Good information Scott. I have been lucky had a good friend that owns countertop plant ,he did all my laminating for me . He recently passed away ,so now I need to learn these skills . seems one of the important parts is letting the glue get just the right amount of sticky . He also used an edge router ,much small then the one you are using . Thanks for sharing .
@4G63Tpower
3 жыл бұрын
Trim router
@maitildamcintyre9344
3 жыл бұрын
Scott it’s coming along quite nicely. That laminate looks great and I look forward to seeing how it holds up. Thanks for the update.
@lanezaiden7192
3 жыл бұрын
Sorry to be offtopic but does someone know a trick to get back into an Instagram account?? I was dumb forgot the login password. I would love any tips you can offer me!
@austinblake6376
3 жыл бұрын
@Lane Zaiden instablaster ;)
@lanezaiden7192
3 жыл бұрын
@Austin Blake thanks for your reply. I got to the site through google and I'm trying it out now. Seems to take a while so I will get back to you later when my account password hopefully is recovered.
@marcusallenyt
3 жыл бұрын
nice one . it the high light of my Sunday
@scottadamson6116
3 жыл бұрын
Glad to hear that!
@PotentialProphet
3 жыл бұрын
God checks on you when you're alone, not feeling okay, not doing well or upset with people on your job. 🙏🏾💓💯
@ryanmccain1158
3 жыл бұрын
Nice. Love these.
@scottadamson6116
3 жыл бұрын
Glad you like them!
@johntatman9168
3 жыл бұрын
Hey Scott I gave up on the spray glue and went with a roller. Buy cheap rollers and throw them away each time. No overspray mess and no cleaning afterwards.
@scottadamson6116
3 жыл бұрын
Yeah I use that for the smaller jobs, I find for stuff like the foam and fabric it applies way too much material.
@johntatman9168
3 жыл бұрын
@@scottadamson6116 I agree it does not work on material and spraying is necessary.
@robinhillaert7786
2 жыл бұрын
How are you finishing your edges?
@Chuckrunseveryday
3 жыл бұрын
Hi Scott! Winnipeg boy here and following your journey. I found you through Sara & Alex's build series. I'll be keeping an eye out for your Sprinter on the roads. Anxious to see the finished product.
@scottadamson6116
3 жыл бұрын
Hey Chuck! Sorry I missed this comment. Thanks for following along! 🇨🇦
@scottadamson6116
3 жыл бұрын
And hope you're staying warm in this insane cold snap!!
@Chuckrunseveryday
3 жыл бұрын
@@scottadamson6116 Yea! Trying to get stuff done on my 2019 ProMaster 3500 159 and with this cold it's not happening fast. I gotta cut the holes for my fans and install my roof rack and panels so I hope the weather warms up a lot in the next couple of weeks.
@danielt4730
3 жыл бұрын
"When it didnt fit.... we MADE THEM FIT." Hahaha made me laugh
@4G63Tpower
3 жыл бұрын
If you need to remove laminate after it’s stuck just pour thinner between the layers will come right off. Once it flashes off you can reapply glue and reuse
@scottadamson6116
3 жыл бұрын
Good Tips!
@steveschaefer5835
Жыл бұрын
After gluing down the laminate on your countertops, how do you finish the edges or do you just let them be plywood edges? Thanks
@charlesrg
Жыл бұрын
Great videos. I'm wondering if soft close slides are compatible with this type of marine slam latches
@artofnoly9754
3 жыл бұрын
Run some thinners thru your glue gun straight after use... give it a whirl! Lookin' good, Pasadena!
@briandoss5321
3 жыл бұрын
Really enjoy your videos! Can you give me a link to the slam latches you like please?
@Boy_rich
3 жыл бұрын
@scott adamson Can you tell me what type of cabinet door hinge you used? I too am using 80/20 for our cabinets but want something to use with at least 1.5 inch overlay...any suggestions? thanks!!!
@adamkaminski1835
3 жыл бұрын
Hi Scott, what kind of fabric you used or you recommend for upholstery? Thx for a big dose of knowledge in your video.
@scottadamson6116
3 жыл бұрын
Hey Adam! Its called marathon tweed or duramax
@1966stumpjumper
3 жыл бұрын
Hi Scott, Enjoying your videos so far ! I’m planning out my build just wondering what your costs to build your interiors? Looks like your building them as a business ?
@scottadamson6116
3 жыл бұрын
Hey thanks for watching. I dont do this for a job its just for fun!
@curiouscampervans
3 жыл бұрын
So curious how you finished the edges of the cab doors. I know you mentioned there's another video coming on that but I'm on the edge of my seat!
@scottadamson6116
3 жыл бұрын
Coming soon!
@waken66
2 жыл бұрын
@@scottadamson6116 any update on the edge finishes? I'd really like to see what you do.
@Awall2131
3 жыл бұрын
Loving the build, what was that material used in the beginning of the video, and looked like used to upholster those speaker cutouts?
@scottadamson6116
3 жыл бұрын
Its called Duramax or Marathon Tweed
@Awall2131
3 жыл бұрын
Scott Adamson huge. Thanks man
@TerryManitoba
3 жыл бұрын
Hey Scott - I'm in Wpg and am close to doing some 80/20 work - Any chance i can have a closer look at your van?
@scottadamson6116
3 жыл бұрын
Hi Terry Ive got lots of 80/20 information on here and on my website you should check out. Also feel free to email me through my website. Thanks
@TerryManitoba
3 жыл бұрын
@@scottadamson6116 I have checked out several 80/20 videos. What is your website address? This one did not seem to work - scottradamson.com - file not found?
@thenomadicrabbit2890
3 жыл бұрын
Yep, Slap latches, I totally agree kzitem.info/news/bejne/yGiw36iPkHqXao4
Пікірлер: 41