Thanks so much, I put mine in today, my caddy is different Theres no mirror at the front because there is no windows and there is plastic between the front seats and back of the van I bought a suction cup mirror to attach the screen to, ran the wires got them into the back but having issues with the door itself I tried to take off the cover on the inside of the back door, no joy 😅 I do have to replace the back break light glass so seen how thats done which is a two in one Great video thanks for thorough explanation
@rowanlewisuk
3 жыл бұрын
Quality video, never thought about the mirror. Was looking at expensive aftermarket head unit as a solution
@bennmurray5237
Ай бұрын
Hi, which rear view mirror kit did you use ? Please can I have a link. Thanks
@bluestoneryan
2 жыл бұрын
Brilliant video just bought a new android dash screen. I was hoping the camera was Bluetooth too but wired.
@B16GYG
3 жыл бұрын
Great videos keep up the good work can't wait to see what you do next. both u 😎👌👍
@cruisycampers4749
3 жыл бұрын
Thanks! There's plenty more content to come on this van and our other vans!
@spike7269
3 жыл бұрын
thanks, I have an x bg caddy too
@ThinkAloud
4 ай бұрын
Watching this in year 2024, I guess it looks kinda difficult to put it on :(
@epexlinux
2 жыл бұрын
Nice job. Want to do the same but am worried about the screws rusting out on the camera bracket
@cruisycampers4749
2 жыл бұрын
Yeah you could always replace them with stainless screws as the ones that come with it are a bad quality
@roccachoppa1
2 жыл бұрын
Hey cool vid @CruisyCampers. I just fitted a camera to my caddy and had the problem of it not working when the engine is running so I put a relay in and it works great apart from the camera cuts out when the indicators are on. Did this happen to you guys and if so how did you fix it?
@cruisycampers4749
2 жыл бұрын
Thanks! It sounds like you might have taken your power from not a constant 12v feed? Where did you power the relay from?
@roccachoppa1
2 жыл бұрын
@@cruisycampers4749 Ha it was the earth wire from the camera was wired into one of the blinker wires so I just mounted the earth wire underneath where I put the relay which fixed the problem.
@scotthoolz2082
2 жыл бұрын
Hey guys this video saved me from scratching my head, but after installing the relay when I put in reverse with engine running the relay just buzzes and camera still doesn’t work? Do I need constant 12v or acc 12v to the relay
@cruisycampers4749
2 жыл бұрын
Either a switched 12v or constant 12v feed will be ok. I would check the earth for the relay is working and everything is connected securely.
@dylandoc
Жыл бұрын
hi guys having same problem anyone got a solution thanks
@stealthtuning4386
2 жыл бұрын
Was it 11amp wire you used guys?
@cruisycampers4749
2 жыл бұрын
Yes I believe it was around that, although you could get away with lower
@spike7269
3 жыл бұрын
can you tell me where you got the fuse box diagram form
@cruisycampers4749
3 жыл бұрын
The fuse box diagram was just taken from a google search. You can test which plugs are a switched live by using a multimeter
@Emace89
Жыл бұрын
Do you have a link for the relay?
@cruisycampers4749
Жыл бұрын
It is a standard switching relay available at any automotive store
@hughtrowell8072
3 жыл бұрын
Please don’t take your light cluster off like that - you’ll only scratch the paint or break the fitting. Remove the inner cover first then while holding the cluster in place with gentle forward pressure with your left hand, hit right hand face of the lamp cluster with the flat of your right hand at the top then the bottom of the right hand face to send it sideways and outwards, which unclips the light without damage.
Пікірлер: 23