I was really glad to see you handling the laptop at your last race, the more you know the better you are for the whole team, congratulations Tommy you are doing awesome.
@jcnpresser
Жыл бұрын
Little tip on the cab corners, if you can keep all your body work below that sharp body line, you probably won’t be able to tell you did any thing to it. That’s a perfect line to put your tape line so you don’t have a obvious paint line, you know. Nice job on doing the thing, lol!
@Swamp-Fox
Жыл бұрын
Definitely not boring! The truck is shaping up nice!
@andrewogden4168
Жыл бұрын
I think the headlights look good just update the front badge to match and you’re good to go.
@cobyburrow9339
Жыл бұрын
Tommy, just think that everyTHING you do from now on will be a new learned THING. Neat to see you excited about learning. Good job!
@Bryanja81
Жыл бұрын
Nice work Tommy. FYI, the Hercules drill bits at Harbor Freight work exceptionally well for a lot less money, especially when they put them on sale. Under $20 when I bought a set.
@nigradert
Жыл бұрын
Stay positive. You do provide good entertainment. It's real and raw. Shows the real life to it.
@KarKamp
Жыл бұрын
Before you touch that truck’s wiring you should consider doing 2 things, 1: get a chiltons or haynes manual for the wiring diagrams.. 2: go to the salvage yard and get ya an extra harness or buy another one just in case you have issues because it will happen
@arthurfricchione8119
Жыл бұрын
Tommy thanks for sharing you’ve got a good attitude with the whole process. 😊
@darrelljames8745
Жыл бұрын
I love watching you do ur own work tommy that’s how you learn the trade of mechanic work
@derrickR.
Жыл бұрын
Very nice work Tommy!! Great day when you get a video from OMG and GEN 2! Would be perfect if SRC drops video today!!!
@rayrussell6064
Жыл бұрын
Your doing awesome Tommy take your time and before you know it you'll have a complete truck. God bless and as always be safe.
@jasonbose3507
Жыл бұрын
Hey Tommy, you and your brother are the coolest. Keep kicking butt!!!
@chui19801
5 ай бұрын
My opinion my friend. Leave those led lights in there. It would be nice if they where amber and use them as directionals like I did on my 66 pontiac. As far as the wiring, that will come easy as you solder and solder and solder more and more. Don forget heat shrinks. For looks, you get wiring covers like the ones they sell on ebay or amazon. If you are not matching colors, then stick to black. Good luck brother. Looks good.
@17mfan
Жыл бұрын
I notice you're missing the dash fuse box cover. I've got a blue one if you need it
@lincolnstovall9471
Жыл бұрын
Read the distrucktions. and slap in the crap. I like the four eye truck!!!👍🤙👍🤙 nice mouse trap, kitty.
@quickdeuce
Жыл бұрын
Re installing that master cylinder. ANYTIME ya have to lie on your back, head and arms upside down working under the dash it's a tough project. You and Allison dun good,, the master looks awesome! Good job.
@Roleypoleyolie
Жыл бұрын
In my experience Windage tray is short to clear Fbody oil pans, Longer tray is truck style but I could be wrong.
@thatrebelboy48
Жыл бұрын
Tommy, I just put these in my truck to replace my lights and I highly highly recommend them to anyone whose needing stock replacement style lights. The fitment and quality are the same as oem! 10/10!
@SethBergile
Жыл бұрын
That Dupli-color is good stuff. I used it to touch up my pewter Tahoe and I was shocked by how well it worked. Obviously not perfect but for rockers and cab corners it did pretty well.
@steverathwell2173
Жыл бұрын
I just got an obs... you convinced me to stick with stock lights.. lol
@tracyw8739
Жыл бұрын
Tommy, you should be proud of yourself for the willingness to rebuild your truck primarily by yourself. It will be a good learning experiance.
@kevinjones2667
Жыл бұрын
❤ from pnw oregon. Bro falcon looked good at slug fest. You drove the wheels off that thing.
@mayhemsmaster5050
Жыл бұрын
How would it be possible for you to bore us... unless we are the ones doing the homework? I love to see the progress being made on the truck. The new headlights and halos look awesome on the daily... and would look awesome on the drag truck. 🙏💜
@offthebeatenpath5326
Жыл бұрын
yall need a paint guy next i was just watching the other channels and seeing all the nice motors and wheels and stuff it would be great to see all of the car and trucks painted 🤩
@brandaneakright6082
Жыл бұрын
Your rod needs adjusted for your brake pedal, but I would’ve bench bled the master cylinder before putting it on the truck it’d help you out some. Keep up the good work.
@jamiebruce1597
Жыл бұрын
Good job Tommy and Allison! This is how we learn by doing! This what keeps us watching! Bring all that you can and we’ll watch it!
@jamieround2072
Жыл бұрын
MOST DEFANTLY !!!!!!!!!!!!! U GUY'S MAKE AN AWESOME TEAM KEEP UP THE GREAT WORK BOTH OF YA's !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@jacobstephenson5063
Жыл бұрын
You know the dims are supposed to be on the outside and the brights are on the inside
@RealSteelStreet
Жыл бұрын
100% correct👌🏼
@juddmuterspaw4081
Жыл бұрын
Tommy, you need to shorten the master cylinder rod. My son bought a 66 Galaxy that had a brake pedal like that, it over heated the brakes until I figured out it was keeping constant pressure on the brakes. Shortened the rod so it has a little play and fixed the problem.
@Brandon-rl6fw
Жыл бұрын
Young Thomas your drill and drill bits would appreciate you a lot and last thousands of drilling episodes longer if you’d put the drill in low. Turn them slow as ya can. 💪🏼💪🏼😂😂
@ECC-ec
Жыл бұрын
Yeah, what Brandon said
@anthonyjones657
Жыл бұрын
That's a big negative. You just have to feed to match the speed.
@Brandon-rl6fw
Жыл бұрын
@@anthonyjones657 and common sense ain’t so common anymore obviously 😂😂
@lloyd1344
Жыл бұрын
Variable speed drills were invented for a reason. On many occasions slowing the drill speed down allows the drill bit to cut more efficiently with much less heat. Some of the newer alloys have a tendency to work harden when exposed to the additional heat of high speed drilling. Just an old man thinking out loud. Opinions vary. All are probably correct.
@ernestbell6042
Жыл бұрын
Yep, AMEN brother...
@davidbarr707
Жыл бұрын
I brought some cheap LED bulbs for my OBS GMC. I love those bulbs. Somehow water got in my driver's side headlight housing. It filled halfway up with water and the froze. The bulb never blew. I drilled out a couple of small drain holes in the bottom to drain the water. That was over a year ago. They still work.
@khalood_383
Жыл бұрын
You should use f body pan instead of truck pan, truck pan hangs lower than the k member, don't forget to bleed the master cylinder before hooking the brake lines and adjust the rod for the pedal too, good luck on the project young man.
@cariboomike99
Жыл бұрын
Put on a respirator when your grinding! If it goes in you it stays there. And no rust boogers!
@IDRIVEOLDCARS
Жыл бұрын
Never thought you looked like Billy until those safety glasses scene lol.
@quickdeuce
Жыл бұрын
Tommy,, those headlights look AWESUM in your truck! Put the same in BOTH trucks 😁
@jonathanhanners6057
Жыл бұрын
Glad to see you working on the truck it sure is coming alone a little at a time and you will have it all done before you know it.. be cool to see your s10 getting some love and work done on it to get it finished and testing and on the track or to just drive around
@brandonf.5868
Жыл бұрын
Great job tommy proud of you sure have came long way buddy in no time. Great content as always
@tbone67gthenderson78
Жыл бұрын
Looking good Tommy that’s the only way to do it is to do yourself learning as you go buddy . Good luck with your project keep up the good work.😎
@jmr1970
Жыл бұрын
Keep on trucking Tommy. The way trough the eye of a needle is to press on. 😮
@frediefarmer
Жыл бұрын
👍🏽🇺🇸👍🏽 you are doin great buddy.. keep up the learning
@DJ63phx
Жыл бұрын
I like watching your channel cause you're just learning as cool to watch you learn. How to work on your cars? And do the projects on your cars
@nickbrooks5136
Жыл бұрын
You definitely have to get the shorter pan. I have the same truck and built it fully out with ls. Procharger. T56 magnum Wilwood brakes. Coil overs all around and everything else. The stock truck pan is the lowest part of the truck if you use it. Won’t take long to hit it and break it. If you track the car and hit down hard it’ll break. Save the headache new lower pans are cheap and great insurance. Nice work buddy love to see it
@SpeedLegacyGarage
Жыл бұрын
Keep up the hard work Tommy I think your doing an amazing job for your first project by yourself.
@MrBReal-xc7qm
Жыл бұрын
I carumba Hernando, those lights would be right at home in tewana. Viva Mexico.
@lb9gta307
Жыл бұрын
I like those new lights for the project truck. They'll look good with the stance that truck will have. They don't look bad on the daily but it's too stock to really pull them off.
@Ada-zn3pw
Жыл бұрын
Keep up the good work Tommy. Truck is coming along nicely.
@gf6.6
Жыл бұрын
It's fun to watch your builds... Keep chipping away at it. Do not be afraid of all those wires! Just think of it as one wire.. then go to next.. wiring is easy, hardest part is overcoming the anxiety of a pile of spaghetti.. Learn the basics for DC voltage and you can do anything on that truck..
@genedavis759
Жыл бұрын
The reason the pedal is going all the way to the floor is because the fluid is not in the brake system to stop when brake are applied.
@kirklund962
Жыл бұрын
With that pickup tube I think you would have to cut some of the stock windage tray. I don't know what you have but that's what it looks like and I have seen other videos that they had to do that.
@Bdogg5556
Жыл бұрын
Good job Tommy just slow that drill down a bit you will fill it grab the metal. Finesse is the key to saving your bits for another day.
@brianstephanierobertson357
Жыл бұрын
Nice job young Thomas!! Every little bit helps get things done!!l keep up the good work! Maybe you should help Allison on her school work since she helps you! Lol
@jamesbarton2950
Жыл бұрын
Thanks for new video been waiting for it 😁
@jesselee128able
Жыл бұрын
That is a 98-02 fbody windage tray. Perfectly fine to use on your truck setup, only issue you might have is where the pickup bolts to the tray. Might need massaged/clearanced
@kennethchapman9564
Жыл бұрын
Getting there and learning as you go. Best of all you will know how it was done when you are driving your stepside. Keep them coming.
@justdale1966
Жыл бұрын
Wow I think the new headlights look great set your truck apart from the others what does it look like at night should be nice
@RedEyedPatriot
Жыл бұрын
Sweet Man. Was cool to watch you guys race this past weekend at Slugfest. Seeing you on the Laptop was good to see. You got this Tommy, only better with time Man. 😎🏁🤘
@bobtucker8875
Жыл бұрын
That's pretty neat 😃. Thanks for sharing.
@johnperun232
Жыл бұрын
Great Content and Video 👍 Your self learning your project Thanx for sharing your experience and knowledge with your Great 👍Work Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸 Allison is a Great 👍Helper 😊
@geraldparker7008
Жыл бұрын
Good to see you doing manual brakes they work good if setup right and don't take up so much room.
@donhorner6019
Жыл бұрын
Glad to see your still at the OBS. You learn by doing,good job Thomas.
@cphollingdale4412
Жыл бұрын
pro-tip... get an impact swivel and impact extension for your impact gun, I'm not going to tell you to run out and get a massive set of impact sockets (you should) but there is so much flex and give on those standard socket extension and swivel that your impact gun will not be able to produce any torque (you may get 20 or 40 FT pounds instead of the few hundred the impact gun is suppose to give you).
@scotthazelton519
Жыл бұрын
Thanks for sharing Tommy
@IDRIVEOLDCARS
Жыл бұрын
Let’s go Tommy hope it’s a banga
@victormackenzie-davis2711
Жыл бұрын
"LIGHTS JUST FINE" you will be doing other things in time, consider couple inches drop would look cool leaving all the stock tires and wheels. Just a thought.
@chrislovett9711
Жыл бұрын
Thank y’all for the content and letting us live through y’all in today’s time it’s a vacation
@mikewinslow7939
Жыл бұрын
Leave them alone. Looks awesome
@BenBurke1983
Жыл бұрын
“If everyone would stop blowing up their motors” 🤣 Very funny Fr.
@jimgross3246
Жыл бұрын
keep up the good work!
@chrisholland8235
Жыл бұрын
I love yals cat
@stephenwebb412
Жыл бұрын
Get you some aluminum bright wheel cleaner for those aluminum parts that what I used on my ls and came out great
@mikeburnett7028
Жыл бұрын
I like the new lights in the truck. Keep’em
@raybowles169
Жыл бұрын
Good job Tommy keep going you will get it all done and have a super nice truck and your will love it even more because you done it all yourself so don't give up .
@Thriller627
Жыл бұрын
Awesome !! God bless you guys! Cheers!!
@make-it-work4u
Жыл бұрын
I think they started shortening the windage tray to help with the bay to bay breathing in the block. Ls engines don't breathe well because of the block and main caps preventing air from moving and actually stealing some hp. Thats why people like the old 350 bottom end but the ls top end thus the ls next block was born all because of the bay to bay breathing problem. Hope that helps
@5150streetsoklahoma
Жыл бұрын
The truck is coming along awesome! The reason why that windage tray is cut back is for the holley oil pan or swap oil pan. If you use the original truck oil pan you don't have to use that windage tray, you can use the stock truck one.
@shoopsgarcia1283
Жыл бұрын
Those head lights look like the Mexican trucks from Texas...😅😂
@barbaranichols802
Жыл бұрын
I think the headlights look great Tommy!😊
@wps620
Жыл бұрын
That old 5.3 is gonna be like a tornado under that hood.
@freddiemoralez1536
Жыл бұрын
🎉🎉 TOMMY IT'S GOOD TO SEE HOW FAR YOU HAVE COME, YOU HAVE MORE CONFIDENCE IN YOUR WORK. KEEP PUSHING &I WILL KEEP WATCHING. CAN'T WAIT UNTIL THE NEXT VIDEO. AS ALWAYS GREAT CONTENT AND GOD BLESS ALL.
@rafaelbonilla3759
Жыл бұрын
Great job Tommy 👍🏻 Wish you the best.
@droppinghertz9922
Жыл бұрын
You know that u can get paint match color rattle can by paint code off the inner door at any Napa that deals with paint don't quote me if they still till this day but my boy got some made up for a wing he wanted to paint for his car just thought I would share keep kicking ass bro ✌
@gregrogers3030
Жыл бұрын
Man your truck is coming along and it looks awesome.
@tiffaneykovalik3908
Жыл бұрын
Good job Tommy. Proud of you.
@bigdaddy1001rules
Жыл бұрын
I do the same thing I’m paranoid and I will watch the repair video 5000 times to make sure I’m not fucking something up 😂
@burtmoore2101
Жыл бұрын
Nice progress! You're doing great man!
@mediumjumbo7484
Жыл бұрын
Just watched you & Btk dragging out the OMG Nova ❤
@cjscustoms3729
Жыл бұрын
This should be inspiration to any young man. Hard work will pay off! This build is built not bought. You keep grinding and show the younger generation hard work will pay off. This is a long process but I’m the end the gratification will pay off when you have a “daily “ that will put a hurting on some feelings!!!
@G2K
Жыл бұрын
Awesome Vid man . Keep Chipping away💪💪👍👍
@Cujo420gw
Жыл бұрын
Be sure to ditch the relief port in that gen 4 pan I used a oil drain plug with rtv on mine if you leave it it won't make over 55 lbs of oil pressure.
@LilRay.18
Жыл бұрын
You remind me of myself bro 😂 I’m 19 and have a 81 Malibu and constantly doing shit to her, if I don’t know how to, I look up videos and try it myself. Of coarse most of the time I end up fucking up something, BUT I’ve learned that, the more I fuck up is the more I learn, the more I learn is the less I fuck up 😂🦾 keep doing your thing homie and keep the content rolling in!
@Amxracer
Жыл бұрын
Cool 😎 . Let’s go !
@tccurtis2932
Жыл бұрын
That's the best way to learn things. Just jump in and get get your hands dirty.
@troymiller1287
Жыл бұрын
Factory headlights and tail light lenses for the win 🏆
@Ageman6058
Жыл бұрын
That daily would look so much better with some different wheels and tires. Wheels and tires can vastly improve the look of a truck imo
@tammiechambless3384
Жыл бұрын
about time we need more videos bro for real
@gregl5677
Жыл бұрын
Mine was solid but rusted floor pans. I wired wheeled painted mine and put deadener on it. Make it solid. So it doesn't sound hollow and all that.
@Dan-ge7cy
Жыл бұрын
Never give up ;) you can do it. !
@dougcheesman5527
Жыл бұрын
Don't forget, you're gonna have to bench bleed those brakes .
@ytwhite5930
Жыл бұрын
You'll get the tune down T2G,don't sweat it! What's up with the 389 Tri-power on the stand in front of the Falcon? Go Tommy go!!!
Пікірлер: 330