I have a 65 and your videos inspire me to do the restoring myself keep it up buddy!!!
@Velvethamma
11 жыл бұрын
It's a big job for sure... but you are doing a fantastic job of making it better than new again! Thanks for the vid
@howtocreatesculptures6713
6 жыл бұрын
To a guy like me that always has to do everything myself you sure are an inspiration to me , i've got to do a cab swap soon to my F-450 super duty diesel dually and thanks to you i now know exactly how i am going to do this by myself : ) thanks man ! : )
@stevenwaggoner635
6 жыл бұрын
Ballz of steel. Rolled that cab on his own with 0 problems.
@TheShadeTreeFixitMan
11 жыл бұрын
Really slick looking. Those jambs look better than new! It was amazing watching you flip and remount the body all by yourself.
@dongrider9040
5 жыл бұрын
I love your video. One man and his truck. Something most will never understand!
@Gibson63.
5 жыл бұрын
Don Grider Thanks for watching
@AmyAndrewAdventures
9 жыл бұрын
I was nervous when you pulled the cab onto the block! I just found you're channel a few days ago and I'm thoroughly enjoying and learning from your restoration. Great stuff so far!!
@botoepfer2857
8 жыл бұрын
very cool cab lifting device ! saved me tons of welding and fabrication
@Gibson63.
11 жыл бұрын
I'm using nason brand 2k primer and epoxy and the evercoat rage extreme body filler,after body work I spray one coat of epoxy and three coats of 2k high build,then sand and prime agin until its smooth .this is my first time doing body work learning as I go thanks Steve
@BradLobregt
10 жыл бұрын
It's amazing how you do stuff by yourself. Great videos...... Brad
@MrTontoterra
6 жыл бұрын
Your cab-lifting engine hoist attachment is very clever.
@Gibson63.
6 жыл бұрын
Thanks for watching
@bridchvtruck568
11 жыл бұрын
wow you've done a ton of work on that truck lookin good see ya :-)
@ndebt4kidz
11 жыл бұрын
That cab is looking sweet! Thanks for the video.
@bill88wins99
11 жыл бұрын
Glad to see a new update. You got going your way.
@51chevynapco
10 жыл бұрын
HAHAHA!!! That's so funny Steve!! That's almost EXACTLY how I did my cab!!! I had to lift mine WAY up in the air to get it on my frame. I had a big digging bar stuck in the end of my cherry picker to make it long enough to reach that high. Keep up the good work man!! :-)
@JunkyardTailgate
6 жыл бұрын
I know this was a few years back but I like the engineered cab lift device mod.
@Gibson63.
6 жыл бұрын
Junkyard Tailgate Thanks it worked out great
@Gibson63.
11 жыл бұрын
Thanks man,this sanding will sure wear your fingers out in those tight places
@jevchance
11 жыл бұрын
Nice work man, that was cool watching you flip the cab.
@TTOCS11
11 жыл бұрын
great quality work as usual, great to watch cheers
@Miniquadtopix
11 жыл бұрын
Been watching all of your videos, I'm working on my 66, doing almost exactly the same stuff you are. You are doing a great job and are keeping me inspired to keep going on mine. Keep up the videos! Also do you have a list of all the products you are using? Like what brands of filler, epoxy, 2k you are using. What order are you priming? One base of epoxy, then all 2k after that? Thanks for the info!
@rexland2401
4 жыл бұрын
Here in Az. Doing the same thing for my 66 s10, just started a mo ago I want mine to look like your red one ? What color red is it, and where do you buy all your new parts. Thanks. Jim
@cecil6711
11 жыл бұрын
Great job. It is looking NICE!!!
@randoaragon7058
7 жыл бұрын
bad ass set up you got there bud !
@TheRickfix
11 жыл бұрын
looks real good,nice job
@ceedell
11 жыл бұрын
lookin good! engine lift adaptor works great.
@CountrySideClub
11 жыл бұрын
Great progress!
@johnsont963
11 жыл бұрын
Nice tooling for re orientating your cab, you picked it up at the best place the pinch weld. I did a 64 chevy and those cabs a heavy in relation to the truck cabs of new trucks . is the interior going to painted Fawn and white?
@black88coupe
11 жыл бұрын
Great job!!!
@Gibson63.
11 жыл бұрын
Haven't decided the color of the paint yet, but not going with the original fawn and white
@hayzersolar
2 ай бұрын
did you build the hoist adapter or make it?
@SwPiotrek
11 жыл бұрын
Good video.
@CHOPSHOPUNDERGROUND
10 жыл бұрын
I like that attachment you built for your engine hoist!! Do you have a vid of it? Of how it's built? If not can you please do one! THANKS!! Great vid!!
@gibsonframing7573
10 жыл бұрын
dont have any vid of the engine hoist, seen it used once on the 67/72 chevy site and built one some what like it
@zzzdogutube
11 жыл бұрын
looks good
@finpainter1
11 жыл бұрын
nice work
@GBassJones
5 жыл бұрын
Hey there. I just got my 63 cab lifted off the frame and bought lumber to build the dolly rig you show in this video. Do you have dims on the cuts to build the frame? I have the wheels, 4x4s and 2x4s ready to go. Any help?? Thanks!!! (Used your videos to get so much done!!)
@Gibson63.
5 жыл бұрын
I just measured under the cab for a good fit, The 4x4s were 16’’ tall then I bolted the wheels under that which made it taller
@Gibson63.
5 жыл бұрын
I also use this for my bed in this video (sanding/install grille/bolt up bed) towards the end of the video
@GBassJones
5 жыл бұрын
@@Gibson63. Hey and thank you! That helps a lot actually. I may have to not only measure for the cab, but also my lift legs to ensure I will clear the casters. Again, many thanks for the videos, they are an absolute life saver for me.
@ak47popoff
11 жыл бұрын
cool!
@muddywaters6
11 жыл бұрын
nice
@Gibson63.
11 жыл бұрын
Still got a long ways to go
@cantyoufeelthelove
7 жыл бұрын
what hvlp gun brands did you use?
@robertboyero3797
9 жыл бұрын
Gibson, do you think the engine lift method would work to lift a cab with doors and glass?
@Gibson63.
9 жыл бұрын
I wouldn't try it with the engine lift I'm using because it will lift on the back end when it is extended all the way out especially when you roll it away from the cab and it starts to sway
@TheBobbykey
6 жыл бұрын
did you send parts to be dipped or blasted
@Gibson63.
6 жыл бұрын
I had a guy from Nashville to sandblast all the sheet metal and cab
Пікірлер: 58