That’s amazing! I’ve been looking for a video describing the process and this did just that. The detail you went into was awesome and you have no idea how much I appreciate this!
@backyardbowties
Жыл бұрын
This is exactly what I needed. Thank you so much for the detailed run down
@johngarcon87
9 ай бұрын
I'm currently following your instructions and welding it up tomorrow. Thank you!
@thegoodshepherd2524
Жыл бұрын
Thank you so much for the video walk through. Seats look awesome!
@angelesautomotive
Жыл бұрын
Thanks!
@krisyaz1545
2 жыл бұрын
Great video.. thanks for the details and putting all the right info in.
@PCTVComfortVision
27 күн бұрын
Top quality video here, man
@RR-mz9zu
2 жыл бұрын
Thanks bro for this video . Putting my millermatic to use for my 73’
@clarin3318
Жыл бұрын
Looks clean
@TheVideopreneur
3 жыл бұрын
I had the link for the old video and it no longer worked. Then I found that you reloaded it last month. Getting ready to put this conversion in my 1961 C10. Thanks for reloading. Great Video!
@angelesautomotive
3 жыл бұрын
Yea my son accidentally deleted the old video, so i had to upload it again
@TheVideopreneur
3 жыл бұрын
@@angelesautomotive Thanks for doing so. It is a fantastic video!
@marioluna8026
Жыл бұрын
Super helpful video!
@robertochavez8383
2 ай бұрын
AMAZING🔥 Thank you sir
@kurtissawatzky4689
Жыл бұрын
Just picked up a crew cab seat from a 2010 Sierra for my k10 and happened to stumble across this video. Should help👍🏼
@mariodiamonte8531
Жыл бұрын
I did this seat swap following your video, everything works as you said and showed. The seats are narrower and I hugged the driver side when aligning to keep the steering wheel as centered as possible, although not perfect its good enough. Thanks for the video.
@angelesautomotive
Жыл бұрын
Glad it helped
@Firedowg999
10 ай бұрын
How do you like it after sometime now with it installed? Does the bucket center with the wheel?
@felonebike9859
2 ай бұрын
Great idea
@martinolivas319
Жыл бұрын
Great job and very informative. I’m going to try and install some Chrysler 300S seats in my 76C10 and hopefully mine will come out as nice as yours. Any tips or advice for my build would be appreciated
@barrylipham
11 ай бұрын
Well done
@arthurramirez5305
6 ай бұрын
Thank you for ur video. I'm A big guy. I'm gonna do the same thing and Also for A little more clearance I'm gonna get a shorter steering column as well. That should be perfect room for me when I'm done
@scottdoerksen1347
11 ай бұрын
Love the video! Looking to do this in a 65’ with a gas tank in the cab. Not sure if you have done this with a gas tank in the cab , but wondering if you think it would still fit ? Thanks
@fishenbyfaithoutdoors2589
2 ай бұрын
Thanks for the info.
@NikolichR
3 жыл бұрын
I flipping love this video! Thank you for putting it together. Question, the black plastic clips that you describe at approx 1:52sec. Is there a way you can re attach them to finish covering the brackets when finished?
@angelesautomotive
3 жыл бұрын
The plastics cover the seat mounting brackets that get removed, you would have to cut the plastics and fab up some new slotted mounts for them to clip into
@Firedowg999
10 ай бұрын
With the newer seat being narrow, doest it still fall inline with the wheel? Or is the bucket off a bit?
@trashpandasofalabama9196
3 жыл бұрын
Is the crewcab seat much different than a Tahoe seat besides the Tahoe bottoms folding forward? I have one from a 17 Tahoe.
@NDB390
7 ай бұрын
Looking at doing this. Is it actually comfortable being the back seat? And does it make it a little weird as it is more narrow as far as reaching for the door handle or window crank?
@benschoones9213
Жыл бұрын
Does this not put a lot of strain at the “front passenger” side of the middle seat? Seeing as it’s only connected at the back does it not sag?
@Dads86C10
4 ай бұрын
Is the seat rail aluminum or stainless? You think I can oxy acetylene weld it?
@brandonyoung4299
2 жыл бұрын
Hey i just purchased front seats out of a 2016 Silverado and im wanting to put them in my 84 chevy i wasn't aware of putting the rear seats in it is that a big no or would it work just fine? Also is there a way a person could keep them electric in a square body? Also this is one of the best seat swap videos ive watched detailed and you make it look easy thanks for the video
@angelesautomotive
2 жыл бұрын
Ive been wanting to install some from seats myself but havent had the chance to do it, im sure it can be done with some modifications
@flj232
12 күн бұрын
If I cut the top pieces at 1”, I get about a 3.5” opening on bottom
@lannyfloyd6131
2 жыл бұрын
What did you do with the black seat that was in the truck at the front of the video?
@SuperSamsung123456
2 ай бұрын
Question with the new seats is there any problems with the seat belt buckles?
@LeanedBackLotto
4 ай бұрын
You make these to sell? That's pretty awesome man
@robertmarshall7476
2 жыл бұрын
You should do the front high country seats in the c10
@mlwchevy
2 жыл бұрын
I have done that and they work for me because I am a small person but for anybody with a little height or a little bit of a gut they are way too big. Lol
@sergeantscumbag2116
Жыл бұрын
are they comfortable? like something you could drive for a couple hours ?
@bombaman202
3 ай бұрын
How did you get the seat cover to fit over the upper tabs @ 6:48 ? Thanks
@michaelrawlinson1876
2 жыл бұрын
I have bucket seat rails attached to the original seat bracket. Can it still work?
@loosescrewdrew
10 ай бұрын
Same process probably for 67-72 huh? Gonna do this soon
@islandlife9127
Жыл бұрын
Awesome video. Seat look good. Does the seat being more narrow than the original one effect the steering wheel from being centered?
@angelesautomotive
Жыл бұрын
Nah not really, its just an inch and a half shorter on each side, im still centered behind the wheel
@islandlife9127
Жыл бұрын
OK awesome, thanks.
@mr.troyediger2650
3 жыл бұрын
Well explained, good camera work. How much higher do you sit than stock bench? (at 6'8", I don't want to sit much higher in my '81)
@angelesautomotive
3 жыл бұрын
Mine sits lower than the stock bench seat, you can adjust the permanent height of the seat bottom depending on where you decide to weld the seat rail mounts to the seat frame
@mr.troyediger2650
3 жыл бұрын
@@angelesautomotive Thanks for the quick reply!
@dartravensshelley6990
Ай бұрын
I WANT THIS IN MY C1500
@ejvelarde6129
3 жыл бұрын
Does this move the steering wheel to the driver alignment any?
@timruiz8014
9 ай бұрын
Do the back of the seat lock in place?
@leogurrola91
2 жыл бұрын
I wonder if this works with 2010 Tahoe 2nd row seats.
@josephrodriguez4029
Жыл бұрын
Have you installed a seat like this into a 67-72 C10?
@Frma-ro7sh
11 ай бұрын
How’s the space on the sides do you lose a lot of crap
@darylbrown3648
2 жыл бұрын
Thank you, amazing info! How do the seat belts line up? I am in the middle of my seat swap and I need to replace my stock belts as they don't retract anymore and are now the wrong color. I see some good universal retro offerings from places like Jegs. I also see retro euro belts that have the red push button and look more the belts that would go with the newer seats. I really need to install some new belts with my 2015 seat swap!
@angelesautomotive
2 жыл бұрын
I ordered some tan seat belts from LMC Truck, used the stock locations. Ill have to make an updated video on seatbelts for it
@gonzolsx8752
2 жыл бұрын
Awesome, have you done it on an chevy obs?
@angelesautomotive
2 жыл бұрын
Nope
@andrewpate9157
3 жыл бұрын
This looks awesome and I think I would try it but in the video it looks like there is a good size gap between the seat and the door. I know you said the seats were smaller than factory seat is but is that gap really noticeable? I don’t want to do all that work and be sitting on the edge of the seat just to be square with the steering wheel. Thanks for any feedback man good job
@angelesautomotive
3 жыл бұрын
Id suggest marking your original bench seat with some masking tape, 1.5 inches off each side and that should give you a visual of where the seat will be in relation with the door panel, i dont notice it at all
@andrewpate9157
3 жыл бұрын
@@angelesautomotive that makes since, good idea I’ve see what it looks like. Thank you
@bryancastaneda4433
4 ай бұрын
Would you do this for a 90s obs chevy single cab
@unbludictable
2 жыл бұрын
Did you do anything to brace the seat along the front as you did in welding the back?
@angelesautomotive
2 жыл бұрын
No, just boxed in and welded the back of the seat frames together, makes it rigid enough, wouldnt be able to install the seat material and foam if you weld the front of the seat frames together
@kourtneyprobst6339
22 күн бұрын
Have you done this in a ‘64 c10?
@kevinfranklin4335
2 жыл бұрын
Would you be interested in pre-modding a seat and selling [with some profit built in for yourself of course!] ?
@TheMarauder00
2 жыл бұрын
I like to remove the head rest. It gives is a more stock appearance. I don't like seeing them in the back window. Nice video 👍
@lelopimp1091
Жыл бұрын
I agree
@skywalkerMC
2 жыл бұрын
There is a 73-80 seat in my 87 and the seat back doesn’t go all the way to the back of the cab. Does this conversion touch or come close to touching the back of the cab at the top of the seat? I’m 6’6” so I need all the space I can get.
@angelesautomotive
2 жыл бұрын
Yes, the top of the backseat touches the back of cab
@leontan7288
2 жыл бұрын
Where did u weld the 1 inch metal to connect the 2?
@angelesautomotive
2 жыл бұрын
At 5:28 in the video it shows what part of the bracket to weld a 1" wide spacer to connect the seat rails together
@leontan7288
3 жыл бұрын
What portion of the brackets did you cut off?
@angelesautomotive
3 жыл бұрын
At 2:15 in the video tells you what bracket to cut off, they are the seat mounting brackets that are not used, also have to trim some of the c10 slide rail brackets
@jeremyperez406
2 жыл бұрын
Any pics of how you did the seat belts?
@angelesautomotive
2 жыл бұрын
I bought new seat belts from LMC installed in the factory locations
@jon7154
2 жыл бұрын
Interested in building and shipping a seat?
@keithbrooks7956
2 жыл бұрын
Hey I was wondering could I pay you to fab a seat like yours for me just let me know thanks
@zeadaddy9671
3 жыл бұрын
Do you think I could do this but on my 95 single cab?
@angelesautomotive
3 жыл бұрын
Depends on how the seats mount to the cab, but im sure you can fab up a mount to make it fit
@6.liter-beater
3 ай бұрын
How did you keep the seat back from folding down did you weld them up my seat back flops there's nothing to lock it
@phillipa7595
2 ай бұрын
You ever figure this out? Debating on doing this swap soon.
@6.liter-beater
2 ай бұрын
@phillipa7595 once you build that center bracket like he shows the seats won't fold anymore! They're bolted to that bracket from the factory so once you box it in they don't move! I did mine 2 weekends ago and I love it
@towingservice29
3 жыл бұрын
Interested in selling that black seat
@deesanchez5933
Жыл бұрын
How much would you charge to do mine for me?
@tobysquared
Жыл бұрын
Where you located? And do you do this for people?
@tobysquared
Жыл бұрын
Ever think about making custom kits/brackets for this?
@angelesautomotive
Жыл бұрын
Im in SW kansas, yea ive made a few for others in my area
@mlwchevy
2 жыл бұрын
Is this the same for 07-13 rear seats. Are they any different.
@angelesautomotive
2 жыл бұрын
07-13 seats are different
@mlwchevy
2 жыл бұрын
Will it still work with a couple modifications I already bought the seat unfortunately
@angelesautomotive
2 жыл бұрын
Yea i have a friend that used one of those seats in his, he had to shim it up alot more in the front so that it would lean back more
@mlwchevy
2 жыл бұрын
@@angelesautomotive thank you so much ill let you know how it turns out.
@OldGuy54
10 ай бұрын
Where are you? Would you be willing to build one of these for me? I’d just send to the frames and pay shipping back
@antoniocuyler
Жыл бұрын
Do you have a shop
@angelesautomotive
Жыл бұрын
Im in the process of having a shop built, do work out of my garage for now
Пікірлер: 101