You'll forever be the man. You were teaching me before I ever heard of Bardwell, it still saddens me knowing you're gone. Your library now resides on a couple of my flash drives just in case. Thanks again, and as always, wishing you were here.
@mervynvanvuuren9714
5 жыл бұрын
Your knowledge and videos have helped me so much, you will always inspire although you are gone, all my best wishes to your loved ones and thank you, you are sadly missed.
@roberthamann7939
5 жыл бұрын
I've been building my first 3" over the past few days and have stumbled two days and your videos have saved me. Thank you for all the time you put into this hobby. You helped so many people get into this amazing hobby.
@terrymurphy562
7 жыл бұрын
How very sad to hear he has passed away. Thank you for your reply and god bless you.
@CGKFPV
2 жыл бұрын
5 years later his videos are still relevant. Thank you. LEGEND.
@RYVENANT
3 жыл бұрын
Got a new tiny whoop today, throttle response was shite. Figured out the endpoints and midpoints were way off. I never had to trim before for my 5" quads. Search "endpoint calibration betaflight" and here blue falcon pops up. Same guy that helped me with the old taranis back in the day. Almost 5 years later and these videos still help. RIP man.
@scoop3
6 жыл бұрын
RIP brother.. Thanks again for all the help you've brought to the community.. just used this video, yet again, to setup a new quad...
@techFPV5964
4 ай бұрын
JC was simply a genius and a young man waay ahead of his time. 🇺🇸🙏✈️👍
@_antwonTT6
4 жыл бұрын
Here again to reset my QX7... Thank you again for everything sir. Thank you for leaving us with a small piece of your vault of knowledge to live on.
@mafiafpv3469
5 жыл бұрын
Still watching your videos bud thank you so much
@xgoodvibesx
4 жыл бұрын
Still teaching me stuff, thanks JC.
@daviscc65
7 жыл бұрын
I have been watching these very very helpful videos all day. Thank you so much for taking the time to make these for ppl like me.
@shaunhallier5035
4 жыл бұрын
Fixed my exact problem 👍! Sorry to hear he passed away. His videos definitely help people
@CRAIGBYRD1
7 жыл бұрын
Great step by step instructions... Ive actually been struggling to perform this task for a long time... thanks for the help.. ps put the bud light down lol just kidding love your get some things off your chest video.. you rock brother ... good luck with school, your a very bright young man,will go far in your in your in life...
@justinmedina2050
4 жыл бұрын
even nowadays this video is sooo helpful. Thanks for the explain things easy.
@kumardeepam
2 жыл бұрын
Thank you so much. Was very helpful. To set the midpoint, on tbs tango 2 I had to use subtrim, changing ppm center did not work.
@alumahomeinspections7009
3 жыл бұрын
Hi, Betaflight shows Throttle and Pitch inverted. How can I fix that issue? Thank you
@DSB.TecnologiaMaker
4 жыл бұрын
Irmão me responda uma pergunta.. Como eu programo meu radio, pra armar, ou seja, para dar partida nos motores. Se meu rádio e o Inav estão ajustados, porque ele não arma? Vc pode me ajudar ?
@rafaellopes4271
2 жыл бұрын
I’m trying to activate AUX 5, I put it on mixer but on betaflight only work until AUX 4, can you help me?
@Gex121
5 жыл бұрын
I have a problem where all my channels are mixed up. i use throttle stick on TX and yaw channel moves on betaflight. I tried all options (TAER1234, AERT1234 exct )and none of them works. Please help?
@hughhemington9559
7 жыл бұрын
My X9D throttle (ch3) won't increase maximum past 100 and in BetaFlight it reads 1957. I just get beeps when I try to increase it to adjust. Similarly in Yaw, I can't adjust DOWN from 1022 (in BF) -- I get beeps. I adjusted the yaw max DOWN from 2045 OK. I can't lower the roll from 1016. Same 1016 at the bottom of pitch I can't fix but I fixed the 2023 at max. Is my Taranis cowdered? Would Hall effects gimbals "fix" this or make it better? What would cause my transmitter to be this far off? (and will it matter much if I cannot get exactly 1000 & 2000?) How does this relate to what others say to do -- using the CLI command rxrange [channel] [min] [max] ? My X9d seems to wander around, mainly below 1500 at center, so my model tumbles like yours. I adjusted it using TRIM, but that's obviously wrong. So before I tried to do what's in your video I centered all the trims.
@uavskyhigh6175
6 жыл бұрын
So I have a shuriken 250 and frsky x12s remote when I connect to betaflight and go to receiver my yaw, throttle, pitch, and roll all work fine and move but none of my aux's work though any idea's?
@marvfpv5841
6 жыл бұрын
Realy thank you for this! Good Work.
@LineAnimation
7 жыл бұрын
Thank you! Excellent vid... as always!!!!
@mrmac1212
7 жыл бұрын
I ve a problem with my channels, any mode on my transmitter doesnt work well, its like , throttle have the position of throttle. i ve no glue how i can fix that. thx for your attention
@darksentinel9304
7 жыл бұрын
I binded with an ac800 successfully but the values won't move on betaflight when I mve the gimbals is that a binding or settings issue??
@censrd
7 жыл бұрын
Any idea on what to do if you values appear under the desired endpoints. IE you started off with value of 987 therefore you could easily minimize those values to start at 1000. But on my controller the lower starting value is 1060 and the max is 1920. So how do i extend the channel values instead of minimize as you shown here?
@rubenaguilar1198
7 жыл бұрын
The Sweep I'm having the exact same issue.
@censrd
7 жыл бұрын
I found a semi solution, it still doesn't quite get me to perfect 1000/2000 but at least closer than i can get otherwise, on page 2/13 in your selected model. and about 13 clicks down the page you will find "Extended Limits" Select that and it should open up the end points further.
@rtcfpv1012
7 жыл бұрын
The Sweep you could probably try adjusting the ppm frame.
@KH45430
7 жыл бұрын
Thanks! Great tip. Got em centered. Its "E. limits" on the Qx7. Works great. I was stuck on 1007 on all of my endpoints.
@rodrigopxto
7 жыл бұрын
The Sweep I'm having the exact same issue.
@rcpete7055
6 жыл бұрын
Do you know how I can do it on spectrum devo7.? I can change to 1000-2000
@jaycsfable
6 жыл бұрын
Project blue falcon I ve tried all your objectives but still can't get my throttle down to 1000 but if I drop down my miss from 1500 to 1320 the I can but full throttle only goes to 1750 help?
@jeffreyodachowski6247
7 жыл бұрын
I know there is a way to tell betaflight the endpoints r only 1060-1900 please tell me the what to say in the rx command or where I type in commands
@m1northreat
2 жыл бұрын
Youre awesome! thank you!
@yonallb
7 жыл бұрын
Thanks for the video, It helped out a new Qx7 owner. I had a flysky i6s prior and was able to figure it out without looking up a video. I guess that is opentx. ;)
@pagansteve793
7 жыл бұрын
hello great job with what you are doing with their Hobby helping out it's a great thing I have one simple question I can't figure this out I have a FR Sky taranis in my gain knob S2 it doesn't go full +100 frome -100 it stays at 0 with the knob at full left I am a newbie in the hobby don't know if I explain myself right I just can't get enough to travel the complete circle for my gimbal
@davoodghandaly2152
3 жыл бұрын
Brother. Howmuch setting end point is important in flight???
@jordanbass3210
7 жыл бұрын
Can I please ask you a question??? How important on a scale of 1 to 10 is setting up your end points 1 being not important 10 being very very important.? and what is the downside to not doing this at all someone would just ripped my head off telling me that I don't know what I'm talking about and that you do not have to do this I said betaflight and Joshua Bardwell strongly suggest that this is part of setting up your drone and he proceeded to tell me I'm just a noob that doesn't know what I'm talking about
@davidhopkins7785
6 жыл бұрын
Thanks for this, god bless you and your family.
@onicknacko
7 жыл бұрын
This channel is gold! Cheers!
@antoineozaneaux6881
7 жыл бұрын
hi PBF when I center up the sticks I end up in between numbers on my dx8 I have travel at 147 vs 150
@MarkFisch
2 жыл бұрын
What if the yaw is different then the others
@ktmjay9920
6 жыл бұрын
I have seen center point adjusted with sub trim? What do you think?
@jousiff91
3 жыл бұрын
I have a Qx7 Access but when i push the throttle on betaflight the roll moves!! so all of them are mixed up!
@ninjamonkeyfpv8855
3 жыл бұрын
Check out Bardwells videos.. JC has passed and won't be able to reply and help you.. R.I.P. JC aka Project Blue Falcon.. gone but not forgotten..
@terrymurphy562
7 жыл бұрын
Hi, tried to set my endpoints with subtrims on my dx6. I know it is to be set to 1000, 1500, and 2000 in betaflight. I seem to be only able to put one setting in at a time and able to save it. I am unable to set all 3 endpoints for each channel and save. Any one able to help with this problem, it would be appreciated. Cheers. Terry
@quadbrofpv9727
7 жыл бұрын
terence murphy He's unfortunately not alive anymore, he can't help you, sorry.
@EdwinRodriguezRicandragon
5 жыл бұрын
great video helped me a lot!
@AllanSanderson77
7 жыл бұрын
Isn't it better to adjust the subtrim on the outputs screen, rather than the PPM center? Changing the PPM centre also adjusts the min/max points meaning that you need to fix them every time you change it. Also, if do a large adjustment to PPM center, you might not be able to adjust the min/max values enough to reach 1000/2000 any more.
@imager09tube
6 жыл бұрын
Are you able to do a cal with a DX8? Thanks....
@Valdemar1
3 жыл бұрын
Centrering the throttle..realy..and whats that for...
@Frank-Y
4 жыл бұрын
My throttle goes to 1750. How to fix this?
@seanharrison6285
7 жыл бұрын
what mode is his transmitter
@ericeves6452
7 жыл бұрын
Hey JC! Does this adjustment effect the radio as a whole or does it just effect each model?
@aviah11
7 жыл бұрын
only that model
@MorningView
7 жыл бұрын
Excellent Thank You
@stonefpvthor
3 жыл бұрын
Can you give me some tips on this topic?
@ianrice1778
6 жыл бұрын
Ok so I'm having this issue where when I go full throttle I get this yaw kick where it feels and looks like the quad is being yawed to the right. I found out that my radiolink at9 throttle/yaw gimbal does not stay at 1500. I set endpoints I subtrim and if I touch the stick once it will go way off 1500 and will go to a number of like 1516 that I see. this happens on the one quad with the emax 2300kv redbottoms but the other quad with the iflyrc 2580kv motors and different RX but same radiolink TX I only see slight yaw twitches. Now I had the arris x220 and had this same exact issue then when I weas told to go set subtrim and did a test flight this was flying perfect!!! And I was using my flysky fsi6 TX. The flysky TX endpoints are almost spot on. It will stay on 1500 to 1499 and that's it. So It seems like I know the problem but I'm puzzled how the other quad with the higher kv does get as affected by the yaw kick. Maybe some one with more knowledge can shed some light on this issue for me. I'm not good at tuning or building these things but I can fly pretty dam good ;0 thank you guys!!!
@mrtob2027
6 жыл бұрын
kzitem.info/news/bejne/jnur23anep1-kno Had the same thing. this will sorted the yaw/rudder problem on my qx7. maby your radio can do something similar
@ianrice1778
6 жыл бұрын
Hey thanks man!!! I'm going to check this out. I actually don't have that quad put together right now cuz I used it for parts on another one. But I'm very appreciative for your help!!!!
@shaneintegra
2 жыл бұрын
RIP :'(
@bobfin4291
5 жыл бұрын
Nice vid but is the TX connected to the PC via USB
@jbw5485
5 жыл бұрын
Bob Fin no. The flight controller is connected via mini usb. TX is binded to the RX which is wired to the FC flight controller.
@godsun358
5 жыл бұрын
DAYUM you good bruh nice video I'm a subscriber and will be in touch I built 2 quads as a newbie and I'm stuck
@tecnofpv9202
7 жыл бұрын
My min values in my taranis is at -100 but in cleanflight at 1007 and can't go lower anymore.
@nigew
7 жыл бұрын
Mine too. I've seen another video where he has the max and min at -500, but if you cant move higher than the minimum, what do you do? Let me know if you find the solution.
@censrd
7 жыл бұрын
I found a semi solution, it still doesn't quite get me to perfect 1000/2000 but at least closer than i can get otherwise, on page 2/13 in your selected model. and about 13 clicks down the page you will find "Extended Limits" Select that and it should open up the end points further.
@tecnofpv9202
7 жыл бұрын
That works for me. Thanks!
@censrd
7 жыл бұрын
tecno pro FPV no worries, happy flying!
@rtcfpv1012
7 жыл бұрын
What if the midpoints are off?
@jussa101
7 жыл бұрын
Ronn2664 same here for some reason my fc thinks center stick is 1495
@rtcfpv1012
7 жыл бұрын
jussa101 fixed mine adjust midpoints using subtrim.
@jussa101
7 жыл бұрын
Ronn2664 how did you do that? In the same menu there's something to the right from what I see on his video. Did you just increase that till you got 1500? Appreciate the reply.
@jussa101
7 жыл бұрын
Ronn2664 hey figured it out thank you :) appreciate it.
Пікірлер: 80