I feel like this is how’s it’s meant to be done, but none of the companies have bothered to tell us. And this guy was the first to realize it! Thanks for the video, I knew there had to be a better way to get this thing to fit better👍👍
@jimhuman7366
Жыл бұрын
Awesome! Thanks for making this look less intimidating! I always thought the coverlay was crap because it didn't fit! Now I know, its just because it wasn't installed right. Great work!
@dirtykustomz
Жыл бұрын
Appreciate you taking time to watch my vid, it’s really easy this way.
@JustinWray-vs3zo
Ай бұрын
Thank you thank you thank you I was about to just order a new dash $$ because I was so upset with the fit but now I know to take these steps. Thanks!
@dirtykustomz
Ай бұрын
You’re very welcome . I am happy you found it useful been there in your shoe lol . Good luck with the build .
@RecoveryRoomRestorations
24 күн бұрын
I used a Coverlay and was not really happy...now, Im gonna do it over, plus my duallys, too
@LaughingCattFishing
5 ай бұрын
I am glad that i found your channel. The way you are doing this dash repair makes a ton of sense. Thank you for sharing your knowledge.
@dirtykustomz
23 күн бұрын
Hope you had success with your projects
@dirtykustomz
23 күн бұрын
Hope you had success with your projects
@BrookeAlysha
2 жыл бұрын
Thanks for all the easy tips!
@Eastern67
9 ай бұрын
I watched it in perfect time, before I start working on my dash. Thanks for sharing it.
@stevenm3141
Жыл бұрын
Finally, the first person to actually do the right thing! I wish I give you more than one star!Filling a dash with Bondo is not a repair! This is the correct way to do the job!
@dirtykustomz
Жыл бұрын
Appreciate that..
@jraposo911
Жыл бұрын
Good stuff!Never thought that would peel off so easy
@dirtykustomz
Жыл бұрын
When they get brittle they come easy ..
@thetotlpkg
6 ай бұрын
Will you show the follow up video? This is great content.
@romangarza7561
Жыл бұрын
Where’s the update showing the finished project? Looks badass bro. I’ve got several I need to do this way now.
@nicklehman3984
2 жыл бұрын
Sent here by a post on Squarebody Nation. Subbed
@The_Nameless_Entity
Жыл бұрын
Dude. This was the video Ive been searching for because my dash is FUBAR! Didnt feel like spending money on a complete dash pad. Awesome bro. Thanks.
@dirtykustomz
Жыл бұрын
Happy you found it helpful
@leighbratcher1998
4 ай бұрын
Very good demonstration, the only way to put the cap on.
@bloodstone6196
Жыл бұрын
Very nice,looks way better than just throwing it on!
@dirtykustomz
Жыл бұрын
Thanks appreciate that this the only way to do it right.
@PrimeG2
4 ай бұрын
I did the same to mine. You can even modify the cap, trim holes for other things if you like. But there's really no need to re-do the old dashboard. Unless you want something nice and fancy. The coverlay works perfect. I even painted mine.
@jamsiss
2 ай бұрын
How'd the painting go ? .. what did you use please
@dnaparkour1
Жыл бұрын
Would love the link to the dash cover and to see the finished product. Either way, I'm doing this to my dash soon!! Thanks for showing us how.
@leesantos9711
Жыл бұрын
Glad you made this video , i definitely will try it !
@dirtykustomz
Жыл бұрын
I going to make a new one soon start to complete just waiting on the cap . Thanks for watching.
@lawrencejohnson4597
Жыл бұрын
Man thanks so much for this video 💪🏾
@dirtykustomz
Жыл бұрын
Thanks bro, hope you get it done just take your time that’s the key ..
@philipmichael5136
Жыл бұрын
Looks cute
@Thunder-xo1cx
4 ай бұрын
Nice I admire you're patience I would be really tempted to use a wire wheel on a grinder to take the old stuff off Well done
@dirtykustomz
4 ай бұрын
Thank you , lol it really takes time they it right ..
@here_to_watch2115
11 ай бұрын
Thisnis perfect for smoothing a dash also.
@marioflores9450
2 жыл бұрын
So how did It look all finished?
@tonyanthony7307
8 ай бұрын
Thank you for inpowering me to have a go❤
@dirtykustomz
8 ай бұрын
You can do it just take your time.
@lawedtenn
Жыл бұрын
Great Vid, thanks. My Dash is pretty bad. I'm going to attempt removing the cracked vinyl the way you suggest.
@dirtykustomz
Жыл бұрын
Did it work?
@mcfero1
4 күн бұрын
So no follow up video to show it’s held up and everything ?
@johnbaumgartner7731
8 ай бұрын
Great video! I do wish however that you would have shown the finished product as well as it being installed in the truck. I watched other videos with the coverlay prduct where the coverlay was installed off the truck and it wouldn't fit. Perhaps your method would have prevented that but it would have been nice to see. Thanks again ffor a great video.
@dirtykustomz
8 ай бұрын
Ok I will do a video with it on one of my trucks stay tuned .
@anthnmnt
6 ай бұрын
Any luck getting this video with the dash installed?
@dirtykustomz
5 ай бұрын
@@anthnmnt I will get it done for you very soon
@thabigghomie_
Жыл бұрын
🔥💪🏾
@jacobcarter9189
8 ай бұрын
thanks for the helpfull video bro
@dirtykustomz
8 ай бұрын
Thanks for watching my video
@oldfart8501
Жыл бұрын
Thanks man, I did not want pay $500 bucks for a reproduction dash which I know probably wouldn't have fit right like everything I ever ordered for my old silverado
@dirtykustomz
Жыл бұрын
Happy you found the video helpful.
@rickybenivamonde3880
Жыл бұрын
If you go as far as to take off the dash. Spend the money and get the reproduction dash. Just makes more sense
@texican40
3 ай бұрын
Where is the best place to purchase that cover?
@dirtykustomz
3 ай бұрын
Online rock auto .
@Bhartrampf
Жыл бұрын
What is the best way to replace the foam that is destroyed that goes under it?
@dirtykustomz
Жыл бұрын
Depending how bad it is you can another part of a old dash and graft it in or go to Home Depot if you got one close by you , get the spray foam and cut it down . Hope this helps .
@Bhartrampf
Жыл бұрын
@@dirtykustomz I was.hoping the spray foam would work, thanks, I'll give that a try
@jessicascott137
Жыл бұрын
Do you put something on top of the foam to help it to stick to the coverlay?
@Bhartrampf
Жыл бұрын
@@jessicascott137 I believe the kit comes with glue, I haven't ordered mine yet.
@dirtykustomz
Жыл бұрын
@@jessicascott137 you can use clear silicone or spay on glue in the can ,
@jaimesanchez9207
8 ай бұрын
Where can I buy a ready dash cover?
@dirtykustomz
5 ай бұрын
Rock auto
@merlepatterson
Жыл бұрын
Do you have a link to order the dash replacement skin?
@dirtykustomz
Жыл бұрын
LMC has them, sometimes I find them on Amazon, eBay, Rock auto I buy them whenever I find them cheap..
@merlepatterson
Жыл бұрын
@@dirtykustomz Thanks
@jaycee6639
9 ай бұрын
Just saved me 600 bucks
@dirtykustomz
9 ай бұрын
Send some my way lol , I am happy you found it useful.
@BillyRay501
Жыл бұрын
Which mines was this easy I got busted plastic and missing foam
@dirtykustomz
Жыл бұрын
This is the best way to do without busting your budget..
Пікірлер: 67