They look good and I could go for them @ $500 but $900 bucks is just too much to justify.... ( Could they could be done in a PC composite / plastic injection for half the price ? ) I'll have to wait and see if there's a price drop, or someone else does a more reasonably priced version.
@mahirsangor
Жыл бұрын
I saw those fins since a year now on websites but $999 for carbon fiber and $899 for carbon flash not worth it all. Hope it will be much cheaper in future
@AndrewBurtonS-group
Жыл бұрын
wow $899 for Carbon Flash I hope they go on sale Ill buy haha
@josephdixon507
Жыл бұрын
They are salty for four pieces of plastic. Must be the Corvette Tax!🤣
@ParagonPerformance
Жыл бұрын
@@josephdixon507 Plastic? These are 100% Carbon Fiber.
@josephdixon507
Жыл бұрын
@@ParagonPerformance I wasn’t questioning the composition per se. As much as I like the look, I can’t get them anyway since they won’t work with my exhaust. I think others have bigger concerns on cost than material. ijs
@AndrewBurtonS-group
Жыл бұрын
@@josephdixon507 I guess so haha
@nobark1
Жыл бұрын
@@ParagonPerformance Carbon Fiber is just a Fancy kind of plastic. :) They look good. But too expensive for what they are and where they go
@gavinchiu4462
Жыл бұрын
Shouldn’t the carbon flash be cheaper then carbon fiber, I’ll buy it if it goes on sale.
@nobark1
Жыл бұрын
Same price: $900 either way
@C8Kid
6 ай бұрын
Looks simple and easy w/ after market exhaust Stock exhaust bumper is tight to reach your hand in between to put the nuts on I’m ordering me a set👍🏽
@MasterGGG
Жыл бұрын
lol $900 for 4 pieces of carbon fiber, what a rip off.
@markburry9989
10 күн бұрын
Only half of the nuts provided were lock nuts. Studs on fins 1 and 4 do not fit through the grill. They are spaced incorrectly. I will be retuning these.
@ericktremblay9512
4 күн бұрын
Will you be designing ones for the Z06 in the near future?
@vitoaugello1677
4 күн бұрын
It seems everything for the corvette is double or more in price. Same thing for my mustang GT was $299. Pretty sick and silly.
@ParagonPerformance
4 күн бұрын
These cars are also more money than a Mustang GT :) Good work isn't cheap, cheap work isn't good!
@Abrandnew3
Жыл бұрын
900 😂😂😂😂😂
@GinNBoost
Жыл бұрын
Looks great but price is tough pill to swallow. Hopefully they go on sale for Black Friday
@nobark1
Жыл бұрын
They didn't
@markcarpenter9292
4 ай бұрын
Hi, is there enough clearance to install on the ground?
@ParagonPerformance
4 ай бұрын
Yup!
@johnnyparker2128
4 күн бұрын
Hmm, what's the additional weight?
@ParagonPerformance
4 күн бұрын
Less than a gallon of fuel.
@johnnyparker2128
4 күн бұрын
@@ParagonPerformance Hey, you can't beat that!
@blackened300a
9 ай бұрын
It’s easy with a non factory exhaust. With the factory exhaust, the bumper has to be loosened up to reach behind to make the threads.
@junaidshahid848
8 ай бұрын
Are the fins placed on the factory stock rear diffuser? So essentially can drill holes on the stock rear bumper ?
@ParagonPerformance
8 ай бұрын
No holes are required to be cut besides underneath for some screws.
@williedavismckennie5334
Жыл бұрын
NICE ! Plus you guys are in Iowa ! Go NORSE !
@stevedolan5065
Жыл бұрын
Other than looking good, what do they add to performance, and I’m not trying to be obtuse, I would like to know. (C-6 owner)
@ParagonPerformance
Жыл бұрын
The fins don't have any performance gains. You'd need a real diffuser like the Verus one.
@johnelegant1727
Жыл бұрын
Sure hope you are getting close to releasing similar for the Z06, of course with mods due to the four center tips on the Z! If not finalized, perhaps a little sharper edges, a touch more pointy for the Z.
@ParagonPerformance
Жыл бұрын
We are still waiting for our Z06s so it’s going to be a little while.
@pjcornell9691
Жыл бұрын
It's really a shame still no C8 rear diffuser option on the market I would buy..
@ParagonPerformance
Жыл бұрын
Have you looked at the Verus Rear Diffuser?
@harrysmith2431
Жыл бұрын
👍😎
@josephdixon507
Жыл бұрын
I’ve been looking for these for my C8 but is it my understanding these WILL NOT work with the Lingenfelter by Corsa exhaust? Shame if that’s the case. Let me know one way or the other. Thanks!
@ParagonPerformance
Жыл бұрын
You are correct they don't clear the Corsa or Borla Exhaust System.
@rawimages
Жыл бұрын
Yup, same issue. Love the look of them, but they don’t clear the Corsa
@josephdixon507
Жыл бұрын
@@ParagonPerformance damn shame! Any plans to accommodate the Borla/Corsa guys in the near future? Maybe a three fin deal that is two outboard fins and one center?
@peterszenkowski7769
Жыл бұрын
little trimming is required, they cut pretty good.well worth the trouble
@josephdixon507
Жыл бұрын
@@peterszenkowski7769 details please
@55Mrcry
Жыл бұрын
I did this install, not exactly as easy peasy as shown here...I'll just leave my comment as that.
@ParagonPerformance
Жыл бұрын
Which exhaust system do you have?
@55Mrcry
Жыл бұрын
@@ParagonPerformance OEM
@josephdixon507
Жыл бұрын
@@55Mrcry the OEM exhaust has that huge footlocker sitting back there which made me wonder how the Borla and Corsa which take up less space prevents this install.
@ParagonPerformance
Жыл бұрын
@@55Mrcry Yea the OEM Muffler takes up a lot of space. We've installed them with OEM exhausts and you're right it is harder but still possible.
@55Mrcry
Жыл бұрын
@@ParagonPerformance the issues I had was that some of the threaded studs were crooked, one was too short, also the numbers at the top of the template were in reverse order & only one fin actually fit without issue, I had to cut the meshing to get the studs through...I was sent another set and was eventually able to make it all work...the template I found useless...I just followed the angle underneath...also the 1/4" drill bit in my opinion is a bit large I used a 13/16...I noticed in the video that the outer fins on both sides were a bit crooked...I measured my distances....way over priced for the quality...I could see sanding marks through the paint...one fine fell a few inches to the garage floor and the paint chipped....
Пікірлер: 57