I know the video is old but do you have anymore exhaust videos? Love the sound
@70velle2
5 ай бұрын
I'm sorry I don't. I changed exhaust, it was too loud. I changed with a guy and got a borla exhaust. Then the slp was too loud for him and he traded for a billy boat exhaust.
@charlesroyal3428
6 жыл бұрын
SWEET!!
@YoRon427
2 жыл бұрын
I've also got the stage 1 cam, heads, headers, and have 450whp. I didn't want the stage 2 or 3 for the street because how often are you above 4,000 RPM.
@kevinobrien4155
2 жыл бұрын
Exactly, people do it for the sound and sacrifice drivability and practicality.
I have a 98 coupe, auto trans, am thinking about the same cam. Did you have to swap the torque convertor out or r you still running the stock convertor???? Sounds awesome, have you had it tuned since the upgrades were added?????
@70velle2
5 жыл бұрын
Paul, its a 6 spd, but its a small cam, I dont think you would have to replace your torque converter at all.
@70velle2
5 жыл бұрын
I had it tuned before I put the SLP Loud mouth on. The entire package was really quiet with the titanium exhaust on before, now you can hear everything. I would suggest a quieter exhaust so your neighbors dont hate you. Goto BTR's website. I think they say you might have to change your torque converter on the stage 2 or 3, but 1 if thats where you go will be fine. The driving manners are great on the one, and it is a bump in power.
@productionswhatever9
2 жыл бұрын
@@70velle2 HI, I'm getting this cam and the z06 intake for my stock 99 vette auto but not the heads do you know more or less how much power that should equal to after a tune?
@70velle2
2 жыл бұрын
@@productionswhatever9 well I have the long tube headers, and the exhaust with the heads that are milled for a higher compression ratio. I got 401 hp and torque at the wheels when it was dyno'd. The tune I got left some on the table, as it was lean at certain rpm's... Do I know what you would make all things being equal with a better tune? I'm guessing you would be 40 hp less due to the loss with the auto vs the manual transmission and the headers, heads and higher compression. But I think your car would be as fast or faster due to the auto transmission shifting faster. I'd say 450 HP at the crank, 360- to the wheels.... What do you think
@productionswhatever9
2 жыл бұрын
@@70velle2 360 to the wheels would be fine for me thats probably like 70 more hp and I think the thing is fast from stock so haha. Thanks.
@mrGW
3 жыл бұрын
How do you think the performance is compared to stock?
@70velle2
3 жыл бұрын
I think it is more robust than it was stock. Its mild, 401 hp/Tq at the wheels, so what seemed fast when i got it, is getting slower by the day... I picked up a supercharger though to up the ante.... The good thing is the cam is close enough to stock that all i need to do is change the heads and it should perform well
@mrGW
3 жыл бұрын
@@70velle2 tank you for your answer, im in the process of deciding between stage 1 vs 2, but here in sweden we have such strict regulations around emssions. I want the atage 2 but then i will have a constamt big problem with the yearly inspection, and i dont want that. So it seems like the stage one is the cam for my application.. I think it sounds like it has some loop? How is the sound compared to stock in reality?
@70velle2
3 жыл бұрын
@@mrGW there is definitely some loop. You need headers and an exhaust to hear it though. I had long tube headers and Z06 titanium exhaust and you couldn't hear it. Then put on the loud mouths and it's loud.
@70velle2
3 жыл бұрын
People know it's not a stock camshaft when they hear it, but it has great street maners
@mrGW
3 жыл бұрын
@@70velle2 thats what im after, i want that chop. But its almost impossible with the emissions testing every year.. And there aint that many soundsclips out there to listen to.. But thank you so much for your reply
@vincentgirard99
7 ай бұрын
Can you drop a link for the camshaft
@alphatwo5183
3 жыл бұрын
Is it tuned with the cam in this video?
@70velle2
3 жыл бұрын
Hey, yeah it was tuned after the cam install
@alphatwo5183
3 жыл бұрын
@@70velle2 you think I’ll be alright if I drive for a little while without a tune with the same cam?
@70velle2
3 жыл бұрын
@@alphatwo5183 to be honest man, I don't know. Are you saving up for a tune?
@alphatwo5183
3 жыл бұрын
@@70velle2 yea i am and also I’m just trying to find a good tuner as well but for mean while I wanted to drive it like that
@70velle2
3 жыл бұрын
@@alphatwo5183 if you want a decent answer, I would go on some Corvette forums or LS forums. There will be more expertise, that way you can be sure. Also they may have some local recommendations for you.
@thomaswhite6501
3 жыл бұрын
What size is cam i see stage 1 but what are specs i have a c5 myself a d wanna do a cam
@@70velle2 wow really puts in perspective how small my cam is and how much hp I still have on the table. I'm running a stage 4 truck cam in an ls2, it's 224/230 and .550 on a 109 lsa lol. Thinking about bumping up to one of the bigger cams but curious about tq loss. I'm in a crew cab truck
@70velle2
3 жыл бұрын
@@swappedoutZ71 if your serious about it, call the cam companies and discuss it. If the ride makes good power, maybe just leave it as is.
@swappedoutZ71
3 жыл бұрын
@@70velle2 it makes good power but I'm taking my lift off and going down in tire size. I have a 4k stall and 4.10s and it's currently a burnout monsters so I can afford to lose SOME low end but don't want to lose functionality of a truck. I'm thinking of going back to stock 3.42s as well. The 4.10s were a bandaid for when I had less power but I don't need them now
@unknownstudd69
2 жыл бұрын
With cats or cat-LESS?
@pwashvet
2 жыл бұрын
How much did you mill your heads
@70velle2
2 жыл бұрын
Don't know, they were done by previous owner
@jimchristopher6395
2 жыл бұрын
Diddy!
@70velle2
2 жыл бұрын
Y o, Red Fresh!
@unknownstudd69
2 жыл бұрын
Why not stage 2 or 3?
@70velle2
2 жыл бұрын
I wanted a milder cam to go with the supercharger I bought
@bobtom9285
4 жыл бұрын
meh
@70velle2
4 жыл бұрын
Lol
@georgespicer6678
3 жыл бұрын
Did you have your heads ported and. Milled?
@70velle2
3 жыл бұрын
@@georgespicer6678 Hi George, they were milled, but not ported.
Пікірлер: 50