Just replaced my early 2000’s barrel grip Bosch with this jigsaw. I still works. hopefully I’m not disappointed
@adamsimmons59
6 ай бұрын
Thank you a great demo all about the tool and not about the person.
@barkingshark6413
9 ай бұрын
Great video, I’m buying one. Regarding the orbit or stroke making splinters, I would suggest taping the area to be cut, and then make your cut through the tape. This should eliminate the splinting on stock such as plywood. Great review, thanks for the time.
@kevinbarber3208
10 ай бұрын
I really don't dig that strobe crap,, thanks for the demonstration tim, great show
@exigauner
Жыл бұрын
Festool best jigsaws with mafell on the Planet👍
@jnmc-vx4fw
Жыл бұрын
Festools cordless would be equivalent to boschs but Mafell makes the best cordless or corded tools
@saulgoodman2018
Жыл бұрын
Mafell is even more overpriced then Festool.
@HarrisonKeppler
Жыл бұрын
Mafell saws are probably your best option when you're working with 3"+ wood. I love my K85
@Shoptoolreviews
Жыл бұрын
Mafell definitely makes some great tools as well. Most "general" users are not a great fit for either, due to price. However, those that really desire to have the best performing and most ergonomic (less vibration) tools, the price for Festool and Mafell fall in line with the value.
@exigauner
Жыл бұрын
Festool are better than bosch, ihave bothe. Maffel is nice but only corded and no led Light, and the dust collection is not as good as festool i have Maffel one too😉
@Mike-dn4ju
Жыл бұрын
@@saulgoodman2018Mafell manufacturers over 85% of parts in house to maintain the highest possible quality. Mafell builds the absolute highest quality timber framing saws possible, with zero compromises. They’re built to be lifetime saws. The P1cc is an absolute beast, similar motor to a 7.25” circ saw or 2hp mid sized router.
@peterlancos8448
Жыл бұрын
Thats the only tool from Festool I regret buying...too wobbly blade drives me crazy and nonstop turning it off by hitting off switch by mistake...90% of my tools are Festool and Carvex is the worst...looking at Makita
@cernunnoskali
11 ай бұрын
There are adjustments to stop blade wobble, almost, completely. That's why it comes with an Allen key.
@peterlancos8448
11 ай бұрын
@@cernunnoskali don't agree at all I have had adjust jigsaw in the shop still the same problem ... completely wrong design
@stevenh915
9 ай бұрын
look for this link in you tube "Festool's Worst Tool fixed!?! No more Wobbly Blade. All Carvex Models. Bradshaw Joinery" i had the same problem, i applied the fix and no more flapping blade, it takes a bit of adjustment but watch the video, buy the little grub screw with the spring loaded bearing and fit it. slight adjustments will sort it. iv done mine and its not perfect but its way better. unfortunately there isnt a work around for the stupid switch positioning that i know of.
@Mike-dn4ju
8 ай бұрын
Check out the Mafell P1CC if you use a jig saw a lot in thicker material. Not cheap, but it’s a monster.
@MadLadsAnonymous
Жыл бұрын
How's vibration and accuracy compared to the Flex? Have you tried the latter with the stacked lithium batteries?
@exigauner
Жыл бұрын
vibration is so little, in germany we have rules for safty. you can use only tools with good dust collection and less vibration on professional job side, festool is on of the most used tool brands and is made in germany too.
@debandmike3380
8 ай бұрын
Why don't you review the 2012 Lexus RX while you're at it. I get it though most of festool products don't chang in over a decade but people still need a tool so you still need to keep it relevant with the reviews.
@jjjerbear777
9 ай бұрын
i love my carvex but ...there is no air blowing the dust clear of the blade area .. you can use a vacuum but who wants a hose hanging out of the back side of a jigsaw? it's definetly a design flaw
@fiolica2000
2 ай бұрын
When you test festool with some crap of vacuum it's not very real review about dust extraction. I'm sure if you use quality vacuum results would be much better.
@DGALVIN45
Жыл бұрын
Not diggin the strobe effect. Does it have the option for constant lighting?
@exigauner
Жыл бұрын
yes it has
@louisd95714
8 ай бұрын
Anyone who works at a DIY level would be idiots for purchasing this. However, I understand the price point for woodworkers and for the perfectionists.
@Shoptoolreviews
8 ай бұрын
We agree. Thanks for watching.
@Griffinwoodworks
Жыл бұрын
I’m really surprised there’s not a lot of hate for festool in the comments yet lol. It must just be woodworkers that are divided over it lol. Break out a domino if you really want some interactions lol.
@Shoptoolreviews
Жыл бұрын
For most Festool tools, if you use them, it's really hard to hate them. They typically perform very well and their ergonomics are typically excellent with very little vibration. Thanks for watching.
@jeromeborle564
Жыл бұрын
The new bosch is best on almost everything !!
@peterlancos8448
11 ай бұрын
Got the new Bosh after a week of using blade broke can't take it out... disappointed
@user-ip3yw8hc1k
7 ай бұрын
💥💥💥👌👍😎
@christianamorim7747
8 ай бұрын
Really nice but i hate the fucking light flashing in my eyes..
@pjp1184
2 ай бұрын
You can turn light off or make it on steady
@debandmike3380
8 ай бұрын
so you just said Festool needs no explanation, then you go into wasting time explaining the systainers... in any case, I have the makita and HATE the double start button. stupid design. I dread using it, too bad because other than that is is very good. The carvex has the left handed single on/off switch that is easy to locate with thumb. Much better. With the makita, after a cut I have to lift it up and seek out the flat buttons on the other side to turn it off. Stupid design. I already said that. Dust collection also nice since I am constantly blowing on the blade to see the line.
@lukefoster5839
4 ай бұрын
I had the makita one too until it was stolen, I found that really irritating as well as the soft start.
@raybod1775
Жыл бұрын
Dewalt battery powered jigsaw is less than half the price.
@boosted2.4_sky
Жыл бұрын
But then you would be a regular Joe Schmoe on the job site....🤭
@jnmc-vx4fw
Жыл бұрын
As a dewalt user , yes it’s a third of the price but it’s 1/3 as good also. If your a diy then it doesn’t matter, as a professional, yes it does and price doesn’t matter
@Shoptoolreviews
Жыл бұрын
Correct, but the DeWalt doesn't come close to the features, ergonomics, and performance. Thanks for watching.
@exigauner
Жыл бұрын
And less half ass good as the festool 😂
@exigauner
Жыл бұрын
And dewalt has a lot of quality issue, they Tools broke to easy. Thay should change the Name to default😂
@WalterBarger-io9ck
Жыл бұрын
Way too expensive
@Shoptoolreviews
Жыл бұрын
For the general user, yes, but not for some. Thanks for watching.
@exigauner
Жыл бұрын
And way to good, for diy user. Festool is only for pro workers
@WalterBarger-io9ck
Жыл бұрын
@@exigauner I am a professional but wipe
@markr1142
8 ай бұрын
Worst thing festool make.
@fuzzzeballs
8 ай бұрын
yeh now i know how mine works, festool isnt exensive its all the others are just cheap crap
@louisd95714
8 ай бұрын
Not true. Milwaukee also makes a great jigsaw in their Fuel line.
@fuzzzeballs
8 ай бұрын
mine burnt out real fast so i just went over to festool, cant be arsed with tools that let me down@@louisd95714
@saulgoodman2018
Жыл бұрын
Fot the price, it is not worth it.
@jnmc-vx4fw
Жыл бұрын
Not if your a diy guy , but for a professional, yes it is
@Shoptoolreviews
Жыл бұрын
It is for some, and it makes sense. If you're in general carpentry or DIY, then it probably doesn't make sense. However, for the more Professional users, they find more value in the ergonomics and performance. Thanks for watching.
@exigauner
Жыл бұрын
Never had better one than Festool, try a lot of jigsaws dewalt, bosch makita and milwaukee. Dewalt even broke twice on me
Пікірлер: 52