Well I tried, failed but I’ll never give up! Here’s my movie accurate Buzz collection video: kzitem.info/news/bejne/uGuZnq6thWacZo4
@bennyfisher9157
2 жыл бұрын
Are you going to try and make the helmet retractable again someday?
@CrispyA113
Жыл бұрын
Yeah you tried dude
@Toy_story_and_beyond
2 жыл бұрын
I think a fully retractable helmet buzz might be possible, back before Toy story one was released they made blueprints for buzz and how he worked! I’m not sure if they made blueprints on how the helmet worked but I’m going to look back at the pictures and tell you what I could find!😁
@todayigrewup
2 жыл бұрын
I hope so
@Toy_story_and_beyond
2 жыл бұрын
@@todayigrewup Unfortunately, when I looked they only showed the obvious details😔
@roycestevenl.himalla8908
2 жыл бұрын
it will be posible with clear rubber.
@peterglass8657
2 жыл бұрын
Clear rubber would make it work.
@richardkirkland6805
2 жыл бұрын
@@Toy_story_and_beyond does it show how the button for extending his wings also makes them retract?
@digisparkoldacc
2 жыл бұрын
I feel like if we eliminate the karate-chop action feature, a buzz with a fully retractable helmet could maybe be mechanically possible. We'd just have to reverse engineer the wing mechanism and lay out all the wires on the side of the shell.
@todayigrewup
2 жыл бұрын
That’s true..
@pengiunanimatorguy
Жыл бұрын
@@todayigrewup Maybe they could make the wing, karate chop and voice simulator features wireless but I don’t know how that would work exactly
@johnsambilay6285
2 жыл бұрын
I think it is impossible to make a movie accurate with fully retractable helmet for Buzz Lightyear for the fact that the Wing Mechanisms and Sound board/Speaker is all placed inside his body unless there's a transparent plastic material that can bend and retract itself inside i.e. "Plastic Film like material" but another problem would be is how will it retain it's shape when the helmet is closed since it's a soft film material. Another problem I could think of is the Button for the "Whoosh" thing. Nevertheless great video for trying and showing us your idea 😊
@todayigrewup
2 жыл бұрын
I agree but it was worth a try on a cheap Buzz
@neburselasor
2 жыл бұрын
The (affordable) technology simply isn’t there yet. In order for the voice box to work, the wiring would have to run along the wall of the chest cavity, and the speaker and circuit board would have to be confined to the head. The red wing release button would have to be electronic as well. A completely movie accurate Buzz would be on the level of the Hazbro Pulse self-transforming Optimus Prime. Never say never, but it would be very expensive.
@todayigrewup
2 жыл бұрын
I agree with you here
@jgreen2015
2 жыл бұрын
This was something I always wanted to do to my buzz light-year as a kid I think the way around the problem is as follows 1) front section of helmet (that retracts ontop of the back piece) has a transparent plastic tab glued on the back edge, protruding from the bottom. (Almost touching the back half underneath it) 2) the back half/bottom piece, has a tab on the edge protruding upwards above the edge. From fully retracted, you pull the front half/top piece around, and when the piece is full out,, the tabs at the back of pice one and front of piece 2 make contract thus pulling the back piece up and around as the front fully emerges from the drilled section
@todayigrewup
2 жыл бұрын
Yeah I don’t know how to figure that out I wish I knew how to do this
@devinsmoviecorner5553
2 жыл бұрын
How dare you open a spaceman’s helmet on an uncharted planet! My eyeballs could’ve been sucked from their sockets!
@todayigrewup
2 жыл бұрын
Hahaha 🤣
@nastydrama
2 жыл бұрын
It's better than Disney Store Buzz, I mean, Disney Store Buzz's face is so bad🤣
@todayigrewup
2 жыл бұрын
True that’s even worse
@nicholascampbell08
2 жыл бұрын
This was a great attempt. Enjoyed the video! 😊
@todayigrewup
2 жыл бұрын
Thanks for watching partner 🤠
@tstdystopmotions
2 жыл бұрын
Aw man, this would be so cool! Great attempt though!
@todayigrewup
2 жыл бұрын
I’ll try again later
@papermadhatter5
4 ай бұрын
Hey! just a thought, what if we could just get the helmet to go back with a 45 degree angle of it remaining? rather than going entirely back into the body, what if the two pieces could just MOSTLY go back into there?
@jazzimel
2 жыл бұрын
I saw one of those cheap Buzz's at Walmart recently and I was SO pissed he didn't have a working laser! My Buzz had a laser, all the electronic Buzz's that ever were had a laser! I was outraged!
@todayigrewup
2 жыл бұрын
Yeah they are really badly made and super cheap!
@Someone-vn3vt
2 жыл бұрын
I've waited so long for this maybe like 2 years for this
@todayigrewup
2 жыл бұрын
Yes but sorry I wasn’t able to make it possible. I tried though! 🤠
@Someone-vn3vt
2 жыл бұрын
@@todayigrewup it was worth a shot though
@Swift_Vortex
2 жыл бұрын
And congrats on 95k subs your almost there
@todayigrewup
2 жыл бұрын
Thank you so much partner that means a lot
@analynrosell1739
2 жыл бұрын
I dont know how toy companies can do that feature
@todayigrewup
2 жыл бұрын
Yeah it’s gonna be hard to figure out that’s for sure
@Crystalll_0729
3 ай бұрын
We need a part 2 to this, as I have a rough idea of how this could work with pop out wings, with the actual wing button being on the jet pack like the Toy Story and beyond buzz, and the helmet could have a latch in between both pieces to catch them and pull them both in and out
@Crystalll_0729
3 ай бұрын
Also could have a rechargeable lithium battery instead of a large battery pack to make room for the helmet cavity, with all the wires being attached tightly to the inner walls of the figure
@Crystalll_0729
3 ай бұрын
Shouldn’t affect articulation too much
@Crystalll_0729
3 ай бұрын
Sorry I just really want a fully retractable helmet
@spacetubertoyvideos940
2 жыл бұрын
Hey today I grew up garret darkstar made a fantastic buzz light year replica 😊
@todayigrewup
2 жыл бұрын
I saw it! I love it. We have worked together before on a project for Lightyear. Here is that collab video: kzitem.info/news/bejne/zaquwG2ebGOriJw
@bennyfisher9157
2 жыл бұрын
A fully retractable helmet could be possible if the other features like the pop-up wings, karate chop action worked wirelessly.
@todayigrewup
2 жыл бұрын
I wish one day
@Swift_Vortex
2 жыл бұрын
That's cool I have almost wanted you to try this out
@todayigrewup
2 жыл бұрын
Yeah many fans did so I had to at least try it
@CrispyA113
Жыл бұрын
I’m working on my own custom buzz lightyear and I’m attempting this mod and I’m trying to use drill bit exacto knife and gator grips needle nose plyers of all things I’m modifying it to the fullest extent I’m making some adjustments to the battery compartment drill bitting the molded screwholes which I think you should do
@todayigrewup
Жыл бұрын
That’s awesome. I have an update for that soon I’ll share this summer
@CrispyA113
Жыл бұрын
Oh boy I can’t wait
@CrispyA113
Жыл бұрын
What happened to that buzz after you destroyed it do you still have it or sold it or threw it away
@CrispyA113
Жыл бұрын
I think buzz has to be a tad more fat for this to work
@CrispyA113
Жыл бұрын
Is he really that fat? Yes he is
@Gamerandtoylife90
2 жыл бұрын
THANK YOU YOU ARE THE BEST
@todayigrewup
2 жыл бұрын
You are too! Thanks partner I appreciate that 🤠
@anthonysandoval5512
2 жыл бұрын
If I can't have one with a fully retractable helmet the next best thing for me would be one with the helmet being one nice steamlined solid piece thats you could remove so you could also display buzz completely helmetless
@todayigrewup
2 жыл бұрын
That makes sense!
@palmer_dudum
2 жыл бұрын
Buzz surely got designed before the first Toy Story movie was "realistic", since the only toys that are impossible to be made accurately in real life are Buzz and Tin toy
@todayigrewup
2 жыл бұрын
Not too impossible cosmetically but functionally yea super hard
@Dylanhawkins2457
2 жыл бұрын
I hear there's a carnival in town let's go check it out: thanks buzz.
@todayigrewup
2 жыл бұрын
😂😂😂
@BuzzLightbulb
2 жыл бұрын
You need a movie accurate Andy’s toy box
@todayigrewup
2 жыл бұрын
One day
@SpectacularKorin
2 жыл бұрын
haven't even started watching the video and I'm already excited bet it's a pretty good job!
@todayigrewup
2 жыл бұрын
I tried my best
@therealCrazyJake
2 жыл бұрын
I think there would have to be an open space surrounding the electronics (basically, no wiring in the back or bottom of Buzz’s chest cavity). With the right spacial reasoning, and a false back that fits within the helmet, I don’t believe it would be impossible for toy companies to do that.
@todayigrewup
2 жыл бұрын
Yeah it would be super expensive to design
@therealCrazyJake
2 жыл бұрын
@@todayigrewup for a toy company, not necessarily. For an independent custom, absolutely!
@user-dx8nl9qm9d
7 ай бұрын
I think the solution lies in very small electronics on that part and a two part flexible helmet
@todayigrewup
7 ай бұрын
Hmmm 🤔
@peterglass8657
2 жыл бұрын
I hope you get the helmet thing addressed as soon as possible.
@todayigrewup
2 жыл бұрын
I’ve been trying for 3 years.. Nothing yet.. back to the drawing board.
@anthonyaddison2383
2 жыл бұрын
At least you tried.
@todayigrewup
2 жыл бұрын
Yes never give up
@mothyrichardmothy9242
2 жыл бұрын
I think it could be possible to have a fully retractable helmet in one piece with the voicebox in the chest, but I don't think you could connect the wing button to the back (and no way there could be a karate chop action)
@todayigrewup
2 жыл бұрын
Yeah I can see that happening in the future
@Ardude641
2 жыл бұрын
Great attempt partner 🤠 🚀
@todayigrewup
2 жыл бұрын
Thanks partner
@CenturyGuard
2 жыл бұрын
They said it couldn't be done you wizard
@CenturyGuard
2 жыл бұрын
And it can't with the voice box just keep trying we don't care if he has a voice box or not just as long as it fully retracts that would be super coolkzitem.info/rock/UppMjh34TMBcFYqVXjmGcA
@todayigrewup
2 жыл бұрын
I always gotta try!
@CenturyGuard
2 жыл бұрын
I always thought you were cool so I decided I like Toy Story and I saw that people are making Toy Story in real life and they entirely skipped Toy Story 2 which was my favorite movie of them so what am I doing I'm making it in real life if you want to know anymore about it just I have made videos like this one I'll send you the link below this one
@CenturyGuard
2 жыл бұрын
kzitem.info/news/bejne/rox-2J15iXtzdoo
@CenturyGuard
2 жыл бұрын
Respect for responding to new comments on relatively old videos
@jjpollolandia496
2 жыл бұрын
yaaaaas finally :D imma see what happens well, it was maybe a fail, you lost the battle, but never the war!
@todayigrewup
2 жыл бұрын
I tried but I’ll never give up 🤠
@splashdash8513
2 жыл бұрын
If you could please provide me the next video maybe you can look at a disney store buzz to see how they did that
@todayigrewup
2 жыл бұрын
Disney store buzz is not fully retractable so it doesn’t help
@BuzzLightbulb
2 жыл бұрын
Send a buzz to Ranger customs he might be able to do it!
@todayigrewup
2 жыл бұрын
I’ll ask him
@HackerBilly13
2 жыл бұрын
You should invest in grabbing a dremel. It would save you so much work and do a much cleaner job of cutting.
@todayigrewup
2 жыл бұрын
I’ll def do that thanks for the suggestion
@HackerBilly13
2 жыл бұрын
@@todayigrewup No problem! They help out a lot. If you check out my channel. I used a dremel for the Utility Belt waist swap on a disney store buzz and to make the laser point straight out of buzz's wrist like in the movie. They're really really helpful
@JamestheParodyMaker7446
2 жыл бұрын
This is really cool
@todayigrewup
2 жыл бұрын
Thanks for watching partner 🤠
@TheChococoa
2 жыл бұрын
Today I grew up how bout you put a piece on the inside and make the helmet on piace and when you take it down it hits the piece so it can go anywhere
@todayigrewup
2 жыл бұрын
I’ll try but it didn’t work for me when I tired that either
@TheChococoa
2 жыл бұрын
@@todayigrewup il try
@TheChococoa
2 жыл бұрын
Didn't work
@TheSimpsonsPlushShow
Жыл бұрын
I think it is impossible, TOY STORY BREAKS REALITY!
@todayigrewup
Жыл бұрын
Haha 😂
@SomethingTrooper
2 жыл бұрын
One day we will get the fully retractable helmet. Also TodayIGrewUP maybe the guy who made the toy story 3 buzz can do this.
@todayigrewup
2 жыл бұрын
True you never know!
@pulpproductions2000
Жыл бұрын
Was anyone else disturbed when he took his back off and you can see Buzz’s insides?
@Luc92918
2 жыл бұрын
Good attempt but if they made a buzz that's like really really fat it won't be movie accurate scale but they can fit the helmet and karate chop and wing s and a voice box
@todayigrewup
2 жыл бұрын
Yeah it’s hard but not impossible I’m just not able to accomplish this on my own
@CrispyA113
Жыл бұрын
I might happen to like that buzz’s body better than signature’s because it only takes two batteries and I think that’s movie accurate maybe you can find another one and do a back half of a body transplant with Your Ranger customs Buzz and maybe get Him to do it again
@keyshawnwatkins4362
2 жыл бұрын
I definitely think it’s possible, but that would require adjusting the wiring, circuits, and voice box so that they don’t get in the way of the helmet. Maybe use a thin, flexible plastic that can maintain its shape, and won’t get in the way of the electronics. Still, good try. Maybe, in the future, we can get it done.
@todayigrewup
2 жыл бұрын
Yeah more engineering is needed here
@nindooongpark
2 күн бұрын
Bros the irl sid
@DavidKozakiewicz
Жыл бұрын
A fully retractable buzz lightyear helmet is impossible.😔 at least you tried your best.🙂
@ns1official
2 жыл бұрын
Yep. Need that headsculpt. Much better than the collection Buzz. Great Buzz but looks like a stoner
@todayigrewup
2 жыл бұрын
Haha funny but I agree
@arabasimpson7530
Жыл бұрын
How to make it super glue both helmet pieces together
@analynrosell1739
2 жыл бұрын
This was a great attemp 😊
@todayigrewup
2 жыл бұрын
It doesn’t hurt to try 🤠
@calvinmusquez9162
2 жыл бұрын
A system for this would need to be designed from the ground up and you would likely need to sacrifice other features.
@todayigrewup
2 жыл бұрын
Yes definitely
@sorcerermickeyfanguy6271
2 жыл бұрын
i love your videos
@todayigrewup
2 жыл бұрын
Thank you for watching and for all the support partner I really appreciate it 🤠
@alijaberpro
2 жыл бұрын
todayigrowup I finally straet Buzz wings
@todayigrewup
2 жыл бұрын
Wow cool
@GoliathAngelus
2 жыл бұрын
Can you buy the original Toystory cloud wallpaper in the US? I found out that we can in the Netherlands
@todayigrewup
2 жыл бұрын
I haven’t found it in USA
@GoliathAngelus
2 жыл бұрын
@@todayigrewup if you are interested I can maybe send you a role
@woodysroundup8311
2 жыл бұрын
I tried it out on a Disney store buzz and it worked you just need a few extra pieces from some other Disney store buzz’s But it is possible to make one workingBecause I made it happen
@todayigrewup
2 жыл бұрын
Interesting. Can you make a video about it?
@woodysroundup8311
2 жыл бұрын
@@todayigrewup I could try to
@woodysroundup8311
2 жыл бұрын
@@todayigrewup And by the way I kinda did like your method but little different but it doesn’t have like any electronics in it yet but that’s what my goal is to do in the future
@woodysroundup8311
2 жыл бұрын
@@todayigrewup Now I can’t do a video because the mechanism broke and I don’t have a replacement part for it
@hirohiroarikawa6806
Жыл бұрын
His helmet has a bit showing in the movies so it should be fine
@johnnyel182
2 жыл бұрын
Maybe you can brain storm with littlegreenalien like a collaboration
@todayigrewup
2 жыл бұрын
Maybe one day 🤠
@CrispyA113
Жыл бұрын
What I would probably do is If you or I can find a rare expensive Toy Story 3 era buzz that has karate chop action with a push a button I would do a back half transplant over to a collection buzz but it has to be a glossy finish and the right size
@sorcerermickeyfanguy6271
2 жыл бұрын
I am sad that the voice box wire is broken, but anyways good attempt.
@todayigrewup
2 жыл бұрын
Yeah it couldn’t be fixed this time.
@supermarioglich7645
2 жыл бұрын
I know how you can make the Divine child voice box stringer longer
@todayigrewup
2 жыл бұрын
Yeah that’s cool partner
@This_account_no_longer_exists
2 жыл бұрын
Hope it works just started watching
@BuzzLightbulb
2 жыл бұрын
Same here
@todayigrewup
2 жыл бұрын
Sorry it didn’t work I tried 🥲
@This_account_no_longer_exists
2 жыл бұрын
You probably need the inside to have more room and it should be hollow
@claudiaagurcia3049
2 жыл бұрын
Hey thats good
@todayigrewup
2 жыл бұрын
Thanks partner 🤠
@johnkoester7795
2 жыл бұрын
We couldn’t make a little motor and put it through the plastic holes in the helmet
@todayigrewup
2 жыл бұрын
Not sure but sounds expensive to engineer
@mr.diznoid1955
2 жыл бұрын
This is so cool !!
@todayigrewup
2 жыл бұрын
I tried!
@mr.diznoid1955
2 жыл бұрын
Lol
@jjpollolandia496
2 жыл бұрын
todayigrewup, i got a mod idea, what if you try making the utility belt for your movie accurate buzz, a detachable one, that'd be cool
@todayigrewup
2 жыл бұрын
Ranger customs did that before here: kzitem.info/news/bejne/lqyZsKF5hqZ9jXo
@giorin
2 жыл бұрын
Why they make buzz cant open His helmet full???
@todayigrewup
2 жыл бұрын
Because it seems impossible with the electronics. Maybe it’s not possible yet. In real life it’s harder to do this, on the movie it’s easy because it’s a fake animation and not real life.
@johnnyel182
2 жыл бұрын
Nice custom
@todayigrewup
2 жыл бұрын
Thanks I appreciate that
@toyirl5172
2 жыл бұрын
Wow! Great!
@todayigrewup
2 жыл бұрын
Thanks partner 🤠
@toyreviewer1662
2 жыл бұрын
You could've just unscrewed buzz,and just remove the helmet completely...
@todayigrewup
2 жыл бұрын
I tried.. I failed lol
@cross_t122
2 жыл бұрын
NO WAY DUDE
@todayigrewup
2 жыл бұрын
Yes way I tried but I failed lol
@redbonnie-s9t
2 жыл бұрын
Well tell someone who do blue printers on he's body and make full space
@todayigrewup
2 жыл бұрын
Yeah maybe one day
@Toystory4ever
2 жыл бұрын
If only you could keep the wires in
@todayigrewup
2 жыл бұрын
Yeah no room for it..
@obsessivefanboy7
2 жыл бұрын
Just comes to show how unrealistic the movie Buzz really was
@todayigrewup
2 жыл бұрын
Yes true
@cmsstudio1093
2 жыл бұрын
😎 Cool!
@todayigrewup
2 жыл бұрын
Thanks for watching partner 🤠
@cmsstudio1093
2 жыл бұрын
@@todayigrewup No problem 😌
@jelv1078
2 жыл бұрын
Oye puedes hacer un tutorial de cómo quitarle el casco a buzz pero sin desarmarlo porque los tornillos del mío ya se barrieron y no sé si sé puede quitar de otra forma si puedes podrías hacer un vídeo? Por favor 🙏😓
@todayigrewup
2 жыл бұрын
lo siento no se como hacer eso sin desarmarlo
@jelv1078
2 жыл бұрын
@@todayigrewup NO TE PREOCUPES GRACIAS POR CONTESTARME ❤️🙏
@dutchchann9317
Жыл бұрын
Maybe Toy Story is just a cartoon and they made his helmet just a joke
@ryukshinigami3254
Жыл бұрын
Can I have one of your buzz please?? Every price
@greenhairdummydoll5886
2 жыл бұрын
In the toy story world the toys are very very big they just look small it’s possible white a 2009 robot buzz but they don’t sell that no more😕
@todayigrewup
2 жыл бұрын
Yeah interesting. I think Buzz as 12 inch scale is movie accurate.
@Otrocanaldeideas
2 жыл бұрын
Este man y sus incongruencias.....
@todayigrewup
2 жыл бұрын
se llama entretenimiento. Hago lo que los fans me piden. querían ver esto, así que lo hice para ellos
@Otrocanaldeideas
2 жыл бұрын
@@todayigrewup me refería a que eres loco de los juguetes 😐
@TravTrevTV
2 жыл бұрын
FINALLY
@todayigrewup
2 жыл бұрын
It was worth a shot
@CrispyA113
Жыл бұрын
Do you have any spare parts from that buzz like a helmet legs or arms that you can sell them in your shop? I’m an autistic person who loves toy story in need
@CrispyA113
Жыл бұрын
Please tell you have spare parts left over from this buzz
@itsfrancis3124
2 жыл бұрын
Niceee
@todayigrewup
2 жыл бұрын
Thanks partner 🤠
@CrispyA113
Жыл бұрын
Too bad but hey dude you tried
@todayigrewup
Жыл бұрын
Yes it’s super hard to mod Buzz
@MS7000_
2 жыл бұрын
Cool 😎
@todayigrewup
2 жыл бұрын
Thanks for watching partner 🤠
@EliRetroVHS642
2 ай бұрын
It's impossible
@thomasplouffe1363
2 жыл бұрын
well with the new piece of garbage buzz lightyears yes but with the ones with actual joints it may be too hard
@todayigrewup
2 жыл бұрын
I agree sadly that’s true
@MrDynamiteCD
2 жыл бұрын
My idea is: connect a screw between the two parts of the helmet so when a helmet reaches its limit inside the body, the other one would still continue going inside the body, I will try to make a photo and send it to you on insta
@todayigrewup
2 жыл бұрын
Cool because I need help
@dvlopergrannyfans2018
2 жыл бұрын
You try friend you super try
@todayigrewup
2 жыл бұрын
I do my best
@dvlopergrannyfans2018
2 жыл бұрын
Well that not good enough
@CrispyA113
6 ай бұрын
Buzz has to be a tad fatter for everything to work luckily I have a my 3D scanner My Disney Store Buzz And Collection Buzz parts chest and Back
Пікірлер: 220