if they ever come back in stock again!)
@Jurgensfilm
2 жыл бұрын
Thanks for this breakdown video of your rig. I'm currently building an FX3 rig myself and this is a very similar setup to what I'm going for.
@jaredlank
2 жыл бұрын
Awesome! Glad it was helpful 🙌
@thegenerousthief
Жыл бұрын
DOPE Set up !! Easily the best looking rig I've seen with the fx3. Are you still happy with the mic or would you upgrade to a Sean make 600 etc ?? Cheers,
@bryancook5203
7 ай бұрын
Hey so I got the tilta vmount plate but I cant get the screws come off what did you do to get that working?
@creativeclubstudio5311
2 жыл бұрын
Hi Mr.Jaredlank .... Really i am too impress this rig setup..... I like your Presentation with price list also.... But i am sorry to say why this shoot from backlight....
@therexallen
Жыл бұрын
Haha! Yep. I totally bricked my A7SIII with a Kondor Blue dummy battery! Live and learn. 🤣
@KarenFoote
8 ай бұрын
Hi Jared, very cool video. I know you've moved on from this rig but you mentioned you removed the Tilta amount plate latch and got the idea from Caleb. In the video you link to, I don't see him using the Title plate nor how to remove the latch. How did you remove the latch on the Tilta? Is it just a matter of removing the 3 screws holding the v mount? If so, can you give a link to your screwdriver cause dang they're pretty stubborn for me. Thanks!
@comcam.
2 жыл бұрын
So detailed and informative! Thank you so much for making this, I may try to build mine out like yours😃 That must’ve taken a lot of time and money to figure out the perfect set up like that
@jaredlank
2 жыл бұрын
Thank you! I’m glad it was helpful!
@Humanitypictures
2 жыл бұрын
I really enjoyed this breakdown! Lots of great information! I'm considering getting this camera and your video was extremely helpful!
@jaredlank
2 жыл бұрын
Thanks David! Glad you enjoyed it and found it helpful!
@omkt.v.1933
2 жыл бұрын
Appreciate the vid, needed this info. Beautiful setup! Just became your 777th sub. Random question...are you Native American?
@jaredlank
2 жыл бұрын
Glad you enjoyed! And yes I’m Mi’kmaq!
@ShubiCreations
2 жыл бұрын
Which lens do you used for close shots of camera intro
@flowjoew
2 жыл бұрын
Nice rig, great Video! Can you still acces the buttons on the camera when the battery is that close to the body?
@jaredlank
2 жыл бұрын
Thanks! And yes I’ve had no issue accessing buttons on the back of the camera👍🏼
@adrianmack7750
2 жыл бұрын
Hey Jared, dope video man!!!! I’m revising my rig based on yours. My only question is how did you remove the handle on the V-mount plate? I have a small rig version and I’m not sure if i need to have the tilta model to make it work. Thanks for the awesome vid.
@myaudiocash
2 жыл бұрын
thanks for the wonderful video but i have a question...its it SAFE to connect all your devices on one D-TAP splitter.. my V-mount battery has just one D-TAP slot and i got a splitter to be able to connect other devices .. please advice me
@jaredlank
2 жыл бұрын
Hey! I’m not super familiar with splitters, but I would assume it’s safe since there are some many powered v mount plates on the market. Hope that helps!
@DylAlitY
2 жыл бұрын
Most educational video about rigs I've ever seen. Thank you. Will make this rig.
@edi18912
11 ай бұрын
HI I currently shoot with an older Xt3 and im looking to upgrade. Im trying to decide between 2 full frame cameras. The new Lumix s5iix or the older Sony A7siii. My use case is video only and im currently focused on realestate videos and some weddings, client work ect. My main concern is for filming real estate in 4k60. What would look better a7siii 4k60 or the lumix s5ii 4k60 cropped? Most high end videographers in the real estate industry use a7siii. Taking everything into account, noise, low light, Dynamic range, image quality ect which is better. My goal to get the best quality 4k 60 video. Thank you
@darkknightwithanidea1845
2 жыл бұрын
Had thought about an FX3 system but then DJI gave us the Ronin 4D - I’d NEVER look back … having CAMS & doing buildouts is just too expensive & a total headache. Get a RONIN 4D & have a complete package that does it all on a pro cine level.
@GuruReviews2015
2 жыл бұрын
You made a comment that Caleb showed you a trick on removing the lever on the V mount plate. Could you explain please? Most the few plates I have tried it, does get in the way of the screen. I have the Blue Kondor now, You can "under sling" it by reversing the plate. It puts it on the right side vs left, but of course moves all the ports around as well. Great Video and rig :)
@jaredlank
2 жыл бұрын
Hey! Sorry for the late response, I have the Tilta micro V plate and the actual V mount on the plate is removable, so I removed the mount, took the push lever out and reattached the mount. Hope that helps!
@GuruReviews2015
2 жыл бұрын
@@jaredlank Thanks for the reply. I was thinking about that, but doesn't that also remove the lock on the mount? So it's on the plate but "could" get bumped hard enough to come loose?
@一萬的仙境傳説
Жыл бұрын
This is an impressive rig, but IMHO it's an overkill and unnecessary. If someone needs all these whistles and bells, he can just go for the fx6. BTW, nothing else comes even close to the electronic ND of fx6. The fx3 is designed to be portable like a mirrorless camera, to be handheld like a mirrorless camera, to be easily mounted on a gimbal or on vehicles, etc. If your fx3 rig weighs over 4lb, or is too big to fit in, let's say, a ronnie rs3, then my advice is: step back and rethink about your use case. A camera, essentially, is a tool to take pictures in a way how YOU see the world. It's not a jewelry or some symbol, it's not meant for impressing others or showing off a "professional" look. The best camera is the camera you can always bring with you in any situation. A-N-Y-S-I-T-U-A-T-I-O-N. Everyone is encouraged to explore their own shooting styles and find the setup that works best for them. but it's just sad to see folks spending too much time buying and rigging up the cameras, thinking that the next gadget is all they need to make them a better filmmaker. This is not professionalism, it's consumerism.
@daikishinomiya
2 жыл бұрын
Love the intro titles!
@jaredlank
2 жыл бұрын
Thank you!
@tomnoza4576
Жыл бұрын
Hello Jared! I just ordered WD 1TB SSD as you are using it. Which adapter are you using for computer? Are you have Atomos official docking station or if you using different brand would you recommend?
@williamhuang5329
2 жыл бұрын
Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience ,
@WhoIsJonHarris
Жыл бұрын
A thorough video my friend. The FX3 is my next endeavor for sure. Subbed.
@bettadenu7
10 ай бұрын
Hey bro I’m going to do a gym shoot and need to mic up the coach while filming people train etc Is the wireless go 2 good for that ? And also what is the purpose of the lav ?
@human_support
Жыл бұрын
Hello. I bought a VI mount for a Small Rig battery. And the battery latch prevents the screen from being tilted to the side! (((You just sawed it off on Tilt? Or is there some kind of plug?
@butchahbeatz
Жыл бұрын
Hi Jared, I just found your video. Thx for sharing such a great fx3 build. I was wondering if you could share your source about the Tilta v-mount hack? Thx and best regards, Rodian
@mobenefits8296
2 жыл бұрын
What’s your setup with a gimbal? I have ronin RS2 and used your hand held setup, but really would like to see what you do with gimbal.
@jaredlank
2 жыл бұрын
The gimbal I have right now can’t handle the full build payload so I use the quick release base plate to pull the fx3 off the rail system. It actually super fast but I think that when I eventually upgrade to the RS2 the whole rig will fit on the gimbal!
@GeraldBertramPhotography
2 жыл бұрын
Fantastic looking rig! I'm on the fence right now about picking up the Sony mic to complete my FX3 rig. Finding mics that fit well in that shock mount, even with the rubber spacers, has been tricky.
@jaredlank
2 жыл бұрын
Yeah I definitely feel that! You could always try converting the handle into just the KCM module and running a separate shotgun mount into it. Sounds like a hassle but could be useful!
@BusStopBourbon
2 жыл бұрын
Killer rig but nothing is "worth" lacking internal ND. 🤓
@starsoicy108
Жыл бұрын
4k 60p works great with you kondor blue hdmi cable?
@gillesmatheronpro
Жыл бұрын
Hugely appreciated ! Thank you for this superb tutorial, for we rarely such a quality content around... bravo.
@therrera117
2 жыл бұрын
"bLuE kOnDoRe"
@leomatis_
10 ай бұрын
13:00 Can you link or maybe the title of the video that shows the hack? Cannot find the video. Thanks!
@kcaz94
3 ай бұрын
Amazing guide, subscribed! I wanna ask, how would you use the for shoulder rig shots? Do you attach an eyepiece?
@RobertsonDCCD
4 ай бұрын
Enjoyed it 2 years later, still very relevant. If you’re still answering questions, here is mine: what makes you trust the hot shoe mount with all of this weight when there are so many stories of failure at this mount leading to rigs crashing to concrete? I have been trying to figure out how to start an A7iv rig with a full cage, top handle, monitor, and mic, but the mic is the problem. There are some great Sony mics for the hot shoe, but they all seem to be severely compromised as soon as you mount a cage/top handle setup. Your mic setup here, connected with a 3.5mm jack, seems to be the best solution?
@creatrnick2982
Жыл бұрын
bro how’d you remove the metal latch thing sticking out of battery mount plate?
@shotbyarian
Жыл бұрын
starting out at the moment and a few things i don't get: 1.) why would i want to record externally? why not just get a monitor and record internally? 2.) does the fan of the ninja v not interfer with the microphone right next to it? 3.) i don't understand why i would need rods on my camera rig? what are they for? for my RS3 gimbal they would be too big anyways?
@sinaasgari4516
Жыл бұрын
Don’t see your link for the Blue Kondor USBC cable. How many inches is the cable in this video?
@nqxba
2 жыл бұрын
amazing videos, and this rig build is probably the most comprehensive in the web. i’ve got a question though, do you sell a titles pack, did you buy one somewhere or do you make your titles manually?
@jaredlank
2 жыл бұрын
Thank you! I really appreciate that it means a lot 🙌🏼 I got this title pack from Tropic Colour! It is from there cinematic titles pack👍🏼
@dscubr
Жыл бұрын
How did you manage to disassemble the tilta V-mount plate? With mine it seems impossible to unscrew the cover that you have to remove to get rid of the unlock mechanism as you said at 13:00 (It’s the exact same plate)
@freeston1
Жыл бұрын
Fabulous video. Subbed! Question: Do you find you can use the top handle with the monitor there?
@joenicklo
2 жыл бұрын
Nice b-roll. Love the motion graphics too.
@jaredlank
2 жыл бұрын
Thank you! Still getting into the groove for KZitem but I felt like I achieved what I was after with this one!
@jeffelstone
Жыл бұрын
Thanks for making this video! Appreciate the insight and the attention to detail. I've been going mad with research for the best FX3 rig and you convinced me to go with this setup 🙏🏻
@justinwbecker
Жыл бұрын
Question, you said its good to have the rode and sony mic running together as a back up. Are you recording the rode into the camera? And if so how? Wouldn't that be too many channels.
@earthwatcher2012
Жыл бұрын
Has anyone calculated whet it would take to buy and assemble this whole thing ? looks awesome 😎
@gerrypi51
Жыл бұрын
How do I use a French Flag when I need access to the variable ND filter at the same time. With a matte box you cannot turn the variable ND filter.
@joeumali7375
Жыл бұрын
you see how your drive sticks out of the atomos ninja v? if you have a samsung t5 ssd layin' around, you should look into the andycine lunchbox.
@CMFSD
Ай бұрын
This is insane rig now, good job. Where did you get the xlr input 3:16
@petrub27
2 жыл бұрын
I can't remember people rigging up DSLRs when they took by storm the world of videography. crazy
@jaredlank
2 жыл бұрын
Wild right? I never saw the point when people did it early on with DSLRs but now that cameras have great codecs that are actually useable it makes sense!
@rickbiessman6084
Жыл бұрын
Great rundown! Thanks so much for taking the time to go into all those details. There are so many things that are easy to overlook when putting together a rig in your mind, especially those tiny details with cages, clamps, handles etc. So other people’s experience is invaluable. Thanks again man.
@FX3user
2 жыл бұрын
I didn't see a tripod and head listed?
@jaredlank
2 жыл бұрын
My bad! Manfrotto 504HD on a 535 2 stage carbon tripod!
@aa1shots
2 жыл бұрын
Will a 24mm suffice this rig?
@jaredlank
2 жыл бұрын
I would think so! There is a comment that goes into more detail about potential vignetting issues though, so I’d give that a read!
@aa1shots
2 жыл бұрын
@@jaredlank thank you!
@aa1shots
2 жыл бұрын
@@jaredlank thank you i ended up picking up the 35mm really excited to build this just a few backorders. I appreciate your video so much!
@jonathankehoe6924
2 жыл бұрын
Great video. I have a nearly identical setup. I haven't been able to get the built in screen to work while using the atomos. Do you know what settings need to be changed? thanks in advance!
@jonathankehoe6924
2 жыл бұрын
also, how the heck did you get the quick release button off of the v-mount battery holder?!?!?
@jaredlank
2 жыл бұрын
Thanks! I believe the setting to keep the built in display on is in the external output menu and you have to disable HDMI info display. Hope that helps!
@jaredlank
2 жыл бұрын
On the Tilta micro v mount you can remove the actual mount mechanism from the plate and just take out the handle!
@AdamFunk
2 жыл бұрын
It's worth mentioning that the Røde Wireless Go II is $300, not $400 - which is a lot of its appeal, in my opinion, considering it has two TXs. Otherwise it'd be an easy choice to just grab two Zoom H2 units.
@jaredlank
2 жыл бұрын
Thanks for the edit!
@MaikHansen
2 жыл бұрын
Love this setup! I'm currently building my sony a7iv rig which is kind of similar but also different 😅 honestly I was super suprised after watching your video that you "only" have 959 followers - just subscribed and will check out more videos 🔥
@dougwilliams8981
Жыл бұрын
Ninja vibrates and the resonance goes through the handle to the mic. Wanted this to work but...
@natashanicole7408
2 жыл бұрын
I wish the go II didn’t have the terrible interference noise when using it with the fx3
@isamediaa
14 күн бұрын
loved this , would say this is my dream build but by the time i am able to afford it , itll be a vintage rig LMFAO
@CaleMcCollough
4 ай бұрын
Bro, how can you forget about the FX30?
@Brandon_Muscles
Жыл бұрын
Does the monitor attachment you have allow you to flip the monitor around so you can see yourself if you are filming yourself?
Пікірлер: 323