Smith SCUBA Services, SF, CA Bay with 30+ years experience on anode changing recommends this video highly. A+
@WestMarineInc
7 жыл бұрын
Thank you!
@AntonioMartinez-nd7vk
7 жыл бұрын
Very good video, as a CP specialist I endorse it! Excellent!
@WestMarineInc
7 жыл бұрын
Thank you!
@GatorGillLLCSteveandTresaShort
8 жыл бұрын
A lot of boat owners are doing their own boat hull maintenance and cleaning. We at Gator Gill help provide safe and cost effective ways to help boat owners stay under water and complete their tasks. Knowing wither to use a zinc or magnesium based anode is also key too a properly maintained vessel. Your video is very informative thank you.
@WestMarineInc
7 жыл бұрын
Thank you!
@Shadow1776
6 жыл бұрын
Thank you. Just what I needed to know.
@matthewkolb9950
3 жыл бұрын
Excellent explanation. Thank You!
@WestMarineInc
3 жыл бұрын
Thanks, Matthew!
@fliegenbet
3 жыл бұрын
Thank you very much. very informative video
@WestMarineInc
3 жыл бұрын
Thanks for the feedback, Mohsen! We're glad it was helpful!
@07bently
4 жыл бұрын
6:48 So just to be clear paint should be removed bellow the anode..
@hughsmith4008
4 жыл бұрын
Very interesting
@allenletizia321
4 жыл бұрын
Do you know any thing about the 3 s/s wire? Were they go on Alpha 1 .
@simoncorporation3
11 жыл бұрын
Informative, good job.
@WestMarineInc
7 жыл бұрын
Thank you!
@davidmike9389
6 жыл бұрын
I didn't realize anodes were recommended in fresh water. Where should I attach the fresh water aluminum anodes to my pontoon?
@michelnadon9296
6 жыл бұрын
WROUGHT IRON fence are quite expensive and anode protection would be nice. salty roads . is that possible
@Kim-hl8mf
3 жыл бұрын
Very Interesting
@waynekrause6773
7 жыл бұрын
Could somebody tell me about arms that rest on shaft drive in board boats are they for anodes? Thank You Wayne
@758Dino
3 жыл бұрын
1. So what anode does one put on an aluminium hull in salt water? 2. Can Aluminum anode be used on aluminum hull? 3. I have some galvanized wire mesh fish traps, can i use aluminium foil as an anode?
@WestMarineInc
3 жыл бұрын
Most aluminum anodes, such as those from Martyr, are composed of a different alloy than what's used in the construction of aluminum boats. This allows them to be effective for use with aluminum boats in brackish water and salt water. Aluminum foil could, in theory, be used as an anode with different metals. However, we are unable to provide any estimates on the effectiveness or longevity of it for your application. We recommend contacting us at 1-800-BOATING (262-8464) or visiting your area West Marine store location to discuss the best anodes for you.
@johncardow2493
2 жыл бұрын
good video. can I replace a 2" zinc on a trim tab with a 3" zinc ? is bigger better?
@WestMarineInc
2 жыл бұрын
Hi John - Thanks for reaching out to West Marine! Bigger is not always better. We suggest sticking with the manufacturer's recommendation on this.
@adventuresofwillandshelby6013
4 жыл бұрын
What if I venture into fresh water just as often as salt? Do I get both anodes and change accordingly?
@WestMarineInc
4 жыл бұрын
The only anode material that works in more than one water type is Aluminium, which works in both salt and brackish water. Let us know if there is anything else we can help you with!
@adventuresofwillandshelby6013
4 жыл бұрын
West Marine Thank you so very much West Marine!
@WestMarineInc
4 жыл бұрын
@@adventuresofwillandshelby6013 Of course!
@phasorsystems6873
4 жыл бұрын
Hello could you test this software? explore androidcircuitsolver on google
Пікірлер: 32