Not sure about others, but the 2013 KX250F cams have a hole on the cam lole and cam gear that should line up.
@karlincoblentz5881
Жыл бұрын
Thanks for the video it might held me diagnose my 2009 kx250f
@humpday2267
3 жыл бұрын
Thanks for the tips on how to tell if a single jingle Honda cam will be off or not. Just built a 250r and it won’t start for the life of me. This is definitely my issue
@prust592
3 жыл бұрын
Hi, thanks for the video. I think I faced this problem on my crf250 07 '. May I ask you to replace the angle between the marks on the gear and the top of the cams on the new camshaft. Thanks
@Tater4200
Жыл бұрын
What about a 2021 crf250rx?? Timing marks are lined up. But my lobes are not even. Not even close... the exhaust love is at like 10:30 11 o'clock (standing on left side of bike) and intake lobe is at the 3 o'clock position.
@lemontebrown566
3 жыл бұрын
I have this problem on crf150r single cam thought my piston went but I looked and notice my auto decomposition is hitting the bolt how can I fix it
@DRX34U
Жыл бұрын
Just worked out this happened to a 2010 KX250f. pulled top end down and still AOK no valve/piston issue. I got lucky 👍 wish I realised this shit happens 3hrs ago scratching my head trying to work out what’s going on 😂 good video 👍
@zakokiller
3 жыл бұрын
drz400 wouldnt start, went to check timing and my intake cam gear and done a perfect 180 on the cam. exhaust and intake cam where both sitting a 10'o'clock when the gears were timed on the marks.. also one of the valve buckets on the intake side was cracked and was stuck in the head? i think oil loss on the intake side caused this should i take the head off and inspect cylinder/piston and valves?
Пікірлер: 9