One thing I would add, as I didn’t notice you mention it, is to check for runout in the ejector rod. With the cylinder swung open, spin the cylinder and look for a wobble in the ejector rod, there shouldn’t be any. Wobble here is typically caused by flipping the gun to let momentum forcibly close the cylinder...not a good thing. In the event you have a gun that needs this addressed, Larry Potterfield at Midway USA has a video on how to correct this.
@RequiemForYourDream940
2 жыл бұрын
Needed this info on why, thanks 🤘🤞🤙💯
@thefleaflop
2 жыл бұрын
Totally agree... Roll my eyes every time I see someone do this. Creates stress on the pistol and is not faster, epically if the cylinder does not lock in the first try. Good point.
@stevebardfield7391
4 жыл бұрын
The first gun I purchased was a Smith 586 back in the early 80s. Thousands of rounds and a few years later it still passes the tests in your video. Thanks much for sharing your expertise.
@2agbh72
4 жыл бұрын
Great instruction. Thanks for giving us your time with straight forward instruction and no long winded yap yap about everything but what we're trying to learn.
@lonestardude6283
4 жыл бұрын
Thanks David! I own semi autos as well as "wheel" guns! I use my 5 shot Chiefs Special as my every day carry and truck gun! This information will be used upon my next revolver purchase! Much appreciated!
@superbowlofselfabuse
4 жыл бұрын
This was incredibly informative. Very unpretentious. Coming from someone who has just about no idea on where to start with revolvers, this was very valuable. Thanks!
@JGray1968
4 жыл бұрын
Don't rely on any single source for this information.
@drdrake63
4 жыл бұрын
Jim Gray I agree
@metaldog007
4 жыл бұрын
This is a very informative and educational video. I am very familiar with revolvers but you have shown me a few things I didn't think about when it comes to owning a revolver.
@matthewrobinson4323
4 жыл бұрын
Thank you so much for this excellently presented and educational video. My edc for the past 6 years next month is a Smith and Wesson 442 (no lock), and I absolutely love it. My Holy Grail gun is a Smith and Wesson Model 10 Snub Nose.
@patrikloring7956
3 жыл бұрын
Very informative. I needed this to buy a revolver. There is one thing .003 is three thousandths not hundredths, just a slip of the tongue good info.
@zivendine
4 жыл бұрын
EXCELLENT!! Although I already knew most of what you said. I’m saving your video as a refresher every time I’m on the verge of wheeling and dealing for another S&W revolver. While Backpage was still active I preyed upon the young’uns that inherited dad or grandpa’s S&W that was anxious to trade it away for a plastic fantastic Wonder Nine.
@RequiemForYourDream940
2 жыл бұрын
G-Locks are still highly reliable lol And they're polymer 😏😎 Still love my chief special 38 though🤘💯
@alejandroespinosa8303
4 жыл бұрын
Very informative thank you .... I finally understand about the canted barrel ... I sent one gun back to smith for that reason ... I don't believe to pay this kind of money for a less than perfect gun.
@sergeant_t2020
4 жыл бұрын
I have a new S&W 460 XVR with about 100 rounds shot thru it. The cylinder lockup is good. I have shavings, or lead spray, every time I shoot 5 rounds or every full capacity of the cylinder. I never knew about this term before. Thanks Dave.
@Eddy-gc2vx
4 жыл бұрын
As soon as you dropped the hammer and trigger still pulled back and checked lock up i was impressed. I was taught that some years ago. Your the first one to demo that . Most only ck it un-cocked and then cocked, but dont lower the hammer and cked Gteat demo.
@d.t.5290
4 жыл бұрын
Wow, love the videos. My family came from MN. Some very smart people still there.
@David-fp7yc
3 жыл бұрын
Great video! The only other thing to check would be removing the grips and checking to see if there’s any rust or pitting under the grips, as these areas are often not cleaned regularly. Thanks for sharing.
@Honu-up3ou
4 жыл бұрын
Thanks Mr. Drake, I'm looking at buying a Ruger Security Six and this has great information.
@jimmansayagan7681
4 жыл бұрын
Thank you very much, Dave for this very helpful post of yours.
@Britspence381
4 жыл бұрын
Very useful and well presented information on revolvers, thank you.
@noexcuses6727
4 жыл бұрын
Another good reason for end play is errosion of the forcing cone which occurs if there has been a bunch of rounds put through the firearm and the only fix is to replace the forcing cone and that's expensive.
@kirkmarrie8060
4 жыл бұрын
Outstanding presentation! Thank you.
@j.jackson8083
4 жыл бұрын
Great video! Just what I’ve been looking for! After shooting plastic guns and other semis for almost 40 years now. Recently started falling in love with the older (used) wheel guns. Fortunate enough to have the money to pretty much buy whatever I want, but knowing very little about them mechanically, makes me a prime target to over pay. Very well presented. Thanks again!
@shanescatsandcannabisfarm2965
Жыл бұрын
If you have all that $$ you SAY you hBe then don't be complaining about over paying... Also watch out for guys like me who will rob you after hearing you brag about having $$ like that
@Ineeadifferentusernamelol
9 ай бұрын
@@shanescatsandcannabisfarm2965you wouldn’t rob anything from these guys but the ammo from inside their guns.
@Ineeadifferentusernamelol
9 ай бұрын
Me too, I’m Almost 22. Tired of everyone looking at me like im an idiot. I know what im talking about. I’m also not afraid to admit when I don’t. But other people see I dropped my ego and they can’t play games with me and I know that upsets them.
@gregb6469
4 жыл бұрын
Very useful video! As one who is somewhat new to handguns I found it quite informative.
@wethepeople1871
4 жыл бұрын
A very informative video good sir. I really like how you took your time to explain many aspects the of revolver. I didn’t see any Rugers in your collection, and was wondering why. As for revolvers with wear and maybe slight pitting, I personally like leaving them wrapped in a slightly oiled rag/shop towel (the cleaning towel) just to make sure they have a slightly oiled barrier. But overall good sir, a great video. Thank you
@faptainamerica9049
4 жыл бұрын
I need a video like this for single action/ gated. This is still very informative. Thank you sir.
@drdrake63
4 жыл бұрын
Andrew Brown I’m glad to help. I’m sure there’s plenty I left off too.
@daves5765
3 жыл бұрын
Great video! The more I understand and learn about revolvers, the more I realize that revolvers are not "simpler" or necessarily more reliable than a good auto like a Sig or Glock. With all the internal linkages and required tight alignment of all those moving parts in a revolver makes me feel more comfortable with a semiauto. My Glock has fewer moving parts than a revolver for sure and always has perfect barrel lockup and alignment! I still love my revolvers though.
@vrod1a
4 жыл бұрын
Very helpful and informative for me 👍 I am thinking of buying my first revolver, thanks 🙏
@edwardzamorski3711
4 жыл бұрын
Thanks your video's on revolvers are great
@progressivegunowner8066
4 жыл бұрын
Very well done video. A lot of good info. Thinking about getting a revolver.
@tonyrebel63
4 жыл бұрын
I have 2 Taurus one 38 Special and a 605, 357 magnum. Love how the trigger action is smooth.
@kevinobrien7529
4 жыл бұрын
Thank you for the video you've given me a nice bit of information to digest
@tonnywildweasel8138
5 жыл бұрын
Thanks for sharing your information! Appreciate it a lot. Greets from the Netherlands, T.
@randallthornburg8448
4 жыл бұрын
Rather informative video, a few technical inaccuracies, but overall well done. The measurement reading errors were previously pointed out, a couple nomenclature errors, that “click” you sometimes feel when shooting double action is always there, you just don’t always notice it (that’s the cylinder bolt “falling” into its locking slot on the cylinder, it’s ALWAYS there). “Stacking”is the term given to describe how smoothly & evenly the spring tension increases (mainly on the hammer spring) as you pull the trigger in double action (it’s a term commonly referenced in archery when describing how “smoothly” a traditional bows can be drawn) Good info 👍
@henrygallego9197
4 жыл бұрын
Love my model 19-3 and love his collection
@metaallegretto6562
4 жыл бұрын
Thank You! huge amount of information. I'm going to buy a gun today and you've helped a ton!
@sock979
4 жыл бұрын
Thank you for explaining that I am glad that I finally understand it I actually went to check my 686 well I don't know they can be called at 686 anymore but it was barely any movement judging by the eye so I am glad that you explained that so I could finally check that the $1,200 I have into this thing or at least in that aspect worth it I had a Clark customs 6-in slap-sided barrel and aristocrat side rib put on it do you know what I would do to check that
@maxjboy
3 жыл бұрын
My favorite is my grandpa's .38 special Smith and Wesson snub nose revolver
@frankdn109
4 жыл бұрын
A useful video, thanks! One suggestion, if you decide to do an update some time... maybe the most important safety check: can you push off the cocked hammer?
@peggynulsen1365
3 жыл бұрын
Accurate, straightforward advice for the novice looking for a good double action used revolver. Good job sir.
@TheLoneRanger745
Жыл бұрын
I resently learn about a forcing cone alignment reem tool sold by "Brownells". It's a kit with all the necessary parts to correct any irregularities of the forcing cone angle. The guy that showed before and after target test results it made a difference. He explains the same thing Your saying about led building up because the bullet isn't going straight through the cone , this also causes a slight wobble affect down the barrel which causes poor groups. There are only two companies I've heard of that through bore the cylinder down the barrel for perfect alignment, one in France, the other is US American Manufacturing company , if I remember correctly. Thanks for sharing your hobby 🤠
@texassportsman5880
2 жыл бұрын
My gunsmith has made recommendations in the past on what revolvers are a good buy based on availability of spare parts for a shooter. The last revolver I bought, a 586 4". Over the years someone had shortened trigger rebound spring by cutting loops, the chambers of the cylinder were out of sync with the barrel. He made the necessary repairs. He warned me away from vintage Python if I was looking for a shooter due to lack of spare parts and complexity of re-assembly. Good advise.
@Zaku2077
5 жыл бұрын
Thanks for info. Been getting into S&W revolvers lately.
@lobowolf9406
4 жыл бұрын
S&W make the best revolver my opinion
@rosemccoy5436
4 жыл бұрын
Thank you. I am looking for personal protection.
@larkinoo
4 жыл бұрын
Good vid David, informative and presented with the intelligence and maturity that comes from someone who has lived a while on this here planet. I too am a revolver guy. I love shooting them and then taking them home and cleaning them up fresh again, all done with a lot of love. About gun screws........I think everybody that owns any firearm with a screw on it should also own a gunsmith style screwdriver set, PERIOD !!! They are not expensive. For all you nubees out there reading this, DO NOT, I repeat, DO NOT use your mechanical screw drivers on ANY of your firearms. If you want an explanation why this is so, talk to a knowledgeable gun guy at your favorite gun store. He/she will fill you in.
@drdrake63
4 жыл бұрын
Doug Prominski That is such an excellent point regarding the screwdrivers. One can get a set of gun smithing screwdrivers with hollow ground tips for a lot less than the value you will erode from your fire arm when you booger up a screw.
@bradleyburdett5361
4 жыл бұрын
That goes for fine watches as well
@MClark-bv9tn
4 жыл бұрын
@@drdrake63 you say hollow tips, seems weak so not getting the image. What makes them better for the application?? Picture maybe in use if you have an opportunity to. Thanks for your well played out videos they are some of the best out there. Maybe they break before jumping and ruining or scratching/ gouging your firearm??
@duophone3338
3 жыл бұрын
I have a colt police revolver from 1945 .38 spl with 5 inch barrel well over a hundred years old and still shoots smooth and straight and unexpectedly accurate too...Grandfather's revolver might be old school but that thing still works like the day it was first brought...Alot of barrel marks and holster wear on the outside but rifling and cylinders everything is still in mint condition just needs a polish
@theresathomas7802
4 жыл бұрын
Thank you my husband and I followed perfectly with you. Great information
@justifiedfan98
4 жыл бұрын
Just found this. Great vid!! this really helps newbies like me!
@mikemcmanus7665
4 жыл бұрын
Thank you for showing me what to look for when evaluating a Revolver.
@BertieW0oster
4 жыл бұрын
I'm OCD when it comes to having perfect screw heads on my guns, I don't want to be "Bubba" Lol. What's funny is my brand new S&W revolver actually came straight from the S&W factory with chewed up screws! I know it was new because the SN# manufacture date was just 2 weeks old from my date of purchase, and I bought it straight from a reputable gun dealer. Anyway I got brand new side plate screws from S&W and put them in MYSELF, using the correct drivers. Now it's perfect!
@thegrassisbluer09
Жыл бұрын
When you check the bore, use a piece of white paper against the back of the frame and it will show the condition of the barrel very clearly.
@mcdicky
4 жыл бұрын
Thank you for the education of revolver.
@russelder9743
5 жыл бұрын
David-------this was excellent, I really learned a lot, some things to look at...........my wife gave me the green light for a new 357................probably going with your 586...........have a nice night brother
@drdrake63
5 жыл бұрын
russ elder love the 586. I know you’ll love it too.
@budm.1450
4 жыл бұрын
Your wife gave you the go ahead?? Seriously??
@stephenbrown6763
4 жыл бұрын
I don't ask my wife permission for anything. In fact I used to get mad about her wasting money, now if she does I just buy another firearm. So if she wastes money I win, if she doesn't, I still win. She wanted a camper (I hate camping), I just got a huge grin on my face. We do not own a camper...😉
@scottzappa9314
4 жыл бұрын
@@stephenbrown6763 uh yeah. Way to save that money chief, that'll show her! Does she ask YOUR permission for anything? LOL.
@stephenbrown6763
4 жыл бұрын
@@scottzappa9314 We save money, could save more though.
@danbuter
4 жыл бұрын
This is a fantastic video! Thanks!
@iaidagger8278
Жыл бұрын
Thanks DrDrake very precise information I am great fan of S&W revolvers !!! Greetings form an Argentine S&W revolvers enthusiast !!
@pauljnolan1000
2 жыл бұрын
I really enjoy all your videos and very much respect your experience and judgement. That said, the difference between 0.004 and, roughly, 0.007 and 0.008 is three and a half one thousandths, not three and a half one hundredths. One nunber is, of course, ten times as large as the other, a difference that an engineer or machinist would probably deem tooooo large. Though not always. Once, decades ago in chemistry class, I showed my answer, "x" x10^27, to the professor, whose answer was "y" x 10^28. He looked at my work and said, "You came within an order of magnitude. That's close enough," and marked it correct. The lesson I took was: all things are relative, including measurements. Good to keep in mind when the Instant Recall doesn't go your team's way.
@mcintoshpl
3 жыл бұрын
Thank you. Enjoyed it and learned a lot.
@normanmallory2055
5 жыл бұрын
Looking up S&W history and why certain perks were done to the revolver it became an interesting adventure .. I own a model 17 K-masterpiece that i have owned for years and it has the pinned barrel .. I also own a model 19 which has a pinned barrel also.. Added Cost was the biggest thing and the shooting public complained about $4.00 for this , and $3.50 for that task and so forth ( which is why the triple lock became a hard sell )..My old model 28 has a counter bored cylinder and pinned barrel , so it's more machine steps and takes longer to finish the gun.. I have myself and others have had it happen to them, some makes of brass even though it falls into SAMMI spec's won't fit the counter bore and drop in the cylinder all the way..I have also found this true with Feedom Arms revolvers too and more so kind of picky in my book, while at the range one day i had a box of Federal loaded brass and almost none would drop in the cylinder So i switched brass to loads i had using Starline brass and they all dropped in..The other thing i read was complaints from owners about this problem, S&W said the counter bored area must be clean of all deposits at all times , difficult cylinder rotation at times because one or two cases was thicker on rim measurement... That and the deposit built up on the face of the frame made cylinder rotation hard at times too..I've shot with fellows who would after a box of 50 rounds , open the cylinder and wipe off the face of the frame and was good to go once more ..so there were drawbacks with that ..Who would have known that these features all these years later those guns would command the price they get for them.. a triple lock 5 screw , last time i looked at prices oh ya i would have to take my banker along with me to buy one...
@jazzman5598
4 жыл бұрын
😂
@fabyanserrano00
Жыл бұрын
The fact i barely understand what the fuck you're talking about makes me more interested in learning.
@normanmallory2055
Жыл бұрын
@@fabyanserrano00 There are several excellent history books on S&W history ! Standard catalog of Smith & Wesson is excellent! Also Roy Jinks has authored several books , all excellent history ! The excellent Blue Book of Gun Values is a must to have also !
@bryanbaldwin6979
4 жыл бұрын
Are you the Dave Drake who worked at Rolla Sporting Goods in Missouri back around 1980? If you are you completely redone an 1873 Winchester for me. I am still amazed and proud of the job you did. It still looks amazing and beautiful. Thank you. I knew then you would go far and do well in the gun trade.
@drdrake63
4 жыл бұрын
Bryan Baldwin not me, but I am from Missouri and I went to school in Rolla
@jefffawver3389
4 жыл бұрын
Thank you for sharing your information.
@jazzman5598
4 жыл бұрын
Superb vid Sir! Thank you!
@bikegunexpert6010
5 жыл бұрын
this is very informative..great video
@GGlitter72
4 жыл бұрын
these are awesome vids dude....ya really know what ya talkin about...found your channel on the flitz topic. thanks for that and many cheers from germany ...stay safe man during covid 19
@drdrake63
4 жыл бұрын
GGlitter72 thanks! You as well
@bassmangotdbluz3547
4 жыл бұрын
Great information even if it's a refresher for me and thanks for the George Thorogood & The Delaware Destroyers on your intro bumper. It makes me like your channel even more.
@seandonovan4186
4 жыл бұрын
That's "You got to lose"
@bassmangotdbluz3547
4 жыл бұрын
@@seandonovan4186 Written & first recorded by Earl Hooker
@OutnBacker
3 жыл бұрын
My 'smith looks for a gap of between .003", which is the minimum tolerance to still function with leading building up in the gap, to .006", which is optimal. .008" is getting up there but does not necessarily mean the gun needs help. Most guns will behave just fine regarding lateral flash and shedding out the gap. If you have a revolver that tends to tighten up a bit during the latter periods of a long shooting session, a minimal gap may be the reason as the fouling thickens. A quick bristle brushing will often loosen things right up.
@genelyda1102
3 ай бұрын
Thank you for the information on the Smith & Wesson revolvers with pin barrels that explains why they are straight extremely accurate. Thank you again.
@rosskennedy
Жыл бұрын
Great info, my revolver is S&W model 67-5 38 + special, the lock up is great info on how check.
@kylewood8327
3 жыл бұрын
Great info here...unfortunately trying to buy a revolver, or any type of gun for that matter, is just a ridiculous process in today’s world. Everything is WAY overpriced!
@harperhellems3648
2 жыл бұрын
Two years ago a S & W .38 Airweight style revolver was $349. Today $547. The ammo? 3X more right now.
@kylewood8327
2 жыл бұрын
@@harperhellems3648 yep, don’t see any changes coming either, hope you’ve been all stocked up!
@usrenaem
Жыл бұрын
It’s called inflation. We had everything cost more: homes, cars, guns, food. The reality is in that we need to learn and earn more and more to keep the same level of comfort. Actually it always was like that.
@kylewood8327
Жыл бұрын
@@usrenaem Well, I’m glad you seem to be ok with it! I think it’s gone way overboard.
@popgfk9989
4 ай бұрын
@@usrenaemjust be content with what you have
@jimthegatekeeper59
4 жыл бұрын
Great helpful video! One question... How could you tell when your Colt was made? I've got an old Colt similar to yours and I'd love to know when it was made.
@karlt8233
4 жыл бұрын
Colt's website has a serial number lookup and it will provide you with the year if manufacture based on the serial number you enter.
@stitchlilo01
3 жыл бұрын
Very informative, Sir! Thank you.
@dondromano6099
4 жыл бұрын
Great information, thank you for sharing!
@davidchilders9472
7 ай бұрын
Very Good video! Timeless and accurate advice. Thank you.
@Quality_Guru
4 жыл бұрын
Nicely done. Great info to have.
@RafaelCosta-oi3be
4 жыл бұрын
Thank you for the information!
@thejerseyj9422
4 жыл бұрын
Nicely done. Informative and enjoyable.
@joser747
4 жыл бұрын
Great video! Thank you for all the info.
@deaneliot8230
4 жыл бұрын
Excellent video, thank you for taking the time to educate us with this valuable information.
@garyK.45ACP
4 жыл бұрын
It's your gun, do as you wish. That said...Colt Trooper MKIII, yes you can get parts for them from places like Numrich. The MKIII action was designed to be safe to dry fire. It has a transfer bar and the hammer face falls directly on the solid frame. The transfer bar imparts the hammer energy to the frame mounted, spring loaded firing pin. The MKIII is a hell of a tough and durable revolver, though not as finely tuned as the older (pre-1969) Colt's. I carried one (nickel plated 4") as a police officer from 1973-1988 when our department went to 9mm autoloaders. I still have the gun (we had to buy our own revolvers at that time) and it is working perfectly to this day. It has been dry fired countless times. It cost $154 in 1973. I still have the box and receipt for it. That was a lot of money in 1973. The Python, at that time, was WAY EXPENSIVE...at a retail price of $250!
@CF-rx7hx
4 жыл бұрын
Nice video Dave. Enjoyed it.
@TarmanDan
4 жыл бұрын
Great review on revolvers! I have Glocks..Smiths ....I'm getting into wheel guns now...just bought a GP100 and I love it!
@warmothgmc
4 жыл бұрын
Dan Caron I have a GP100 I picked up in the 90’s. The thing is a tank. Mine is a 4” stainless .357 Magnum. I prefer the triggers on the Smith’s; but, the GP100 is an affordable alternative. I also have a Smith 66-1 K frame from the ‘70’s. . For that one, I prefer not to put full load .357 through it too much. Pretty much stick to .38 Special loads for that one.
@TarmanDan
4 жыл бұрын
@@warmothgmc Same here...bought the 4 inch stainless in 357
@MClark-bv9tn
4 жыл бұрын
Dan Caron, I've been trying to decide between the GP100 & the 686 smith, could you say why you chose the Ruger over any other? Personally I'm all about Ruger but Smith & Wesson makes a great gun too. I've heard them GP100'S Are a beast and you can shoot many rounds at once without any trouble.
@warmothgmc
4 жыл бұрын
M. Clark both of them can handle a heavy load. The GP100 was affordable for me at the time. I prefer the triggers on the S&W. You really can’t go wrong with either; but, there are a couple primary differences. 1. The Ruger frame is cast, as apposed to the the forged frame on the S&W. The grip on the S&W is full tang. The Ruger uses a wrap around grip insert over the main spring assembly, rather than a full frame grip. The S&W also has side plates you can remove to work on the internals. The Ruger doesn’t. Both are great revolvers in any case.
@MClark-bv9tn
4 жыл бұрын
@@warmothgmc Thank you
@jimsmith2470
3 жыл бұрын
Great video I never get to much info on revolvers
@juarez6947
2 жыл бұрын
Learned so much that you sir for your knowledge and time much appreciated
@TobaccoRowe1960
4 жыл бұрын
Two things I like about my Taurus Model 65 It has a wound spring so the trigger is perfect The Cylinder does not rely on the shell ejector to lock in place ! You can't check the lock up on a Taurus like that, although if you did you would find it tight. To teast my lock up I pull the trigger all the way back and release it slowly, the point of lock up should be just before the hammer hits the firing pin. It's kind of a no brain'r you know.
@1969CampEvans
4 жыл бұрын
MR. 357 I HEAR YA!!!!! ENJOYED THE VID!!!!!!!!!!!
@jeffreyMagnum460
4 жыл бұрын
You should also look for flame cutting of the upper frame, especially with magnum revolvers.
@drdrake63
4 жыл бұрын
Jeffrey Tremethick That is a very good point Jeff
@jeffreyMagnum460
4 жыл бұрын
I read about it when I was looking into reloading for my Smith 460, and that revolver can do some flame cutting with the right powder or should I say wrong powder.
@zdub8438
4 жыл бұрын
Just found a taurus 856 for $140. Teeny tiny bit of play in 2 chambers. The rest are Rock solid. I'm stoked.
@blusky7072
4 жыл бұрын
Points to consider as well, not covered: a hairline crack on the forcing cone hidden by carbon deposits as a result of overloaded ammo with higher than SAAMI specs and fixed by a new barrel. Also, a failed hammer push off test indicating the sear surfaces on the hammer and or trigger that have excessive wear which allows the hammer to fall without the trigger being pulled. This is a MAJOR SAFETY ISSUE. The fix is to have the surfaces professionally restored on the appropriate fixture (not a hand file with a vise) if there is enough metal allowing for this, or to buy a new hammer/trigger or both from the factory.
@RollYourRock
3 жыл бұрын
👍👍
@blazkowicz9455
4 жыл бұрын
Great video! I have a question, I have a 1990 colt king cobra and I can’t find any specs on gap and endshake and I even called colt. With the cylinder pushed forward I measure roughly .004-.005 and with the cylinder pushed to the back I measure .010-.011. That is roughly .006-.007 of endshake. With these numbers I have no idea if this is acceptable For this revolver? I do shoot it and it seems to shoot fine as far as I can tell.
@randallthornburg8448
4 жыл бұрын
Blazkowicz : .003-.005, you’re good 👍
@stinger4583
5 ай бұрын
Thanks. I'm in the process of obtaining a S&W 25-5, 45 colt 4". I will apply your inspection rules to it when I have it in hand.
@patrickarmitageWWW
4 жыл бұрын
Thank you for showing me what to look for. I learned a lot.
@alancodd199
4 жыл бұрын
Goes for me, just developed an interest in this subject and you talk about it very well. Thank you.
@anthonyharper8161
4 жыл бұрын
Great video...Thank you..On my blackhawk I traded my 9mm for..The cylinder needs bluing can you recommend any idea's..
@thefleaflop
2 жыл бұрын
Thanks,.. Really enjoyed the video. Well done sir!!!
@OldManMontgomery
Жыл бұрын
Good, even excellent point on 'lockup'. Forcing Cone is that section of the barrel, next to the cylinder which is tapered (very slightly) to allow all cylinders to 'line up' with the bore. One can think of the function as a "bullet funnel". Cylinder gap should be obtained from the maker. One doesn't want the front of the cylinder to rub or scrap on the rear of the barrel and must not be so loose to lose velocity and 'spit' either shavings or little particles of burning powder to the side. @ c 20:00, the S&W five shot revolver has not been carried in a holster for any appreciable time. Holster wear occurs on the sides of the muzzle end of the barrel and on the leading edges of the cylinder. The revolver shown has likely been kept in a case or drawer most of it's 'life'. That storage may explain the discoloration on the right frame panel. To a collector, any discoloration is negative. For a shooter, it will not weaken the firearm. But it is a valid bargaining chip. The flawless finish on the 28-2 is likely due to it not being used much. Stored carefully, but it has no signs of being in a holster for any length of time. The screw head pointed out does come from using the wrong screw driver. One notes however, the damage was done removing the screw, not screwing it in too tightly. I must confess I have marred a number of screw heads. I do pretty good work on the insides, and I don't mess up screws any more. In the interest of one's own peace of mind check function and such to see if the inner workings have been damaged. @ 27:00 the Colt pistol has the classic holster wear on the muzzle of the barrel. It comes from the holster rubbing on the inside of the holster when being inserted or drawn. Doesn't hurt functioning, negative to a collector. (Not disqualifying, but a demerit.) The finish on the 28 is 'blueing'. It is a matte or dull finish, but it's the same chemical process as on the Colt. The only difference is the Colt Trooper is finished better externally. They will both loose finish for the same reasons. However, mechanically the 28 (being a Smith&Wesson) is designed and built (in those days) much better for use. Finishes were rather limited. Alterations: Since I shoot double action only, I tend to remove the spur - cocking piece - on the hammer. If that to you is an alien concept, pass on it. Once I found a large frame S&W revolver in .45 ACP caliber. The original owner cut the barrel off and remounted the front sight. I find the trigger delightful and suspect a proper mechanic did some smoothing. A collector would have passed as the revolver was altered. It is in the other room as it suits me just fine. If one understands, finds the alteration acceptable and suits the mission for the arm, go for it.
@Elliot1949
3 жыл бұрын
A very helpful and highly instructional video!! Please, I would like to ask you a question: I'm looking forward to find and purchase a nice second hand Smith & Wesson Mod 28-2 Highway Patrolman .357 Mag Revolver with 6 inch barrel, because it's a real classic and a very high quality revolver, probably not as flashy as the M-27 or the lighter M-19 Combat Magnum but an exceptional handgun as well. Now, I've never heard of particular issues with this model, have you? Thank you very much for your assistance and opinion on this matter.
@smittysmith2043
4 жыл бұрын
I LOVE MY SMITH AND WESSON 60-15 WITH 3 INCH BARREL
@warrenksanbornjr.6643
2 жыл бұрын
That's a good gun
@tonyrebel63
4 жыл бұрын
Excellent video without all the gobly goop that I dont need to hear, Keep up the good work.
@richrudley2650
3 жыл бұрын
I have a 28-2 from 1966. And would never part with it.
@Notjoemamma1786
5 жыл бұрын
Great video, as well as your others. Question for you, that cheif's special, what about the crack in the trigger? when you were pointing out the buggered screws, that leaped out at me. I wound the video back and in another spot you were holding the gun and I could see that it went to the other side. That would concern me. I'm sure you've see it.
@drdrake63
5 жыл бұрын
Joe Suzenski You know I never noticed that to be honest believe it or not. But I see what you’re talking about. I actually traded that fire arm off several months ago as I’m a shooter not a collector and I didn’t really enjoy shooting it.
@kennethbrown1919
4 жыл бұрын
Small detail - .1 =1/10, .01 = 1/100, and .001 = 1/1000 so .004 to .0075 is a difference of 3.5 thousandths not 3.5 hundredths.
@Tread505
4 жыл бұрын
Wouldn't it be 3.25 thousandth since .004 is bigger then .0075
@kennethbrown1919
4 жыл бұрын
@@Tread505 it's 3.5 thousandths (if you don't believe me try .0075-.004 on your calculator) and BTW - .0075 > .004; .007 >.004, the extra .0005 only makes .007 larger, not by much but larger none-the-less (everyone knows that 007 > 004 ;-) )
@Tread505
4 жыл бұрын
@@kennethbrown1919 gotcha. Im feeling pretty dumb right now lol brain farts happen
@kennethstevenson976
4 жыл бұрын
The gap guage is primarily for valve adjustment, spark plug gaps would be to great and not complete for measuring thousanths of an inch.
@sonnygunz9207
5 жыл бұрын
I don’t think I’ve ever stood next to a magnum (22mag, 327mag, 357mag, 41mag or 44mag) revolver and not gotten hit with stuff. S&W, Ruger, Taurus and Colt. In the .357 magnum guns there’s no problems with .38spl and hitting my neighbors or getting hit standing next to the same gun. Same with .44spl. It’s all about the pressure of the round. I say this assuming the revolver times correctly and doesn’t have excessive rotational play of the cylinder.
@randallthornburg8448
4 жыл бұрын
Sonny Gunz : ALL revolvers will do that, it’s not a “sealed,” or “one piece” chamber/ barrel (has nothing to do with being a “magnum”). What you’re feeling isn’t bullet shavings, that’s “powder spray.” That cylinder gap (gap between cylinder & forcing cone) is an opening where hot powder gasses are clearly going to escape, and if you’re beside the revolver, you’ll may feel it (some “spray” out enough you can feel it, some don’t, but they ALL do it). A bullet-saving is a little piece os shrapnel, if that hits you it’ll be painful & likely draw blood. So don’t be alarmed if you’re standing by a revolver shooter & feel something when the gun is fired
@buddyjackson3148
Жыл бұрын
VERY well done ! Thank you
@GearheadExplorer85
4 жыл бұрын
I didn't know that you are supposed to check cylinder lockup by keeping the trigger pulled back after releasing the hammer. I don't see how this is any different than doing it without the trigger pulled. I would think that cocked hammer lockup would be the most important. However, I am new to revolvers and not a gunsmith. But I am interested in learning why it is done this way.
@PedroDiaz-kp8ut
4 жыл бұрын
thank you so much I learned a lot from you what does it take to get a permit!
@drdrake63
4 жыл бұрын
Pedro Diaz It all depends on where you live. I make it a policy not to advise people on legal matters, but I’m sure if you do some research on the Internet you can figure out everything you need to know
@JAFO.
4 жыл бұрын
Which roast have you liked from Black Rifle? - I'm planning to try some.
Пікірлер: 310