New to the channel and catching up. I’m impressed. I didn’t think those skid steers would roll at all with no power. Thing must have been a bear to drag around!!
@hudsonvaganis7855
Жыл бұрын
I bought a 1830 for $300. By the time I rebuild the motor and got it going I had $4,000 into it. The hard thing about buying it with out seeing it run is you ready have know idea how the hydraulics are and that will get expensive. I ran mine for about a year before the pumps started leaking it wasn’t a lot of money to put new o-rings in all 3 pumps but it’s a lot of time to take it all apart
@NockRanch
Жыл бұрын
Always a gamble. Fingers crossed!
@justinraystyles3537
Жыл бұрын
You still got a good deal on it including the parts $ you put in it!😎👍
@bobme2787
Жыл бұрын
I have a Case 1818 with the gas engine. It does not have any front hydro because it does not have the power of a diesel. But over all it is a nice little machine for my projects. I bought it last fall and only had 500 hrs. And yes parts for the older models are tough to find. I have gotten some parts from Messicks.
@NockRanch
Жыл бұрын
Thanks for the tip, I'll check them out!
@petercunningham3469
Жыл бұрын
Cab slides forward , get a parts breakdown off internet give you a chance to clean out and inspect the hoses etc .
@NockRanch
Жыл бұрын
Sounds like a plan to me, thanks!
@germantrader10
20 күн бұрын
4:12 dude looks like Murdock from The A-Team
@annenock4694
Жыл бұрын
This is like a humorous, informative T.V. show that should be on HGTV. I can't wait to see how this all unfolds.
@NockRanch
Жыл бұрын
Maybe one day!
@skydoesgames9437
Жыл бұрын
This is my first time watching a video thinking this is a famous guy with hundreds of thousands of subscribers . Looking at the count and seeing it’s 300. Holy fuck the quality of this video is insane definitely gained a new subscriber. Keep it up! 👍
@NockRanch
Жыл бұрын
Wow, thank you so much! I'll do my best to keep you around!
@markroderick3300
Жыл бұрын
I bought a Gehl 4615 three years ago with a parts machine for $1500 all in got home fiddled with it fired it up backed it off the trailer and used it to drag the parts machine off. I am still using it drove it today even
@NockRanch
Жыл бұрын
That's awesome!
@brucevallee5623
Жыл бұрын
WOW!!!! You tied into a real cream puff there!!! Shes a bute Clark!! Lol i predict some good content coming from this one. Enjoying your channel more and more 👍
@billking3485
Жыл бұрын
The skidsteer vid series could take off on you and should be a very interesting topic of all that could go wrong. I'll ride along and follow it and wish you well as your channel grows.
@NockRanch
Жыл бұрын
Thanks Bill, I really appreciate the support!
@billking3485
Жыл бұрын
@@NockRanch You have great sound and your vid quality gives good views of the tight spots too.
@NockRanch
Жыл бұрын
I'll do my best to keep it that way!
@220jonnyblaze
Жыл бұрын
This is like if Jeffery Dalmar had a normal home life
@NockRanch
Жыл бұрын
🤣🤣🤣
@coltonkruse2313
Жыл бұрын
Look forward to seeing this one. That's a dang cheap price! These machines in particular are fairly simple as far as skid loaders go.
@NockRanch
Жыл бұрын
We'll get working on it ASAP!
@Trumptrain2024Vance
Жыл бұрын
Funny how we all love a good challenge!
@NockRanch
Жыл бұрын
Keeps life interesting. Thanks for the comments!
@ericsimecek
Жыл бұрын
Grab that wrench and get after it
@NockRanch
Жыл бұрын
yeehaw!
@jeffreykarg5608
4 ай бұрын
I just bought a 1968 case 1835b. How is it going? My engine doesn't start and I think it is an exhaust valve. LMK.
@bjarnevarme9830
Жыл бұрын
I love skid steer content, subscribed!
@NockRanch
Жыл бұрын
Awesome, thank you!
@that1hippiedude641
Жыл бұрын
Awesome video learned a lot! Also don't take this personally but you would make a really good evil main character in a movie just something about you lol you should look into acting maybe
@NockRanch
Жыл бұрын
I'll take it as a compliment. Haha, thank you!
@nschelling6420
Жыл бұрын
Good luck with that one . . . The Case 1835C is probably the worst machine of the 18 series full-size machines that Case built. The Continental/Teledyne engines, gas or diesel, were junk. I’m rather curious about why that unit will roll -- if the hydro system is in normal condition, the wheel will not turn. They might creep veeeeery slowly but otherwise they will slide rather than roll. I hope either the tow valve is open if it has one or the drive motors are empty of oil.
@NockRanch
Жыл бұрын
Looks like we'll find out!
@JoeAroner-SIWAYTV
Жыл бұрын
Pretty sure the wife would have preferred siding on the garage, but a skid steer is way more practical. Besides, we all know that siding installation leads to painting and it’s a slippery slope to the inevitable watching of paint drying.
@NockRanch
Жыл бұрын
We'll definitely be getting the rest of the garage finished up this spring. Siding and stone veneer included 👍🏼
@hillbillyfranks
Жыл бұрын
Just subscribe to your channel you got a good deal on it I think Just needs a little TLC and she might roll Enjoy the channel I'll be watching more of you have a good day
@NockRanch
Жыл бұрын
Awesome, thanks for the comment!
@billyhaddock5540
Жыл бұрын
First i would get a manual for it. then work on it.
@markroderick3300
Жыл бұрын
only 2 points of tie down when 4 is is the law and it looks like your license plate is on the wrong side and you remind me of Christian Slater from the movie Kuffs with the way you talk
@NockRanch
Жыл бұрын
Not sure about other states, but in Ohio it just needs to be displayed anywhere in the rear. Also, four points is only for equipment over 10,000 lbs 👍. I've never heard of that movie, will have to look it up! Thanks for the feedback!
@markroderick3300
Жыл бұрын
@@NockRanch then why are cars on a car carrier required to have 4 points of tie down and the winch does not count
@Trumptrain2024Vance
Жыл бұрын
What area are you in? I am in the Pennsylvania mountains.
Пікірлер: 48